brake light DODGE DURANGO 2020 Vehicle Warranty

•Misapplication,

improper
maintenance,
racing,
underinflation,
overinflation
or
other
abuse
• Operation

without
a
properly
functioning
low
pressure
warning
system,
for
Comp
T/A®
ZR
SSS
tires
• Uneven

or
rapid
wear
which
is
caused
by
mechanical
irregularity
in
the
vehicle
such
as
wheel
misalignment,
(a
measured
tread
difference
of
2/32
nds
of
an
inch
(1.6
mm)
or
more
across
the
tread
on
the
same
tire)
• Accident,
fire,
chemical
corrosion,
tire
alteration
or
vandalism
• Flat
spotting
caused
by
improper
storage
or
brake
lock
• The

adding
of
liquid,
solid
or
gaseous
materials
other
than
air
,
nitrogen
or
carbon


dioxide
(for
example,
waterbase
sealers
or
balancing
substances)
• Ozone
or
weather
checking
HOW REPLACEMENT CHARGES ARE CALCULATED
Passenger And Light Truck Tires Workmanship/Materials
BFGOODRICH TIRES
A
tire
which
becomes
unserviceable
due
to
a
condition
covered
by
this

workmanship
and
materials
limited
warranty
will
be
replaced
with
a

comparable
new
BFGoodrich
brand
tire,
free
of
charge,
when
2/32
nds
of

an
inch
(1.6
mm)
or
less
of
the
original
tread
is
worn,
(or
25%
or
less,

whichever
is
mor
e
beneficial
to
you)
and

within
12
months
of
the
date
of

purchase.
The
cost
of
mounting
and
balancing
the
tire
is
included.
Yo u

pay
the
cost
of
any
other
service
charges
and
applicable
taxes.
When
more
than
2/32
nds
of
an
inch
(1.6
mm)
of
the
original
tread
has

been
worn
(or
more
than
25%,
whichever


is
more
beneficial
to
you)
or

after
12
months
from
the
date
of
purchase,
you
must
pay
the
cost
of
a

comparable
new
BFGoodrich
brand
passenger
or
light
truck
replacement

tire
on
a
prorated
basis.
The
retailer
shall
determine
the
charge
by

multiplying
the
percentage
of
the
original
usable

tread
worn
by
the

current
selling
price
at
the
adjustment
location
or
the
price
on
the
current

BFGoodrich
brand
‹ase
™rice
•ist,
whichever
is
lower.
This
list
is
based

on
a
predetermined
price
intended
to
fairly
represent
the
actual
selling

price
of
the
tire.
Yo u
pay
the
cost
of


mounting,
balancing,
BOE
any
other
service

charges
and
applicable
taxes.
28

STORING YOUR TIRES
When storing your tires for any extended period of time, be sure to
thoroughly clean your tires with a tire brush, soap, and water to remove
any dirt, salt, and brake dust from the tires. If you are storing your tires
still mounted on the wheels, use a wheel brush and approved wheel
cleaner to clean your wheels. Then dry the wheels and tires with a towel
and allow them to fully dry. DO NOT apply any tire dressings while
storing your tires. Tire compounds are made to resist weather cracking
and ozone damage. Place each clean and dry tire in an airtight plastic bag
and seal the bag with tape to help reduce oil evaporation. Store your tires
out of direct sunlight and somewhere that is well shielded from the
elements, like a climate-controlled room or dry basement. Storing the
tires in a garage or shed usually exposes the tires to a wide range of
temperatures as well as precipitation and humidity. Keep the tires away
from sources that emit ozone like electric motors that use contact brushes,
furnaces, sump pumps, etc. Although tires will still age regardless of how
they are stored, these precautions will help slow the aging process and
reduce the damage to your tires.
SPEED LIMITS
WARNING!
Operating your vehicle in excess of the posted speed limit or the
maximum speed allotted by driving conditions has the potential to
be dangerous. Higher driving speeds create excessive heat buildup
in a tire, leading to a possible tire failure.
TIRE SPINNING
WARNING!
Spinning a tire to get a stuck vehicle out of mud, ice, snow, sand, or
wet grass can be potentially dangerous. A spinning tire at a
speedometer reading above 55 km/h (35 mph) can be capable of
disintegrating a tire with explosive force. In some circumstances, a
tire may be spinning at twice the speed displayed on the
speedometer. This can cause serious injury or death to you, a
passenger, or bystander. Never spin a tire above 55 km/h (35 mph).
FALKEN TIRE CORPORATION
101

WARNING!(Continued)
Pull over to a safe area as soon as possible and inspect the tires for
signs of bulges, blisters, or separations. Seek roadside assistance or
change the damaged tire with your spare tire.
If you experience a blowout or a sudden tire failure, the following
information should be helpful:
• When the tire failure occurs, you may hear a loud noise, or feel a
vibration, and/or the vehicle may pull toward the side of the failed
tire. Do not abruptly brake or turn.
• Maintain steady pressure on the accelerator pedal.
• Hold the steering wheel firmly and steer to maintain your lane
position.
• Find a safe place to pull off the road and allow the vehicle to gradually
decelerate. Apply light braking as required to stop safely.
• Gradually pull over to the shoulder and come to a stop. Look for a
damaged tire on your vehicle.
• Seek roadside assistance or change the damaged tire with your spare
tire.
• Have all of your tires and the vehicle thoroughly inspected by a tire
professional.
TIRE ROTATION
The purpose for rotating tires is to achieve more uniform wear for all tires
on a vehicle. Your tires should be thoroughly examined on a lift by a tire
dealer for any abnormalities. If tires show uneven treadwear, ask the
service person to check and/or correct any vehicle wheel alignment or
other mechanical problem before rotation.
The following rotation patterns are acceptable. Please refer to your
vehicle Owner ’s Manual for rotation advice.
TOYO TIRES – LIMITED WARRANTY
241