Back-up DODGE NEON 1997 1.G Wiring Diagrams User Guide

Downloaded from www.Manualslib.com manuals search engine STOP LAMPS
Circuit F32 in the Power Distribution Center
(PDC) feeds the stop lamps. Circuit F32 connects to
the stop lamp switch. A 15 amp fuse in the PDC pro-
tects circuit F32.
When the operator presses the brake pedal, the
stop lamp switch CLOSES and connects circuit F32
to circuit L50. Circuit L50 connects to the stop
lamps. Circuit L50 also splices to power the CHMSL
lamp.
GROUND CIRCUIT
Circuit Z1 provides ground for the stop lamps,
CHMSL lamp, and the stop lamp switch. The Z1 cir-
cuit has more than one grounding point. It also sup-
plies ground path for the tail lamps, parking lamps,
headlamps, side marker lamps, rear license plate
lamp, back-up lamps and turn signals.
HELPFUL INFORMATION
²Check for blown fuses in circuit F32 (in PDC).
²Check for continuity across the stop lamp switch
when it is CLOSED.
²For rear lighting on the left side of the vehicle,
the Z1 circuit grounding point is in the left rear
wheel well.
²For rear lighting on the right side of the vehicle,
the Z1 circuit grounding point is in the right rear
wheel well.
²For the stop lamp switch, the Z1 circuit ground-
ing point is in the left front inner fender shield.
BACK-UP LAMPS
In the RUN position, the ignition switch connects
circuit A2 from the Power Distribution Center (PDC)to circuit A22. Circuit A22 feeds a bus bar in the fuse
block. A 40 amp fuse in the PDC protects the A2 and
A22 circuits.
Circuit F20 is one of four circuits that connects to
the fuse block bus bar fed by circuit A22. Circuit F20
supplies power to the back-up lamp switch. On 3±spd
automatic transaxle vehicles, the back-up lamp
switch is part of an assembly that includes the park/
neutral position switch.
When the operator puts the transmission in
REVERSE, the back-up lamp switch connects circuit
F20 to circuit L1. Circuit L1 feeds the back-up lamps.
A 10 amp fuse, in cavity 8 of the fuse block, protects
F20 and L1 circuits.
GROUND CIRCUIT
Circuit Z1 provides ground for the back-up lamps.
The Z1 circuit has more than one grounding point. It
also supplies ground path for the tail lamps, parking
lamps, headlamps, side marker lamps, rear license
plate lamp, stop lamps and turn signals.
HELPFUL INFORMATION
²Check for blown fuses in circuits A2 and F20.
²Check for continuity across the stop lamp switch
when it is CLOSED.
²For rear lighting on the left side of the vehicle,
the Z1 circuit grounding point is in the left rear
wheel well.
²For rear lighting on the right side of the vehicle,
the Z1 circuit grounding point is in the right rear
wheel well.
²Circuit F20 feeds the heated rear window switch
and A/C clutch cycling switch.
8W - 51 - 10 8W - 51 REAR LIGHTINGPL
DESCRIPTION AND OPERATION (Continued)

Downloaded from www.Manualslib.com manuals search engine 8W-52 TURN SIGNALS
INDEX
page page
DESCRIPTION AND OPERATION
HAZARD FLASHERS..................... 5TURN SIGNALS......................... 5
DESCRIPTION AND OPERATION
TURN SIGNALS
Voltage for the turn signals flows from the Power
Distribution Center (PDC) to the ignition switch on
circuit A2. With the key in the RUN position, the
ignition switch connects voltage from the A2 circuit
to the A22 circuit. A 40 amp fuse in the PDC protects
the A2 and A22 circuits.
Circuit A22 connects to a bus bar in the fuse block.
L5 is one of the circuits fed by the bus bar. Circuit
L5 contains a 10 amp fuse and supplies voltage to
the multi-function switch. The multi- function switch
supplies voltage to the combination flashing unit on
circuit L55. Voltage leaves the combination flashing
unit on circuit L32 and flows to the multi-function
switch connector.
RIGHT TURN SIGNAL
When the operator selects the right turn signal,
the multi-function connects power from circuit L32 to
circuits L60 and L62. Circuit L62 connects to the
multi-function switch and feeds the right rear turn
signal/hazard flasher/stop lamp.
Circuit L60 connects to the multi-function switch
and feeds the right front turn signal/hazard flasher
lamp and side marker lamp. Circuit L60 also splices
to power the turn signal indicator lamp on the
instrument cluster.
LEFT TURN SIGNAL
When the operator selects the left turn signal, the
multi-function connects power from circuit L32 to cir-
cuits L61 and L63. Circuit L63 connects to the multi-
function switch and feeds the left rear turn signal/
hazard flasher/stop lamp.
Circuit L61 connects to the multi-function switch
and feeds the left right front turn signal/hazard
flasher lamp and side marker lamp. Circuit L61 also
splices to power the turn signal indicator lamp on the
instrument cluster.
GROUND CIRCUIT
Circuit Z1 provides ground for all the turn signal
lamps, although the it has different grounding pointsfor each turn signal circuit. Circuit Z2 provides the
ground path for the combination flashing unit.
HELPFUL INFORMATION
²For the left front turn signal/hazard flasher
lamp, the Z1 circuit grounding point is the left side of
the radiator closure panel.
²For the right front turn signal/hazard flasher
lamp, the Z1 circuit grounding point is in the right
fender side shield.
²For the left rear turn signal/hazard flasher/stop
lamp, the Z1 circuit grounding point is in the left
rear wheel well.
²For the right rear turn signal/hazard flasher/
stop lamp, the Z1 circuit grounding point is in the
right rear wheel well.
²Circuit Z1 also supplies ground for the head-
lamps, parking lamps, rear license plate lamp,
back-up lamps and side marker lamps.
²The grounding point for circuit Z2 is the instru-
ment panel right center support. Circuit Z2 supplies
ground for the combination flashing unit.
²A 10 amp fuse, in cavity 6 of the fuse block, pro-
tects circuit L5.
²A 40 amp fuse in the PDC protects the A2 and
A22 circuits.
²The bus bar in the fuse block that connects to
circuit A22 and feeds circuit L5 for the turn signals
also powers three other fuse protected circuits. The
other circuits are C1, F20 and F25.
HAZARD FLASHERS
Circuit L9 from the Power Distribution Center
(PDC) supplies battery voltage for the hazard flash-
ers. A 10 amp fuse in the PDC protects circuit L9.
Circuit L9 connects to the multi-function switch.
With the hazard flashers ON, the multi-function
switch connects circuits L9 and L55.
Circuit L55 feeds the combination flashing unit.
Circuit Z2 provides ground for the flashing unit.
From the flashing unit, circuit L32 connects to the
multi-function switch. With the hazard flashers ON,
the multi-function switch connects circuit L32 to cir-
cuits L60, L61, L62, and L63.
PL8W - 52 TURN SIGNALS 8W - 52 - 5

Downloaded from www.Manualslib.com manuals search engine Circuit L60 supplies voltage to the right front turn
signal/hazard lamp. The L60 circuit splices to the
instrument cluster to power the right indicator lamp.
Circuit L61 supplies voltage to the left front turn
signal/hazard lamp. The L61 circuit splices to the
instrument cluster to power the left indicator lamp.
Circuit L62 supplies voltage to the right rear turn
signal/hazard flasher/stop lamp.
Circuit L63 supplies voltage to the left rear turn
signal/hazard/flasher/stop lamp.
GROUND CIRCUITS
Circuit Z3 provides ground for the instrument clus-
ter indicator lamps. The termination point for circuit
Z3 is the instrument panel left center support.
Circuit Z1 provides ground for all the turn signal/
hazard lamps, although the it has different ground-
ing points for each circuit. Circuit Z2 provides the
ground path for the combination flashing unit.
HELPFUL INFORMATION
²For the left front turn signal/hazard flasher
lamp the Z1 circuit grounding point is the left side of
the radiator closure panel.²For the right front turn signal/hazard flasher
lamp the Z1 circuit grounding point is in the right
fender side shield.
²For the left rear turn signal/hazard flasher/stop
lamp the Z1 circuit grounding point is in the left rear
wheel well.
²For the right rear turn signal/hazard flasher/
stop lamp the Z1 circuit grounding point is in the
right rear wheel well.
²Circuit Z1 also supplies ground for the head-
lamps, parking lamps, rear license plate lamp,
back-up lamps and side marker lamps.
²The grounding point for circuit Z2 is the instru-
ment panel right center support. Circuit Z2 supplies
ground for the combination flashing unit.
8W - 52 - 6 8W - 52 TURN SIGNALSPL
DESCRIPTION AND OPERATION (Continued)

Downloaded from www.Manualslib.com manuals search engine 8W-80 CONNECTOR PIN-OUTS
INDEX
page
SCHEMATICS AND DIAGRAMS........................................................... 1
Component Page
A/C Compressor Clutch................8W-80-4
A/C Cycling switch...................8W-80-4
A/C-Heater Blower Motor..............8W-80-4
A/C-Heater Control Switch.............8W-80-4
A/C High Pressure Switch..............8W-80-4
A/C Low Ptressure Switch..............8W-80-5
ABS Hydraulic Modulator..............8W-80-5
ABS Relay Box......................8W-80-5
Airbag Control Module................8W-80-5
Ash Receiver lamp...................8W-80-6
Back-Up Lamp Switch (MTX)...........8W-80-6
Battery Temperature Sensor............8W-80-6
Blower Motor Resister Block............8W-80-6
Brake Warning Lamp Switch...........8W-80-6
C101..............................8W-80-7
C102..............................8W-80-7
C103..............................8W-80-7
C105..............................8W-80-8
C108..............................8W-80-8
C160..............................8W-80-8
C161..............................8W-80-8
C203..............................8W-80-9
C205..............................8W-80-9
C206..............................8W-80-9
C225..............................8W-80-9
C230.............................8W-80-10
C231.............................8W-80-10
C241.............................8W-80-10
C301.............................8W-80-11
C303.............................8W-80-11
C309.............................8W-80-11
C315.............................8W-80-11
C323.............................8W-80-11
C324.............................8W-80-11
C325.............................8W-80-12
C340.............................8W-80-12
C341.............................8W-80-12
Camshaft Position Sensor.............8W-80-12
Clockspring........................8W-80-12
Clutch Pedal Position Switch (MTX).....8W-80-12
Controller Anti-Lock Brake............8W-80-13
Crankshaft Position Sensor............8W-80-14
Data Link Connector.................8W-80-14
Dome Lamp........................8W-80-14
Downstream Heated Oxygen Sensor.....8W-80-15Component Page
Driver Side Airbag..................8W-80-15
Duty Cycle Evap/Purge Solenoid........8W-80-15
EGR Transducer solenoid.............8W-80-15
Engine Coolant Temperature
Sensor (ECT).....................8W-80-15
Engine Oil Pressure Switch............8W-80-16
Front Fog Lamp Switch...............8W-80-16
Fuel Injector No.1...................8W-80-16
Fuel Injector No.2...................8W-80-16
Fuel Injector No.3...................8W-80-16
Fuel Injector No.4...................8W-80-16
Fuel Pump Module..................8W-80-17
Generator.........................8W-80-17
Glove Box Lamp and Switch...........8W-80-17
Headlamp Dimmer and Optical
Horn Switch.....................8W-80-17
Headlamp Leveling Switch............8W-80-17
Headlamp Switch...................8W-80-17
Horn No.1.........................8W-80-18
Horn No.2.........................8W-80-18
(IAT/Map) Sensor...................8W-80-18
Idle Air Control Motor (IAC)...........8W-80-18
Ignition Coil Pack...................8W-80-18
Ignition Switch.....................8W-80-19
Immobilizer Engine Sensor............8W-80-19
Immobilizer Sensor..................8W-80-19
Instument Cluster - C1...............8W-80-19
Instument Cluster - C2...............8W-80-19
Intermittent Wipe/Wash Switch........8W-80-20
Key-In Switch......................8W-80-20
Knock Sensor......................8W-80-20
Left Airbag Impact Sensor.............8W-80-20
Left Back-Up Lamp..................8W-80-20
Left Door Lock Switch................8W-80-21
Left Door Window Motor..............8W-80-21
Left Fog Lamp......................8W-80-21
Left Front Door Lock Motor...........8W-80-21
Left Front Door Speaker..............8W-80-21
Left Front Wheel Speed Sensor.........8W-80-22
Left Headlamp.....................8W-80-22
Left Headlamp Leveling Motor.........8W-80-22
Left Instrument Panel Speaker
(Premium).......................8W-80-22
Left License Lamp...................8W-80-22
Left Park/Turn Signal Lamp...........8W-80-22
8W - 80 - 2 8W - 80 CONNECTOR PIN-OUTSPL

Downloaded from www.Manualslib.com manuals search engine Component Page
Left Power Mirror...................8W-80-23
Left Power Window Switch............8W-80-23
Left Rear Door Lock Motor............8W-80-23
Left Rear Fog Lamp.................8W-80-23
Left Rear Speaker...................8W-80-23
Left Rear Wheel Speed Sensor.........8W-80-23
Left Repeater Lamp.................8W-80-24
Left Tail/Stop Lamp.................8W-80-24
Left Turn Signal Lamp...............8W-80-24
Map/Reading Lamps.................8W-80-24
Master Power Window Switch..........8W-80-24Component Page
Park/Neutral Position Switch (ATX).....8W-80-25
Passenger Side Airbag................8W-80-25
Power Folding Mirror Relay...........8W-80-25
Power Mirror Fuse Holder............8W-80-25
Power Mirror Switch - C1.............8W-80-25
Power Mirror Switch - C2.............8W-80-26
Power Steering Pressure Switch........8W-80-26
Power Sunroof Motor.................8W-80-26
Powertrain Control Module - C1........8W-80-26
Powertrain Control Module - C2........8W-80-27
PRNDL Lamp......................8W-80-28
Radiator Fan Motor..................8W-80-28
Radio - C1.........................8W-80-28
Radio - C2.........................8W-80-29
Rear Fog Lamp Switch...............8W-80-29
Rear Window Defogger Switch.........8W-80-29
Right Airbag Impact Sensor...........8W-80-29
Right Back-Up Lamp.................8W-80-29
Right Door Lock Switch...............8W-80-30
Right Door Window Motor.............8W-80-30
Right Fog Lamp....................8W-80-30
Right Front Door Lock Motor..........8W-80-30
Right Front Door Speaker.............8W-80-30
Right Front Wheel Speed Sensor........8W-80-31
Right Headlamp....................8W-80-31
Right Headlamp Leveling Motor........8W-80-31
PL8W - 80 CONNECTOR PIN-OUTS 8W - 80 - 3
DESCRIPTION AND OPERATION (Continued)

Downloaded from www.Manualslib.com manuals search engine 978W-1
PL-RHD 8W - 80 - 6 8W-80 CONNECTOR PIN-OUTS
PLR08006
CAV CIRCUIT FUNCTION
1 E2 22OR FUSED PANEL LAMPS DIMMER SWITCH SIGNAL
2 Z3 20BK/OR GROUND BLACK12
ASH
RECEIVER
LAMP
BACK-UP LAMP
SWITCH (MTX)GRAY
CAV CIRCUIT FUNCTION
A L1 20VT/BK REVERSE LAMP SENSE
B F20 20WT FUSED IGNITION SWITCH OUTPUT (RUN)ABAB
CAV CIRCUIT FUNCTION
1 K4 18BK/LB SENSOR GROUND
2 G31 18VT/LG AMBIENT TEMPERATURE SENSOR SIGNAL
2
1 54
3
CAV CIRCUIT FUNCTION
1 C5 14LG M1 BLOWER MOTOR DRIVER
2 C6 14LB M2 BLOWER MOTOR DRIVER
3Ð Ð
4 C7 14BK/TN HIGH BLOWER MOTOR DRIVER
5 C4 14TN LOW BLOWER MOTOR DRIVER
BLOWER MOTOR
RESISTOR
BLOCK
3 25 4
1BLACK
CAV CIRCUIT FUNCTION
1 G9 20GY/BK RED BRAKE WARNING LAMP DRIVER
2 Z1 20BK GROUND
BRAKE WARNING
LAMP SWITCH
BATTERY
TEMPERATURE SENSOR12
BLACK
BLACK
21

Downloaded from www.Manualslib.com manuals search engine 978W-1
PL-RHD 8W - 80 - 20 8W-80 CONNECTOR PIN-OUTS
PLR08020
CAV CIRCUIT FUNCTION
1 G16 20BK/LB LEFT FRONT DOOR JAMB SWITCH SENSE
2 G26 20LB KEY-IN IGNITION SWITCH SENSE
GREEN
KEY-IN SWITCH
2 1
CAV CIRCUIT FUNCTION
1 K42 20DB/LG*KNOCK SENSOR SIGNAL
1 K42 20BK/LGlKNOCK SENSOR SIGNAL
2 K4 20BK/LB SENSOR GROUND
BLACK
*2.0L SOHC ENGINEl2.0L DOHC ENGINE
**WITH INTERMITTENT WIPERS 21
KNOCK
SENSOR
CAV CIRCUIT FUNCTION
1 R47 18DB/LB LEFT IMPACT SENSOR LINE 1
2 R49 18LB LEFT IMPACT SENSOR LINE 2
BLACK
21
LEFT
AIRBAG IMPACT SENSOR
LEFT BACK-UP
LAMP
CAV CIRCUIT FUNCTION
1 L1 18VT/BK BACK-UP LAMP SENSE
2 Z1 18BK GROUND
CAV CIRCUIT FUNCTION
1 Z2 22BK/LG**GROUND
2 V5 18DG/YL WIPER RELAY COMMON
3 V10 18BR WINDSHIELD WASHER RELAY OUTPUT
4 V3 18BR/WT WIPER SWITCH LOW SPEED OUTPUT
5 F13 18DB FUSED IGNITION SWITCH OUTPUT (RUN/ACC)
6 V4 18RD/YL WIPER SWITCH HIGH SPEED OUTPUT
GRAY
INTERMITTENT
WIPE/WASH
SWITCH 61
2 1
BLACKGRAY

Downloaded from www.Manualslib.com manuals search engine 978W-1
8W - 80 - 29 PL-RHD 8W-80 CONNECTOR PIN-OUTS
PLR08029
CAV CIRCUIT FUNCTION
1Ð Ð
2 X55 22BR/RD LEFT FRONT SPEAKER (Ð)
3 X56 22DB/RD RIGHT FRONT SPEAKER (Ð)
4 L7 20BK/YL PARK LAMP SWITCH OUTPUT
5 E2 22OR FUSED PANEL LAMPS DIMMER SWITCH SIGNAL
6 X12 20RD/WT FUSED IGNITION SWITCH OUTPUT (ACC/RUN)
7 M1 22 PK FUSED B(+)
CAV CIRCUIT FUNCTION
1 E2 220R FUSED PANEL LAMPS DIMMER SWITCH SIGNAL
2 Z2 22BK/LG GROUND
3 F20 22WT FUSED IGNITION SWITCH OUTPUT (RUN)
4 A4 14BK/RD FUSED B(+)
5 C15 14BK/WT REAR WINDOW DEFOGGER RELAY OUTPUT
BLACK
51
REAR WINDOW
DEFOGGER SWITCH
CAV CIRCUIT FUNCTION
1 R46 18BR/LB RIGHT IMPACT SENSOR LINE 1
2 R48 18TN RIGHT IMPACT SENSOR LINE 2
BLACK
21
RIGHT
AIRBAG IMPACT SENSOR
RIGHT BACK-UP
LAMP
CAV CIRCUIT FUNCTION
1 L1 18VT/BK BACK-UP LAMP SENSE
2 Z1 18BK GROUND
RADIO - C2
GRAY
71
CAV CIRCUIT FUNCTION
1– –
2 F61 18WT/OR FOG LAMP FEED
3 L38 18BR/WT REAR FOG LAMP FEED
4 L2 14LG HEADLAMP SWITCH FEED
5 Z3 22BK/OR GROUND
5 Z3 20BK/OR GROUND
6 E2 22OR FUSED ILLUMINATION FEED
7 L35 20BR/RD FRONT FOG LAMP FEED
8– –
REAR FOG
LAMP SWITCH
18
GREEN
2 1
GRAY

Downloaded from www.Manualslib.com manuals search engine 8W-90 CONNECTOR/GROUND LOCATIONS
DESCRIPTION AND OPERATION
INTRODUCTION
This section provides illustrations identifying the
general location of components, grounds, and connec-
tors in the vehicle. A index is provided. Use the wir-
ing diagrams in each section for connector/groundnumber identification. Refer to the index for the
proper figure number.CONNECTOR/GROUND LOCATIONS
For items not shown in this section a N/S is placed
in the Fig. column.
Connector
Name/NumberColor Location Fig.
A/C Compressor
ClutchBK Top of
Compressor8
A/C Cycling Switch BK Center of HVAC
HousingN/S
A/C-Heater Blower
MotorBK RT Side of
HVAC HousingN/S
A/C-Heater Control
SwitchBK Rear of Control 13
A/C High Pressure
SwitchGY Top of A/C
Compressor8
A/C Low Pressure
SwitchBK LT Side of Cowl
PanelN/S
ABS Hydraulic
ModulatorDK/
GYTop of Hydraulic
UnitN/S
ABS Relay Box BK Top of Hydraulic
UnitN/S
Airbag Control
ModuleYL Rear of
Gearshift11
Ash Receiver Lamp BK At Lamp 13
Back-Up Lamp
SwitchGY Top of
Transmission3
Battetry
Temperature
SensorBK Bottom of
Battery Tray6
Blower Motor
Resistor BlockNAT Left Side Cowl
To pN/S
Brake Warning
Lamp SwitchBK Right Frame
RailN/S
C101 BR Top of I.P. 13
C102 BK Top of I.P. 13
C103 BL Top of I.P. 13
C105 BL Right Kick Panel N/S
C108 BK Left Lower Cowl N/S
C160 LT/
GYLeft Fender Side
Shield5Connector
Name/NumberColor Location Fig.
C161 BK Left Fender Side
Shield5
C203 BK Left Side of I.P. N/S
C205 BL Left Kick Panel 13
C206 BL Top Left of I.P. N/S
C225 RD Left Kick Panel 9
C230 GY Right Kick Panel 14
C231 BL Right Kick Panel N/S
C241 BK Right Side of I.P. N/S
C301 GY Right B-Pillar 15
C303 GY Right B-Pillar 15
C309 BK Left Trunk Area 18
Camshaft Position
SensorBK Left Side of
Engine7
Clockspring NAT Rear of
Clockspring10
Clutch Pedal
Position SwitchBK Top of Clutch
Pedal2
Controller Anti-Lock
BrakeBK Left Side Kick
PanelN/S
Crankshaft Position
SensorBK Rear of Engine 7
Datalink Connector BK Left Side of
Steering ColumnN/S
Dome Lamp BK Left C- Pillar 16
Downstream
Heated Oxygen
SensorBK Rear of Catalytic
ConverterN/S
Driver Side Airbag YL Rear of
Clockspring10
Duty Cycle/EVAP
Purge SolenoidGY Right Frame
Rail4
Engine Coolant
Temp SensorBK Left Side of
Engine7
PL8W - 90 CONNECTOR/GROUND LOCATIONS 8W - 90 - 1

Downloaded from www.Manualslib.com manuals search engine Connector
Name/NumberColor Location Fig.
Engine Oil Pressure
SwitchGN Rear of Engine 7
EGR Transducer
SolenoidGY Left Rear of
Engine7
Front Fog Lamp
SwitchGN Rear of Switch 14
Fuel Injector #1 BK At Injector 8
Fuel Injector #2 BK At Injector 8
Fuel Injector #3 BK At Injector 8
Fuel Injector #4 BK At Injector 8
Fuel Pump Module LT/
GYRight Rear
Frame Rail19
Generator BK Rear of
Generator7
Glove Box Lamp
and SwitchGY Rear of Switch 13
Headlamp Dimmer
and Optical Horn
SwitchBK Rear of Switch 10
Headlamp Leveling
SwitchBK Rear of Switch 10
Headlamp Switch BK Rear of Switch 14
Horn #1 BK Left Rear of
Fascia6
Horn #2 BK Left Rear of
Fascia6
Idle Air Control
MotorBK On Throttle
Body8
Ignition Coil Pack BK Top of Valve
Cover7
Ignition Switch BK Rear of Switch 10
Immobilizer Engine
SensorBK Right Fender
Side ShieldN/S
Immobilizer Sensor BK Top of I.P. N/S
Instrument Cluster
C1BK Rear of Cluster 14
Instrument Cluster
C2BK Rear of Cluster 14
Intake Air
Temp/MAP SensorBK Left Side of
Intake8
Intermittent
Wipe/Wash SwitchNAT Rear of Switch 10
Key-In Switch GN Rear of Switch 10
Knock Sensor GY Front of Engine 8Connector
Name/NumberColor Location Fig.
Left Airbag Impact
SensorGY Left Side of
Radiator Closure
Panel1
Left Back-Up Lamp GY At Lamp 20
Left Door Lock
SwitchWT At Switch 12
Left Door Window
MotorBK At Motor 12
Left Fog Lamp BK Rear of Lamp 4
Left Front Door
Lock MotorBK At Motor 12
Left Front Door
SpeakerBK At Speaker 12
Left Front Wheel
Speed SensorGY Left Fender Side
ShieldN/S
Left Headlamp BK At Lamp 6
Left Headlamp
Leveling MotorBK Rear of Left
HeadlampN/S
Left Instrument
Panel SpeakerBK At Speaker N/S
Left License Lamp NAT At Lamp 18
Left Park/Turn
Signal LampBK Rear of Lamp 6
Left Power Mirror BK At Mirror 12
Left Power Window
SwitchWT At Switch 12
Left Rear Door
Lock MotorBK Rear of Door 15
Left Rear Fog
LampNAT At Lamp N/S
Left Rear Speaker BK At Speaker 16
Left Rear Wheel
Speed SensorBK Left Rear Frame
RailN/S
Left Repeater Lamp BK At Lamp N/S
Left Tail/Stop Lamp BK At Lamp 20
Left Turn Signal
LampNAT At Lamp 6
Map/Reading
LampsBK At Lamp 9
Master Power
Window SwitchWT At Switch 12
Park/Neutral
Position SwitchBK Front of
Transmission3
Passenger Side
AirbagYL Left Side of I.P. 13
8W - 90 - 2 8W - 90 CONNECTOR/GROUND LOCATIONSPL
DESCRIPTION AND OPERATION (Continued)