Ignition switch FIAT 500 2018 Owner handbook (in English)

KNOWING YOUR CAR
78
Recording and transferring
trip data
The trip data can be stored in the
system memory and transferred using
a suitably configured USB memory
stick or by Uconnect™ LIVE app.
This allows you to display the history of
the collected data, showing the
complete analysis of the trip data and
of your driving style.
Further information is available at
www.driveuconnect.eu.
IMPORTANT Do not remove the USB
memory stick nor unpair the
smartphone and the Uconnect™ LIVE
App before the system has
downloaded the data, otherwise it
could be lost.
During the transfer of data to the
devices, messages may appear on the
radio display to guide the user
correctly through the operation; follow
these instructions. These messages
are only displayed with the ignition key
at STOP and when a delay in the
system switching off is set.
The data are automatically transferred
to the devices when the engine is
switched off. Transferred data will be
deleted from the system memory in
this manner. You can choose to store the trip data
or not, by pressing the “Settings”
button and by setting the storage
activation and the USB or Cloud
transfer mode.
REMARKS
When the USB memory stick is full, the
warning messages are shown on the
radio display.
When the eco:Drive™ data are not
transferred to USB memory stick for a
long time, the internal memory of the
Uconnect™ LIVE system may be
exhausted. Follow the instructions
given by the messages on the radio
display.
my:Car
my:Car allows you to keep the “health”
of your vehicle always under control.
my:Car can detect malfunction in real
time and inform the user about the
expiry of the servicing interval. Press
the “my:Car” button to interact with the
application.
The display will show a screen with the
“care:Index” section, which provides all
the detailed information about the
status of the vehicle. Press the “Active
warnings” button (if present) to showthe details of the vehicle’s faults which
caused a warning light to switch on.
The vehicle status can be seen both
on www.driveuconnect.eu or through
the Uconnect™ LIVE app.
Settings
Press the button on the front
panel to display the main “Settings”
menu.
NOTE The menu items displayed vary
according to the versions.
Indicatively, the menu is composed of
the following items:
❒ Display;
❒ Units;
❒ Voice commands;
❒ Clock & Date;
❒ Safety;
❒ Lights (for versions/markets, where
provided);
❒ Doors & Locks;
❒ Vehicle Off Options;
❒ Audio;
❒ Phone/ Bluetooth;

IN AN EMERGENCY
144
IF THE BATTERY IS
FLAT36)
IMPORTANT The battery recharging
procedure is provided for information
purposes only. You are advised to
contact a Fiat Dealership to have this
operation carried out.
IMPORTANT After turning the ignition
key to STOP and having closed the
driver’s side door, wait at least one
minute before disconnecting the battery
and then reconnecting the electrical
supply to the battery.
Charging should be slow at a low
ampere rating for approximately 24
hours. Charging for a longer time may
damage the battery.
Versions without Start&Stop
(for versions/markets, where provided)
To recharge, proceed as follows:
❒ disconnect the terminal from the
negative battery pole;
❒ connect the charger cables to the
battery terminals, making sure that
polarities are correct;
❒ turn on the charger;
❒ when you have finished, turn the
charger off before disconnecting the
battery;
❒ reconnect the terminal to the
negative battery pole.
Versions with Start&Stop
(for versions/markets, where provided)
To recharge, proceed as follows:
❒ disconnect the connector A fig. 132
(pressing the button B) from the
sensor C monitoring the battery
charge status, on the negative pole
D of the battery;
132DVDF0S0127c
❒ connect the positive cable of the
battery charger to the positive
battery pole E fig. 133 and the
negative cable to the terminal of
sensor D;
❒ turn on the charger. At the end of
the charging process, switch the
battery charger off;
❒ after having disconnected the
battery charger, reconnect
connector A to the sensor C as
shown in fig. 132.
133DVDF0S0128c

IMPORTANT INFORMATION AND RECOMMENDATIONS
188(CONTINUES)
PERSONAL SAFETY
(CONTINUED)
7) DAYTIME RUNNING LIGHTS (DRL)
•The daytime running lights are an alternative to the dipped
beam headlights for driving during the daytime in countries
where it is compulsory to have lights on during the day, and
they are also permitted in those countries where this is not
obligatory.
•Daytime running lights cannot replace dipped beam
headlights when driving at night or through tunnels.
•The use of daytime running lights is governed by the highway
code of the country in which you are driving. Comply with legal
requirements.
8) FUEL CUT-OFF SYSTEM
If, after an impact, you smell fuel or notice leaks from the fuel
system, do not reactivate the system to avoid the risk of fire.
9) INTERIOR FITTINGS
•The cigar lighter gets extremely hot. Handle it with caution and
do not allow it to be used by children to avoid the risk of fire or
burns. Always check that the cigar lighter has switched off.
•Only accessories with a maximum power of 180 W (maximum
absorption 15 A) can be connected to the socket.
•Never travel with the glove compartment open: it could injure
the passenger in the event of a crash.
•On both sides of the passenger side sun visor there is a label
remembering that it is compulsory to deactivate the airbags if a
rearward facing child restraint system is fitted.
Always comply with the instructions on the label.10) SUNROOF – ELECTRIC SOFT TOP
ELECTRIC WINDOWS
When leaving the car, always remove the key from the ignition
device to avoid the risk of injury to the vehicle occupants due to
accidental operation of these devices: improper use can be
dangerous. Before and during operation, always check that
nobody is exposed to the risk of being injured either directly by
the moving window or through objects getting
caught or hit by it.
11) SOFT TOP
•Keep hands away from the soft top mechanism while opening
and closing the soft top or if the soft top stops in a position before
the cycle is completed to prevent damage and injury.
•Keep children away from the area in which the top is folding
during opening or closing operations.
12) DOORS
Before opening a door, ensure that you can do it in conditions of
safety. Open the doors only when the vehicle is stationary.
13) LUGGAGE COMPARTMENT
•Never exceed the maximum allowed load in the luggage
compartment, see chapter “Technical specifications”. Also make
sure that the objects you place in the luggage compartment have
been properly secured, to avoid them from being thrown forward
consequent to sudden braking and injuring your passengers.
•Do not drive with the tailgate open as exhaust fumes may enter
the vehicle.
•If you are travelling in areas with few filling stations and you
want to transport fuel in a spare tank, comply with the law by
using only an approved, suitably secured tank. In the event of a
collision the fire risk is increased all the same.

IMPORTANT INFORMATION AND RECOMMENDATIONS
190(CONTINUES)
PERSONAL SAFETY
(CONTINUED)
•The HH system is not a parking brake, therefore do not leave
the vehicle without activating the handbrake, switching off the
engine, and engaging first gear, with the vehicle parked in safe
conditions.
•There may be situations on small gradients
(less than 8%), with car laden or a trailer attached to it (where
provided), in which the HH system may not activate, causing a
slight reversing motion and increasing the risk of collision with
another vehicle or object.
The driver is, in any case, responsible for safe driving.
•The HBA system cannot increase tyre grip on the road over
the limits imposed by laws of physics: always drive carefully
according to the conditions of the road surface.
•The HBA system is an aid for the driver, who must always pay
full attention while driving.
The responsibility always rests with the driver.
16) ENGINE BONNET
•Before opening the bonnet, check that windscreen wiper
arm is not lifted from the windscreen.
•The bonnet may drop suddenly if the supporting rod is not
positioned correctly.
Only perform these operations when the car is stationary.
•Be careful working inside engine compartment when the
engine is hot to avoid burning yourself. Do not place your
hands near the engine fan as it may be activated even when
the key is removed. Wait until the engine has cooled.
•Be very careful not to allow scarves, neck ties and other
loose articles of clothing from touching, even accidentally, any
moving parts. This may cause the clothing to be pulled into the
part, resulting in serious injury to the wearer. •For safety reasons, the bonnet must always be properly closed
while the car is travelling. Make sure that the bonnet is properly
closed and that the lock is engaged. If you notice when driving
that the bonnet has not been properly locked, stop immediately
and close the bonnet correctly.
•Use both hands to lift the bonnet. Before lifting, check that the
windscreen wiper arms are not raised from the windscreen, that
the vehicle is stationary and that the handbrake is engaged.
17) CONTROLS
•It is absolutely forbidden to carry out any after-market operation
involving steering system or steering column modifications
(e.g. installation of anti-theft device) that could adversely affect
performance and safety, invalidate the warranty and also result in
non-compliance of the vehicle with type-approval requirements.
•Before performing any maintenance operations, always stop
the engine and remove the key from the ignition to lock the
steering column (especially when the car wheels are not touching
the ground). If this is not possible (for example if the key needs to
be turned to MAR or the engine must be running), remove the
main fuse that protects the electric power steering.
18) PARKING SENSORS
Parking manoeuvres, however, are always the driver’s
responsibility. While carrying out these manoeuvres, always make
sure that no people (especially children) or animals are in the area
concerned.
The parking sensors are used to assist the driver, who must
never allow his attention to lapse during potentially dangerous
manoeuvres, even those executed at low speeds.

IMPORTANT INFORMATION AND RECOMMENDATIONS
194
Therefore, always deactivate the passenger airbag when a
rearward facing child restraint system is installed on the front
passenger seat.
The front passenger seat must also be positioned
back as far as possible in order to prevent the child restraint
system from coming into contact with the dashboard.
Immediately reactivate the passenger airbag as soon as the
child restraint system has been removed.
Also remember that, if the key is turned to STOP, none of the
safety devices (airbags or pretensioners) will be deployed in
the event of collision. Non-deployment in such cases does not
indicate a system malfunction.
•Do not wash the seats with water or pressurised steam
(wash by hand or at automatic seat washing stations).
• The front airbag is designed to be deployed for impacts of a
greater intensity than for the pretensioners. For impacts whose
intensity falls between the two levels, normally, only the
pretensioners will be activated.
•Do not affix rigid objects to the garment hooks or support
handles.
•The airbag does not replace seat belts but increases their
efficiency. Furthermore, since front airbags are not deployed in
low-speed frontal impacts, side impacts, rear shunts or roll-
overs, the passengers are protected only by the seat belts
which must therefore be fastened at all times.
•In some versions, in case of a LED
“fault (located on the
plate of the instrument panel), the warning light ¬on the
instrument panel turns on and the passenger side airbags are
deactivated. •Malfunction of the
¬warning light is indicated by the activation
of an airbag fault symbol and a dedicated message on the
instrument panel display (or, for versions where provided, by the
activation of a blinking generic fault warning light).
In this case, the warning light
¬may not indicate failures in the
retaining systems. Contact a Fiat Dealership immediately to have
the system checked.
•The
“warning light indicates the passenger side airbag
protection status. If the warning light is off, passenger side
protection is active: to deactivate it, use the Setup Menu (in this
case the LED lights up). When the vehicle is started (ignition key
turned to MAR position), the warning light turns on for about 8
seconds, provided that at least 5 seconds have elapsed from
when it was switched off. If not, contact a Fiat Dealership. If the
engine is switched off/on again in less than 5 seconds the
warning light may remain off. In this case, to check correct
warning light operation, switch the engine off, wait for at least 5
seconds and switch the engine on again. The warning light may
light up with various intensity levels depending on the vehicle
conditions. The intensity may also vary during the same key
cycle.
•When the ignition key is turned to MAR, the
“warning light
switches for few seconds, then if the passenger airbag protection
is active it should switch off.
26) STARTING THE ENGINE
•It is dangerous to run the engine in enclosed areas. The engine
takes in oxygen and releases carbon dioxide, carbon monoxide
and other toxic gases.
(CONTINUES)
PERSONAL SAFETY
(CONTINUED)

IMPORTANT INFORMATION AND RECOMMENDATIONS
198
PERSONAL SAFETY
(CONTINUED)
Do not use the jack for loads higher than the one shown on its
label. Never start the engine with vehicle raised. If the vehicle is
raised more than necessary, everything can become more
unstable, with the risk of the vehicle dropping violently.
Thus, lift the vehicle only as needed in order to access the
spare tyre.
33) FIX&GO QUICK TYRE REPAIR KIT
•The information required by the applicable regulation is
indicated on the Fix&Go kit package label. Carefully read the
label on the cartridge before use, avoid improper use. The kit
should be used by adults and cannot be used by children.
IMPORTANT: Do not exceed 80 km/h. Avoid sudden
acceleration or braking. The kit provides a temporary repair,
therefore the tyre must be examined and repaired by a
specialist as soon as possible. Before using the kit, ensure that
the tyre is not excessively damaged and that the rim is in good
condition, otherwise do not use it and call roadside assistance.
Do not remove foreign bodies from the tyre. Do not let the
compressor turned on for more than 20 consecutive minutes -
overheating hazard.
34) CHANGING A BULB
•Modifications or repairs to the electric system that are not
carried out properly or do not take the system technical
specifications into account can cause malfunctions leading to
the risk of fire.
•Halogen bulbs contain pressurised gas, in the case of
breakage they may burst causing glass fragments to be
projected outwards.
•Due to the high power supply voltage, gas discharge bulbs
(Xenon) should only be replaced by specialised personnel:
danger of death! Contact a Fiat Dealership.35) REPLACING FUSES
•If the replaced fuse blows again, contact a Fiat Dealership.
•Never replace a fuse with metal wires or anything else.
•Never replace a fuse with another with a higher amp rating; RISK
OF FIRE.
•If a general fuse (MEGA-FUSE, MIDI-FUSE,
MAXI-FUSE) blows contact a Fiat Dealership.
•Before replacing a fuse, make sure that the ignition key has
been removed and that all the other services are switched off
and/or disengaged.
•Contact Fiat Dealership if a safety system (airbags, brakes),
engine system
(engine, gearbox) or steering system general protection fuse
blows.
36) BATTERY RECHARGING
•Battery fluid is poisonous and corrosive:
avoid contact with your skin and eyes. The battery should be
charged in a well ventilated place, away from naked flames or
possible sources of sparks: danger of explosion and fire.
•Do not attempt to charge a frozen battery: it must be thawed
first, otherwise it may explode.
If freezing has occurred, the battery should be checked by skilled
personnel to make sure that the internal elements are not
damaged and that the body is not cracked, with the risk of leaking
poisonous and corrosive acid.
37) TOWING THE CAR
•Before tightening the ring clean the threaded housing thoroughly.
Make sure that the ring is fully fastened in the housing before
towing the car.
(CONTINUES)

203
•Never use alcohol, petrol, chemical products, detergents,
stain removers, wax, solvents and “wash and polish” products.
•Rinse immediate to remove soap to prevent stains. Repeat
the operation if needed.
•Rinse immediately, and repeat this operation if necessary.
If you choose to waterproof the soft top, strictly follow the
instructions on the package of the waterproofing product you
have selected in order to obtain optimal results.
•The rubber seals on the soft top must be cleaned exclusively
with water. If you notice that this trim is dry or is sticking, apply
talcum powder or products specifically for rubber trim (silicone
spray).
7) ROOF RACK/SKI RACK
The use of transversal bars on longitudinal ones prevents the
use of the sunroof, because the latter, while opening, interferes
with the bars. Therefore do not move the sunroof if transversal
bars have been fitted.
8) EOBD SYSTEM
If, when the ignition key is turned to the MAR position, the
Uwarning light either does not come on or, when driving, it
comes on constantly or flashing (along with a message in the
display, for versions/markets, where provided) contact a Fiat
Dealership as soon as possible. The operation of the
Uwarning light may be checked by traffic police using appropriate
equipment. Comply with the laws and regulations of the country
where you are driving.
9) DOORS
Make sure to take the key with you once a door or the tailgate
is locked, to prevent locking the same key inside the vehicle.
If the key has been locked in, it can only be recovered using
the second provided key.10) MULTIMEDIA
• Only clean the front panel and the display lens with a soft,
clean, dry, anti-static cloth.
Cleaning and polishing products may damage the surface. Never
use alcohol, petrols and derivatives.
• Do not use the display as a base for supports with suction pads
or adhesives for external navigators or smartphones or similar
devices
11) REFUELLING YOUR DIESEL ENGINE VEHICLE
Vehicles with a diesel engine must only be filled with diesel fuel for
motor vehicles, in compliance with European Standard EN 590.
The use of other products or mixtures may damage the engine
beyond repair and consequently invalidate the warranty, due to
the damage caused. If you accidentally introduce other types of
fuel into the tank, do not start the engine. Empty the tank. If the
engine has been run for even an extremely limited amount of time,
you must not only drain the fuel tank, but the rest of the supply
circuit as well.
12) SEAT BELTS - PRETENSIONERS
Operations which lead to impacts, vibrations or localised heating
(over 100°C for a maximum of six hours) in the area around the
pretensioner may damage or deploy it. Contact a Fiat Dealership
should intervention be necessary on these components.
13) STARTING AND STOPPING THE ENGINE
• It is advisable not to demand maximum performance from your
car (e.g. excessive accelerations, long distances at top rpm,
excessive intense braking, etc.) as soon as the engine is started.
• When the engine is switched off never leave the key turned to
MAR to prevent useless current absorption from draining the
battery.
VEHICLE SAFETY
(CONTINUES) (CONTINUED)