key FIAT 500 ABARTH 2012 2.G Blue And Me User Guide

In addition, you can use other calling features, such as
responding to incoming calls, re-dial, callback, call wait-
ing, reading a message or deleting it.
NOTE:
•If you encounter difficulties with any of the voice
recognition operations, refer to HANDS-FREE COM-
MUNICATION PACKAGE - TROUBLESHOOTING.
•Before you can make and receive phone calls using the
hands-free communication package, you must create a
pairing relationship for your mobile phone.
•For further information refer to SETTING FUNC-
TIONS – PAIRING A MOBILE PHONE.
•To activate the hands-free communication package,
the ignition key must be turned to the ON position.
•If during a phone call you turn the ignition key to
STOP, you can continue your conversation through the
hands-free communication package for another15 minutes. After 15 minutesBLUE&ME™will sound
a warning tone and will transfer the call to the mobile
phone.
Making a Phone Call
You can make a phone call using one of the following
methods:
•Calling a contact in your phonebook
•Dialing a phone number using voice commands
•Dialing a phone number using the mobile phone
keypad
•Calling a phone number using call history (recent
calls)
•Calling the sender of a received SMS message
NOTE:For further information refer to FUNCTIONS
OF SMS MESSAGES READER, paragraph SMS MES-
SAGES MANAGEMENT
32 BLUE&ME™ User’s Manual

Calling a contact in your phonebook
It is a requirement that you create a pairing relationship
and download your mobile phone phonebook to the
hands-free communication system to use this dialing
feature.
To call a contact in your phonebook using manual
interaction, proceed as follows:
Press the
/MAINbutton on the steering wheel to
open the Main Menu.
Use the Scan Up
and Scan Downbuttons on the
rear of the steering wheel to selectPHONEBOOKand
then pressPRESET UP/OKbutton on the rear of the
steering wheel.
To select the alphabetical grouping which your contact’s
name belongs to, press thePRESET UP/OKon the rear of
the steering wheel, then select the required contact.If the contact has just one phone number, press the
PRESET/OKbutton or the
/MAINon the steering
wheel to start the call.
If the contact has multiple phone numbers, use the scan
up and scan down buttons on the rear of the steering
wheel to view the different phone numbers and then
select the required one by pressing thePRESET UP/OK
button or the
/MAINbutton on the steering wheel to
start the call.
To end the phone call, press thePHONE HANG UP
button on the steering wheel.
Or, using voice interaction:
Assume you would like to call the contact “John Smith”
in your mobile phone phonebook.
Press and say“Call John Smith”or“Call John Smith
(on/at) Mobile”(in the previous statement, the keyword
“Mobile”represents the type of phone number you
1
BLUE&ME™ User’s Manual 33

“Delete”. The system will delete the last group of num-
bers and display the partially dialed phone number.
Then, you can say the digit group again and also the
remaining phone number digits.
To cancel the phone call, say“Cancel”.
To cancel the phone call and start dialing again, say
“Start over”.
To ask the system to repeat the recognized phone num-
ber, say“Repeat”. If no phone number was dialed, the
system says“No number available”.
If the repeated phone number is correct, say“Dial”to
start the call.
NOTE:When connected toBLUE&ME™and dialing a
phone number by voice commands, it is essential to
minimize background noise in the car and to ask the
other passengers to keep silent while you are speaking
the digits. Since the system is speaker independent, it canalso recognize other voices; there is a risk that some
numbers will be accidentally recognized, added to cor-
rect numbers or not recognized.
Dialing a phone number using the mobile phone
keypad
Alternatively, you can dial a phone number using your
mobile phone keypad and then continue your conversa-
tion using the hands-free communication system.
It is a requirement that you create a pairing relationship
and that the mobile phone is within range of the hands-
free communication system of your car.
To dial a phone number using your mobile phone key-
pad, proceed as follows:
•Dial the phone number on your mobile phone keypad
and connect the phone call following the procedure
required by your mobile phone.
36 BLUE&ME™ User’s Manual

•Conduct the conversation using the hands-free com-
munication system.
•To end the phone call, press thePHONE HANG UP
button on the steering wheel, or end the phone call
from your mobile phone keypad.
Calling a phone number using call history (recent
calls)
RECENT CALLSoption is a list of the recent calls made
or received. It can consist of up to ten incoming calls, up
to ten outgoing calls and up to five missed calls.
To dial a phone number using manual interaction, pro-
ceed as follows:
•Press the/MAINbutton on the steering wheel to
open the Main Menu.
•SelectRECENT CALLSand then press thePRESET
UP/OKbutton on the rear of the steering wheel.
•The system will present a list of phone numbers. Use
the Scan up/Scan down buttons to select the required
phone number. Then press thePRESET UP/OKbutton
on the rear of the steering wheel or the
/MAIN
button on the steering wheel to start the call.
•To end the phone call, press thePHONE HANG UP
button on the steering wheel.
Or, using voice interaction:
To call back the last incoming phone number, press the
steering wheel button and say“Call back”.
The system will display information about the last caller
and ask if you would like to call back this contact. To
respond with “yes”, say“Yes”,otherwise say“No”.
1
BLUE&ME™ User’s Manual 37

Answering an incoming phone call during an
active phone conversation
To answer an incoming phone call while another phone
conversation is active, press the
/MAINbutton on the
steering wheel. The system will switch to the incoming
phone call and put the current phone conversation on
hold.
NOTE:
•Not all mobile phones and carriers support this fea-
ture. Contact the FIAT Dealership or consult the
www.fiatusa.com website for compatible mobile
phones
•Certain mobile phones support the ability to transmit
your contact’s ring tones to the hands-free communi-
cation system and play customized ring tones for
incoming phone calls. In this case, the incoming phone
calls will have your mobile phone customized ring
tones. The ring tone format must be compatible with
the type of audio files thatBLUE&ME™supports.
Managing Phone Calls
Transferring a phone conversation from your
mobile phone to the hands-free communication
system
If you enter the car during a phone conversation from
your mobile phone and you want to continue the con-
versation using the car hands-free communication sys-
tem, you can transfer the phone conversation to it.
Proceed as follows:
•Get into the car and turn the ignition key to ON, to
activate the hands-free communication system.
•If the permissions on the phone are set to allow an
automatic connection the conversation will be trans-
ferred automatically. Otherwise the system will send a
message to your mobile phone offering hands-free
phone support.
1
BLUE&ME™ User’s Manual 39

NOTE:Before using the player, refer to COMPATIBLE
USB STORAGE DEVICES to check that your USB
memory device is compatible withBLUE&ME™.
How To Connect The USB Device/iPod To
BLUE&ME™ Hands-Free Communication
To connect your USB device/iPod toBLUE&ME™
Hands-Free Communication, proceed as follows:
•Copy tracks on your USB device/iPod (BLUE&ME™
recognizes.wma,.mp3 and.wav,.aac formats for audio
files and.wpl and.m3u for playlists).
•USB devices without USB wire: just connect the USB
device/iPod (directly or by an extension lead) to the
USB port on the car.
•USB devices with USB wire: use the wire to connect
the USB device/iPod to the USB port on the car.
The multimedia player does not play audio files covered
by digital rights (DRM).
•Turn the ignition key to ON. If theAUTOPLAYfeature
is set to ON,BLUE&ME™will start playback auto-
matically when a USB device is present in the USB
port.
•IfAUTOPLAYis set to ON,BLUE&ME™will start
playback automatically when a USB device is inserted
into the USB port
NOTE:
•For the best use ofBLUE&ME™it is recommended to
use USB devices with maximum capacity of 32 GB
•Indexing time will increase with the number of files
present on the media device. For a good customer
experience, a maximum total file size of 4 GB on the
media device is recommended.
•For further information refer to SETTINGS FUNC-
TION - MEDIA PLAYER.
•It is possible to useBLUE&ME™to select and play
tracks after the media library has been built.
46 BLUE&ME™ User’s Manual

Previous Track
To play the previous track using manual interaction,
proceed as follows:
While playing a digital track press the Scan Down
rear steering wheel button.
Or, using voice interaction:
While playing a digital track, press the
steering
wheel button and say“Previous”.
NOTE:If the“Previous”track (manual or voice) com-
mand is given after playing the first 3 seconds of the
track, the track will be started over. If it is given within
the first 3 seconds, the previous track will be played.
Changing audio sources
To change the current sound source (Radio, CD, CD
Changer, Media player), press thePRESET UP/OKbut-
ton on the rear of the steering wheel orFM, AM or
MEDIAbuttons on the radio.NOTE:For further details on voice commands (key-
words) to be used with the media player, refer to VOICE
COMMANDS (KEYWORDS) - SUMMARY.
iPodcompatibility
What I can do
•Listen to tracks in digital quality
•Select tracks by category (Artist, Album, Genre, etc.)
by voice control or using the controls on the steering
wheel
•Recharge the iPodvia USB
NOTE:
•The device must be in playback mode or paused to
start playing a track on some iPod/iPhone models.
•Load the tracks onto the iPod/iPhone device using
the procedure specified in the device manual.
•It is advisable to keep telephones and iPods updated
for optimal operation with theBLUE&ME™system.
54 BLUE&ME™ User’s Manual

the vehicle is moving, you can use voice commands only.
Instructions are provided for both methods.
NOTE:If you encounter difficulties with any of the
BLUE&ME™settings, refer to TROUBLESHOOTING.
Pairing a Mobile Phone
Before you can use your mobile phone with the hands-
free communication function on your car, you must
create a pairing relationship between the mobile phone
and the hands-free communication system.
During the pairing procedure, the hands-free communi-
cation system attempts to detect aBluetoothwireless
technology enabled mobile phone within range, and then
establishes the connection using a Personal Identification
Number (PIN). After a pairing relationship is established,
you can use the hands-free communication system to
make and receive phone calls, and do other operations
via your wirelessly-connected mobile phone.NOTE:Some mobile phones may require a setting
change or access permission change in order for
BLUE&ME™to automatically reconnect. See your mo-
bile phones manual for more information.
IMPORTANT!The mobile phone pairing PIN number is
a special PIN generated randomly at each new pairing
and used just for this operation. It is not your SIM PIN
and therefore it is not required to store or to keep it in
mind; losing it will not impair the hands-free communi-
cation system operation.
The pairing procedure will only need to be performed
once for your mobile phone. After this procedure
BLUE&ME™will automatically connect to your phone
each time you get into the car and turn the ignition key to
ON.
You can create a pairing relationship using thePAIRING
option in theSETTINGSmenu.
1
BLUE&ME™ User’s Manual 57

start copying the phonebook, press thePRESET UP/OK
button; otherwise press the
/ESCbutton. You can
download your phonebook at a later time using the
menu optionSETTINGS, USER DATA, or PHONE-
BOOK.
Or, using voice interaction:
Press the
button and say“Settings”,wait for the
tone then say“Pairing”.
The system shows the mobile phone pairing PIN on the
instrument panel display and repeats it.
For the next two steps, consult your mobile phone
owner ’s manual aboutBluetoothpairing.
On your mobile phone, query forBluetoothwireless
technology enabled mobile phones that are within range
(this option on your mobile phone might be called
Discover, New Device, etc.). View the list ofBluetoothwireless technology enabled mobile phones and select “
BLUE&ME™” (item that identifies the hands-free com-
munication package in your car).
When prompted by the mobile phone, enter the PIN
number shown on the instrument panel display using
your mobile phone keypad. If pairing is successful, the
system will say“Connecting”and then the display will
show the paired mobile phone ID.
It is of vital importance to wait until this confirmation
message is displayed, since pressing the
/MAINor
/ESCbuttons at this time may cancel the pairing
process. If pairing fails, an error message will be dis-
played and the pairing procedure needs to be repeated.
The first time a phone connect to the system, the system
will say“Welcome”immediately after connecting. This
message will no longer be heard the next time the phone
connects to the system.
1
BLUE&ME™ User’s Manual 59

The system will ask if you would like to copy your
phone’s phonebook. Copying is recommended. To start
copying the phonebook, say“Yes”;otherwise say“No”.
For certain mobile phones the phonebook is not copied
automatically, in this case you must send the contacts in
your mobile phone’s phonebook to theBLUE&ME™
hands-free communication system using your mobile
phone keypad.
Practical hints
To improve both the voice recognition of your phone-
book entries andBLUE&ME™pronunciation accuracy
when repeating the entries, please try to enter contact
entries and memorize them using the following criteria:
•Avoid abbreviations.
•Write foreign names according to the way in which
they are pronounced according to the rules of the
BLUE&ME™language set on your car. For example,enter “Tanja” as “Tanya”, to improve recognition ac-
curacy and also to obtain the correct pronunciation by
the system.
•When adding or editing contact entries, insert the
appropriate accent marks when the name requires
these marks to be properly pronounced and recog-
nized by the system. For example enter “Nicolo Re-
bora” as “Nicolò Rébora” to obtain the correct pronun-
ciation.
•When adding or editing contact entries, bear in mind
that certain capital letters may be read as Roman
numerals (e.g., V may be read as fifth).
•When calling contacts by voice, do not include the
middle names or middle initials of your contacts.
60 BLUE&ME™ User’s Manual