bluetooth FIAT 500 ABARTH 2012 2.G Blue And Me Owner's Manual

Mobile phones with message reader (not all
mobile phones support reading incoming SMS
messages)
If your mobile phone can send messages through the
Bluetoothwireless technology, it is possible to read
incoming messages using theBLUE&ME™Hands-Free
Communication Package, to store them in the dedicated
inbox or to delete them.
Supported USB Memory Devices
USB Memory Devices
The media player supports most USB memory devices.
1.0, 1.1 or 2.0.
NOTE:It is not possible to use USB devices equipped
with a “password” function.
Supported digital audio files
The media player supports audio files with the following
formats:
Extension Audio Coding
.wma Windows Media Audio Decode
(Format Tag: WMA2 = 353,
WMA1=352) Decodes all CBR pro-
files from 5kbps to 192kbps, 8kHz
to 48kHz, mono and stereo De-
codes all v9 CBR profiles, from
5kbps to 320kbps, 8kHz to 48kHz,
mono and stereo Decodes all qual-
ity based, bit rate based and peak
constrained VBR profiles Supports
WMA v1 and WMA v2 bit streams
70 BLUE&ME™ User’s Manual

Problem Probable Cause Possible Solution
Display screen shows:
NO PHONE
And the system says
“No Bluetooth telephone
is connected.”•The paired mobile phone is turned off
•The paired mobile phone is not within
range of the system (the mobile phone
should be located within approximately
30 feet of the system)
•Bluetoothwireless technology connec-
tion has been disabled on your mobile
phone•Turn the paired mobile phone on
•Make sure that your phone is paired
•Make sure that theBluetoothwireless
technology connection on your mobile
phone is enabled
•Make sure that the mobile phone you
paired with the system is within range
Problem Probable Cause Possible Solution
Display screen shows:
DISCONNECTED.•A technical error occurred with the mo-
bile phoneBluetoothwireless technol-
ogy capabilities
•During an ongoing phone conversation,
the mobile phone was taken out of the
system range•ResetBLUE&ME™by turning the mo-
bile phone off and on
•ResetBLUE&ME™by turning the igni-
tion key to OFF and then to ON again
1
BLUE&ME™ User’s Manual 85

Problem Probable Cause Possible Solution
•If you don’t press the
button be-
fore pronouncing a voice command, the
system will not activate voice recogni-
tion and therefore will not recognize
your voice commands
•If you don’t press the
/MAINbut-
ton to enter the Main Menu, it will not
be possible to manually access the
BLUE&ME™menu
•If after pressing the
/MAINbutton,
you don’t take action within approxi-
mately eight seconds, the system will
not respond to your key press
The mobile phone
prompts you to enter a
PIN number, but no
phone pairing proce-
dure was running•After you delete the pairing-related user
information on your mobile phone or
on the system, theBluetoothpairing
relationship between your mobile phone
andBLUE&ME™will no longer work•
Select option DELETE USERS on the system
and delete all users; then, pair the phone
again – see the section SETTING FUNCTIONS
- MANAGING USER DATA AND PHONE-
BOOK and also the section SETTING FUNC-
TIONS - PAIRING YOUR MOBILE PHONE
88 BLUE&ME™ User’s Manual

PERSONAL DATA PROTECTION
BLUE&ME™Hands-Free Communication functions en-
tail personal data handling. In order to protect and to
prevent non-authorized access to personal data,
BLUE&ME™has been implemented with the following
criteria:
•Personal data connected to hands-free communication
functions (phonebook and last calls) can only be
accessed after automatic recognition of your
Bluetoothwireless technology enabled mobile
phone;
•Stored personal data can be deleted using specific
BLUE&ME™functions.
NOTE:For further details on how to delete personal
data, refer to SETTINGS FUNCTION - MANAGING
USER DATA.
CAUTION!
Take into account that when leaving your car at a
service center, personal data stored on BLUE&ME™
(phonebook and last calls) may be disclosed or may
be subject to improper use. Before leaving your car at
the service center you can delete stored data and
phonebook from BLUE&ME™.
NOTE:For further details on how to delete personal
data and phonebook, refer to SETTINGS FUNCTION -
MANAGING USER DATA
SYSTEM SOFTWARE USE NOTICE
This system contains software that is licensed to Manu-
facturer pursuant to a license agreement. Any removal,
reproduction, reverse engineering or other unauthorized
use of the software from this system in violation of the
license agreement is strictly prohibited and may subject
you to legal action.
1
BLUE&ME™ User’s Manual 101