differential FIAT 600 2007 1.G Owners Manual
Page 127 of 146
Modifications or repairs
to the fuel feed system
that are not carried out
properly or do not take the sys-
tem’s technical specifications
into account can cause malfunc-
tions leading to the risk of fire. FUEL SUPPLY IGNITION
Integrated multipoint electronic in-
jection and ignition system: a single
control units controls both function
processing injection time (for fuel me-
tering) and spark advance angle at the
same time.
SPARK PLUGS
The cleanness and soundness of the
spark plugs are very important for
keeping the engine efficient and pol-
luting emissions down.
The appearance of the spark plug, if
examined by an expert eyes, is a good
way of pinpointing a problem even if
it has nothing to do with the ignition
system. Therefore, if the engine has
problems, it is important to have the
spark plugs checked at a Fiat Deal-
ership.
TRANSMISSION
CLUTCH
Mechanically controlled without
travel-free pedal.
GEARBOX
Five forward gears and reverse with
synchromesh for front gear engage-
ment.
Cyclical gear reduction and differen-
tial assembly incorporated in the gear-
box.
Drive transmission to the front
wheels by means of drive shafts con-
nected to the differential assembly and
the wheels with CV joints. The spark plugs must be
changed at the times
specified in the
SERVICE
SCHEDULE
. Only use the type of
plugs indicated. If the heat ratio
is less than required or the life
specified is not guaranteed, prob-
lems can arise.
126TECHNICAL SPECIFICATIONS
124-136 Seicento GB 22-11-2007 10:51 Pagina 126
Page 134 of 146
133TECHNICAL SPECIFICATIONS
CAPACITIES
Fuel tank:
including a reserve about:
Engine cooling system:
Engine sump:
Engine sump and filter:
Gearbox/differential casing:
CV joint cavities and boots
(each):
Front and rear brakes hydraulic circuit:
Windscreen and rear window
washer liquid reservoir: Prescribed fuel
Recommended products
Unleaded petrol with no less
than 95 R.O.N.
Mixture of distilled water and
PARAFLU UPat 50% (❑)
SELENIA 20 K
TUTELA CAR TECHNYX
TUTELA ALL STAR
TUTELA TOP 4
Mixture of water and TUTELA
PROFESSIONAL SC35fluid litres kg
38 –
7–
4–
3.1 2.8
3.5 3.1
2.4 2.15
– 0.08
0.4 –
1.8 –
(❑) For particularly hard climate conditions, we recommend use of a 60% PARAFLU UP and 40% demineralized water mixture.
124-136 Seicento GB 22-11-2007 10:51 Pagina 133
Page 136 of 146
135TECHNICAL SPECIFICATIONS
UseOriginal fluids
and lubricants
TETELA CAR
TECHNYX
Contractual Technical
Reference N.° F010.B05
TUTELA ALL STAR
Contractual Technical
Reference N.° F702.G07
TUTELA TOP 4
Contractual Technical
Reference N.° F001.A93
PARAFLU UP
Contractual Technical
Reference N.° F101.M01
TUTELA
PROFESSIONAL
SC 35
Contractual Technical
Reference N.° F201.D02 Fluid and lubricant specifications
for correct car operation
Lubricant with synthetic basis complying with SAE 75W-85.
Performance exceeds by far the API GL-4 PLUS
and FIAT 9.55550 standards required.
Grease containing Molybdenum bisulphide for high
temperature appliances. NLGI 1-2 consistency.
Synthetic fluid, F.M.V.S.S. no. 116, DOT 4, ISO 4925,
SAE J-1704, CUNA NC 956-01
Anti-freezing safety liquid (red colour) containing
monoethylene glycol inhibited with organic formula.
Antifreeze complying with CUNA NC 956-16, ASTM D
3306 standards.
Mixture of alcohols, water and surfactants
(CUNA NC 956-11).Change
Mechanical gear and
differential gear.
Constant-velocity
joints on wheel side.
Hydraulic brakes
and clutch hydraulic
controls.
Radiator antifreeze
proportion:
50% water and 50%
PARAFLU UP (
❒)
To be used diluted
or undiluted in
windscreen/rear
window washer/
wiper systems
IMPORTANTDo not top up or mix with fluids having characteristics different from those specified.
(
❒) For particularly hard climate conditions, we recommend use of a 60% PARAFLU UP and 40% demineralized water mixture.
Lubricants and greases
for transmission
Brake fluids
Protective agent
for radiatore
Windscreen/
rear window
washer fluid
124-136 Seicento GB 22-11-2007 10:51 Pagina 135