technical specifications FIAT FULLBACK 2016 1.G Owner's Manual

Nr. Item Quantity Lubricants
2Brake fluid
(Includes 0.23 litre in the reserve tank)0.56 litresTUTELA TOP 4/SContractual Technical
Reference N° F001.A93
Clutch fluid
(1)As requiredTUTELA TOP 4/SContractual Technical
Reference N° F001.A93
6 Power steering fluid As requiredTUTELA GI/ZContractual Technical
Reference N°F001.A16
4Engine Oil
Oil pan2WD 6.5 litres
SELENIA MULTIPOWER C3Contractual
Technical Reference N° F129.F11 2WD Hi-Rider, 4WD 5.5 litres
Engine Oil Oil filter 0.8 litres
Engine Oil Oil cooler 0.1 litres
7 Washer fluid 4.2 litres
Manual Transmission oil 2WD
(1)
5 M/T With Intercooler 2.3 litresTUTELA TRANSMISSION GEARSYNTH
Z3Contractual Technical Reference
N°F001.A16 5 M/T Without Intercooler 2.3 litres
6 M/T 2.2 litresTUTELA TRANSMISSION GEARSYNTH
Z4Contractual Technical Reference
N°F002.A16
Manual Transmission oil 4WD
(1)
5 M/T With Intercooler 3.4 litresTUTELA TRANSMISSION GEARSYNTH
Z3Contractual Technical Reference
N°F001.A16 5 M/T Without Intercooler 2.2 litres
6 M/T 2.2 litresTUTELA TRANSMISSION GEARSYNTH
Z4Contractual Technical Reference
N°F002.A16
(1) If so equipped
296
TECHNICAL SPECIFICATIONS

Petrol-powered vehicles
A— RHD vehicles
No. Items Quantity Lubricants
1Engine coolant
(Includes 0.65 litre in the reserve tank)7.5 litresPARAFLU UPContractual Technical
Reference N° F101.M01
2Brake fluid
(Includes 0.23 litre in the reserve tank)0.56 litresTUTELA TOP 4/SContractual Technical
Reference N° F001.A93
3 Clutch fluid As requiredTUTELA TOP 4/SContractual Technical
Reference N° F001.A93
1
623
784
5
A
23
426VANOBENZINA24
298
TECHNICAL SPECIFICATIONS

FLUIDS AND LUBRICANTS
Product specifications
Your vehicle is equipped with an engine oil that has been thoroughly developed and tested in order to meet the requirements of
the Scheduled Servicing Plan.
Constant use of the prescribed lubricants guarantees the fuel consumption and emission specifications. Lubricant quality is
crucial for engine operation and duration.
Lubricant Characteristics SpecificationOriginal Fluids and
LubricantsReplacement interval
Engine oil
With DPF
Without DPFSAE 5W-30
ACEA C39.55535-S3
or MS-11106SELENIA MULTIPOWER C3
Contractual Technical
Reference N° F129.F11According to Scheduled
Servicing Plan
If lubricants compliant with the required specifications are not available, products that comply with the minimum required
characteristics can be used for topping up; in this case optimal performance of the engine is not guaranteed.
192)
300
TECHNICAL SPECIFICATIONS
IMPORTANT
192)The use of products with specifications different than those indicated above could cause damage to the engine that is not covered by
the warranty.

Lubricant Characteristics SpecificationOriginal Fluids and
LubricantsApplications
Protective agent for
radiatorsCUNA NC 956-16
ASTM D 33069.55523
or MS.90032PARAFLU UP
Contractual Technical
Reference N° F101.M01
(1)Engine Coolant
(1) The product used for initial filling and PARAFLU UP can be fully mixed, even though the colours may differ. PARAFLU UP may be used for topping up amounts of
up to 1 litre. Over this amount we recommend completely changing the coolant in the percentages given.
302
TECHNICAL SPECIFICATIONS
Brake fluid
Clutch fluidDOT 49.55597
or MS.90039TUTELA TOP 4/S
Contractual Technical
Reference N° F001.A93Hydraulic brakes and
hydraulic clutch controls
Power Steering Synthetic lubricant ATF 9.55550-AG 4TUTELA GI/Z
Contractual Technical
Reference N°F001.A16