FIAT PUNTO 2018 Owner handbook (in English)
Page 201 of 219
5 doors5 seats
1030
560
850
850
1590
900
40050
60
3 doors5 seats
1025
560
850
850
1585
1000 400
50
60
5 doors5 seats
1040
560
850
850
1600
1000 400
50
60
197
SAFETY
STARTING 
AND DRIVING
WARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
SERVICE 
AND CARE
INDEX
CONTROLS 
AND DEVICES
TECHNICAL
SPECIFICATIONS
WEIGHTS
1.2 1.4 
Weights (kg)
Unladen weight (with all fluids, 
fuel tank filled to 90% and 
without optional equipment):
Payload (*) including the driver:
Maximum permitted loads (**)
– front axle:
– rear axle:
– total: 
Towable loads:
– braked trailer:
– non-braked trailer:
Maximum load on roof:
Maximum load on the 
ball joint (braked trailer):
(*) If special equipment is fitted (sunroof, tow hitch, etc.) the unladen \
car weight increases, thus reducing the specified payload with  respect to the maximum permitted load.
(**) Loads that must not be exceeded. The driver is responsible for arranging\
 the goods in the boot and/or on the load carrying  platform 
within the maximum permitted loads.
3 doors 5 seats
1015
560
850
850
1575
900
40050
60
185-206 PUNTO POP 1ed EN  24/03/14  13:52  Pagina 197 
Page 202 of 219
198
SAFETY
STARTING 
AND DRIVING
WARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
SERVICE 
AND CARE
INDEX
CONTROLS 
AND DEVICES
TECHNICAL
SPECIFICATIONS
3 doors 5 seats
1090
560
950
850
1650
1000 400
50
60
5 doors5 seats
1105
560
950
850
1665
1000 400
50
60
3 doors5 seats
1130
560
950
850
1690
1000 400
50
60
5 doors5 seats
1145
560
950
850
1705
1000 400
50
60
1.3 Multijet 75HP 1.3 Multijet 85HP 
Weights (kg)
Unladen weight (with all fluids, 
fuel tank filled to 90% and 
without optional equipment):
Payload (*) including the driver:
Maximum permitted loads (**)
– front axle:
– rear axle:
– total: 
Towable loads:
– braked trailer:
– non-braked trailer:
Maximum load on roof:
Maximum load on the 
ball joint (braked trailer):
(*) If special equipment is fitted (sunroof, tow hitch, etc.) the unladen \
car weight increases, thus reducing the specified payload with  respect to the maximum permitted load.
(**) Loads that must not be exceeded. The driver is responsible for arranging\
 the goods in the boot and/or on the load carrying  platform 
within the maximum permitted loads.
185-206 PUNTO POP 1ed EN  24/03/14  13:52  Pagina 198 
Page 203 of 219
1.3 Multijet85HP
–
–
45
5 ÷ 7
6.7 –
–
3.0
3.2
1.7 (
■)
0.5
2.2
4.5
1.4
45
5 ÷ 7
–
–
5.3
2.4
2.6 –
–
1.5 (
●)
0.5
2.2
4.5
1.2
45
5 ÷ 7
–
–
5.3
2.4
2.6 –
–
1.5 (
●)
0.5
2.2
4.5
CAPACITIES
Fuel tank:  litres 
including a reserve of: litres
Fuel tank: litresincluding a reserve of: litres
Engine cooling 
system: litres
Engine sump: litres
Engine sump and filter: litres
Engine sump: litres
Engine sump and filter: litres 
Gearbox/differential
casing: kg
Hydraulic brake circuit: kg
Windscreen/rear window 
washer fluid reservoir: litres 
with headlight washers:  litres
( ❒ ) For particularly harsh climate conditions, a mixture of 60%  PARAFLUUPand 40% distilled water is recommended.
(
▲) Per condizioni climatiche particolarmente rigide, si consiglia l’util\
izzo di TUTELA TRANSMISSION GEARFORCE.
(*) Euro 4
(**) Euro 5 - Euro 5+
Recommended fuels 
and original lubricants
Unleaded petrol with no less 
than 95 R.O.N. 
(EN228 Specification)
Diesel for motor vehicles 
(EN590 Specification)
50-50 mixture of water and 
PARAFLU
UPliquid (❒)
SELENIA K P.E.
SELENIA WR P.E.
TUTELA 
CAR TECHNYX (
●) (▲)
TUTELA TRANSMISSION
GEARFORCE(■)
TUTELA TOP 4
Mixture of water and 
TUTELA 
PROFESSIONAL SC35
199
SAFETY
STARTING 
AND DRIVING
WARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
SERVICE 
AND CARE
INDEX
CONTROLS 
AND DEVICES
TECHNICAL
SPECIFICATIONS
1.3 Multijet
75HP
–
–
45
5 ÷ 7
7,4 *
6,7 **
–
–
3.0
3.2
1.7 (
●)
0.5
2.2
4.5
185-206 PUNTO POP 1ed EN  24/03/14  13:52  Pagina 199 
Page 204 of 219
200
SAFETY
STARTING 
AND DRIVING
WARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
SERVICE 
AND CARE
INDEX
CONTROLS 
AND DEVICES
TECHNICAL
SPECIFICATIONS
FLUIDS AND LUBRICANTS
Your car is equipped with an engine oil that has been thoroughly develop\
ed and tested in order to meet the requirements of the
Scheduled Servicing Plan. Constant use of the prescribed lubricants guar\
antees the fuel consumption and emission specifications .
Lubricant quality is crucial for engine operation and duration.
SPECIFICATIONS AND RECOMMENDED PRODUCTS
Use Quality specifications of fluids and lubricants Original Replacement
for correct car operation fluids and lubricants interval
Lubricants for 
petrol engines
Lubricants for 
diesel engines
In case of emergency, if lubricants with the prescribed specifications a\
re not available, products with the minimum indicated A CEA
performance can be used for topping up; in this case optimal performance\
 of the engine is not guaranteed. SAE 5W-40 ACEA C3
grade synthetic base lubricant.
FIAT 9.55535-S2 certification.
SAE 5W-30 
grade synthetic base lubricant. 
FIAT 9.55535-S1 certification.
SELENIA K P.E. 
Contractual Technical
Reference 
N° F603.C07
SELENIA WR P.E. 
Contractual Technical
Reference 
N° F510.D07As per 
the Scheduled 
Servicing Plan
As per 
the Scheduled 
Servicing Plan
The use of products with specifications other than those indicated above\
 could cause damage
to the engine not covered by the warranty.
185-206 PUNTO POP 1ed EN  24/03/14  13:52  Pagina 200 
Page 205 of 219
201
SAFETY
STARTING 
AND DRIVING
WARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
SERVICE 
AND CARE
INDEX
CONTROLS 
AND DEVICES
TECHNICAL
SPECIFICATIONS
Brake liquid 
Fuel additive
Use Quality specifications of fluids and lubricants OriginalApplicationsfor correct car operation fluids and lubricants
(*) IMPORTANT Do not use fluids with different specifications for topping up\
 or mixing.
(❒ ) When the vehicle is used in particularly harsh climate conditions, we re\
commend using a 60-40 mixture of  PARAFLU
UPand distalled water.
Windscreen/rear 
window washer
fluid Mechanical gearbox and
differential (petrol and
1.3 Multijet 75HP versions)
Mechanical gearbox and
differential (1.3 Multijet
85HP versions)
Wheel side 
constant-velocity joints
Differential side 
constant-velocity joints
Hydraulic brakes 
and hydraulic clutch con-
trols
Cooling circuit. 
Mixture: 50% water and
50% 
PARAFLU
UP(❒ )
Mix 25cc per 10 litres of
diesel
To be used diluted or
undiluted in windscreen/
rear window washer/
wiper systems
TUTELA CAR TECHNYX
Contractual Technical 
Reference N° F010.B05
TUTELA TRANSMISSION 
GEARFORCE
Contractual Technical 
Reference N° F702.G07
TUTELA ALL STAR 
Contractual Technical 
Reference N° F702.G07
TUTELA STAR 700
Contractual Technical 
Reference N° F701.C07
TUTELA TOP 4
Contractual Technical 
Reference N° F001.A93
PARAFLU
UP(*)
Contractual Technical 
Reference N° F101.M01
TUTELA DIESEL ART
Contractual Technical 
Reference N° F601.L06
TUTELA 
PROFESSIONAL SC35
Contractual Technical 
Reference N° F201.D02
Lubricants 
and greases 
for drive 
transmission 
system
Radiator 
protection 
SAE 75W-85 grade synthetic base lubricant. 
FIAT 9.55550-MX3 certification
SAE 75W grade synthetic base lubricant.
FIAT 9.55550-MZ6 certification
Molybdenum disulphide grease, for use at 
high temperatures. 
FIAT 9.55580 certification
. NL.GI. 1-2 consistency 
Grease for constant-velocity joints with low 
friction coefficient. 
FIAT 9.55580 certification . NL.GI. 0-2 consistency
Synthetic fluid FMVSS n° 116 DOT 4, ISO 4925 
SAE J1704, CUNA NC 956- 01. 
FIAT 9.55597 certification
Inhibited mono ethylene glycol-based antifreeze 
protection, red, with organic formulation. 
Passes CUNA NC 956-16, ASTM D 3306 specifications. 
FIAT 9.55523 certification
Additive for diesel antifreeze, protecting 
diesel engines
Mixture of alcohol, water and surfactants 
CUNA NC 956-II
FIAT 9.55522 certification .
185-206 PUNTO POP 1ed EN  24/03/14  13:52  Pagina 201 
Page 206 of 219
202
SAFETY
STARTING 
AND DRIVING
WARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
SERVICE 
AND CARE
INDEX
CONTROLS 
AND DEVICES
TECHNICAL
SPECIFICATIONS
❒extra-urban cycle: driving that simulates using the vehicle out of town with fre-
quent acceleration in all gears; the
speed varies from 0 to 120 km/h;
❒combined consumption: this is calcu-lated with a weighting of about 37% ur-
ban cycle consumption and about 63%
extra-urban consumption.
The fuel consumption figures given in the
table below are determined on the basis
of the homologation tests set down by
specific European Directives.
The procedures below are followed for
measuring consumption:
❒urban cycle: cold starting followed by
driving that simulates urban use of the
car; IMPORTANT The type of route, traffic
situations, weather conditions, driving
style, general state of the car, trim lev-
el/equipment/accessories, load, climate
control system, roof rack, and other sit-
uations that affect how the car moves
through the air may lead to different fuel
consumption levels than those measured.
Fuel consumption according to the current European directive (litres / \
100 km)
Versions UrbanExtra-urban Combined
1.2 (Euro 4) 7,3 4,8 5,7
1.2 (Euro 5 - Euro 6)7,2 4,4 5,4
1.4 (Euro 4)7,5 5,0 5,9
1.4 (Euro 5 - Euro6)7,4 4,7 5,7
1.3 Multijet 75HP (Euro 4)6,2 3,5 4,5
1.3 Multijet 75HP (Euro 5 - Euro5+)5,5 3,5 4,2
1.3 Multijet 85HP (Euro 5+)4,4 2,9 3,5
FUEL CONSUMPTION
185-206 PUNTO POP 1ed EN  24/03/14  13:52  Pagina 202 
Page 207 of 219
203
SAFETY
STARTING 
AND DRIVING
WARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
SERVICE 
AND CARE
INDEX
CONTROLS 
AND DEVICES
TECHNICAL
SPECIFICATIONS
CO2EMISSIONS
The CO2emission figures in the table below refer to combined fuel consumption.
Versions CO2Emissions
according to the current European directive (g/km)
1.2 (Euro 4) 135
1.2 (Euro 5 - Euro6)126
1.4 (Euro 4)139
1.4 (Euro 5 - Euro 6)132
1.3 Multijet 75HP (Euro 4)119
1.3 Multijet 75HP (Euro 5 - Euro 5+)112
1.3 Multijet 85HP (Euro 5+) 90
185-206 PUNTO POP 1ed EN  24/03/14  13:52  Pagina 203 
Page 208 of 219
204
SAFETY
STARTING 
AND DRIVING
WARNING
LIGHTS AND MESSAGES
IN AN
EMERGENCY
SERVICE 
AND CARE
INDEX
CONTROLS 
AND DEVICES
TECHNICAL
SPECIFICATIONS
ARRANGEMENTS FOR DEALING WITH THE VEHICLE AT THE END OF ITS LIFE
Fiat has been committed for many years to safeguarding the environment t\
hrough the constant improvement of its production
processes and manufacturing products that are increasingly “eco-compa\
tible”. To give customers the best possible service in ter ms
of respecting environmental laws and in response to European Directive 2\
000/53/EC governing vehicles at the end of their life, 
Fiat is offering its customers the opportunity of handing over their veh\
icle* at the end of its life without incurring any additional costs.
The European Directive sets out that when the vehicle is handed over the\
 last keeper or owner should not incur any expenses as
a result of it having a zero or negative market value.  In all European \
Union countries, until 1st January 2007, only vehicles  regis-
tered after 1st July 2002 were collected free of charge, while since 200\
7 collection has been free of charge irrespective of the year
of registration as long as the vehicle contains its basic components (i\
n particular, the engine and bodywork) and has no additi onal
waste.
To hand your vehicle over at the end of its life without extra cost, go \
to one of our Dealerships or Fiat-authorised collection and
scrapping centres. These centres have been carefully chosen to offer hig\
h quality service for the collection, treatment and rec ycling
of unused vehicles with respect to the environment.
You can find further information on these collection and scrapping centr\
es either from a Fiat or Fiat Commercial Vehicle Dealer -
ship or by calling the freephone number 00800 3428 0000 or by going on t\
he Fiat website.
(*) Vehicle for transporting passengers with a maximum of nine seats a\
nd a total permitted weight of 3.5 t
185-206 PUNTO POP 1ed EN  24/03/14  13:52  Pagina 204 
Page 209 of 219
185-206 PUNTO POP 1ed EN 24/03/14 13:52 Pagina 205
Page 210 of 219
185-206 PUNTO POP 1ed EN 24/03/14 13:52 Pagina 206