engine FORD FOCUS 2016 3.G Quick Reference Guide

INSTRUMENT PANEL
12
4
3
6
9
5
8
4 • 5*if equipped
*if equipped
7
10
1 Luggage Compartment*/
Liftgate* Release
2 Cruise Control*
To Set Your Cruise Control Speed
A. Press and release the ON control.
B. Drive to the desired speed.
C. Press and release the SET + control,
then take your foot off the accelerator. After you set your speed, you can press
SET + or SET – to adjust your cruise
speed. To disable, tap the brake,
press the clutch pedal or press the
CAN
(Cancel) control.
Note: Using the clutch pedal to cancel a
set speed may cause the engine speed
to increase briefly.

3 Service Engine Soon Light
Lights briefly when you switch the ignition on. If it
remains on or blinks after you start the engine, the On-Board
Diagnostics (OBD-II) system detects a problem. Drive in a
moderate fashion and contact your authorized dealer as
soon as possible.
4 Information Displays
Provides information about various systems on your vehicle.
Use the left, 5-way controls, located on the steering wheel,
to choose and confirm settings and messages. Refer to the
Information Displays chapter of your Owner’s Manual for
more information.
5 Wiper Controls
6 Steering Wheel Controls*
Use the right-hand, 5-way controls to adjust the
following features:
Press VOL + or – to increase or decrease volume levels.
Press
to access the previous or next radio station, CD
or MP3 track or preset satellite radio channel.*
Press
to access voice recognition.
Press
to answer a call.
Press
to exit phone mode or end a call.
7 Push Button Switch*
Allows you to start your vehicle by pressing the START STOP
control while fully pressing down on the brake (automatic
transmission) or clutch (manual transmission) pedal. Press
the control again to switch the engine off. Note: Your intelligent access transmitter must be inside the
vehicle for keyless starting to work.
8 Tilt/Telescope Steering Column
Unlock the steering wheel by pulling the lever down. Adjust
the wheel to the desired position. Push the lever back up to
lock the steering wheel in place.
9 Hazard Warning Flashers
10 Auto-Start-Stop*
The system reduces fuel consumption and CO2 emissions
by shutting down the engine when you idle your vehicle, for
example at traffic lights. When you switch the ignition on,
the system automatically turns on.
To switch the system off, press the
switch and the word
OFF illuminates. Press again to switch the system back
on. The system only switches off for the current ignition
cycle. See the Unique Driving Characteristics chapter in
your Owner’s Manual for complete details.

*if equipped10 • 11*if equipped
Remote Start*
Remote start allows you to start the
engine from outside your vehicle using
your transmitter.
To Start
1. Press
and then press twice
within three seconds.
2. Once inside, press the brake while
pressing the START STOP button.
SYNC® 3* CONTINUED CONVENIENCE
Settings
Touch the Settings icon to customize information within
your vehicle. Adjust the clock, display, some vehicle
features and sound settings.
Apps
Stream Apps
The system supports the use of certain audio apps
such as Pandora
® or iHeartRadio® through a USB or
Bluetooth-enabled devices.
Each app gives you different on-screen options depending
on the app’s content.
For more information, refer to the SYNC Supplement.
For support, visit the website or call the toll-free number.
See the inside front cover of this guide for details.
Audio
No matter how you store your music, SYNC makes it
yours to enjoy when you’re behind the wheel. Press the
audio icon on the touchscreen. From here, you can easily
go between AM, FM, SiriusXM and other media sources.
Bring in Your Own Music
Use SYNC to play all of your favorite music from phones,
flash drives and other devices.
Plug your device into a USB port, select Sources and then
choose USB. Wait for the system to finish indexing your
music to begin listening.
For additional support, refer to your SYNC Supplement,
visit the website or call the toll-free number. See the
inside front cover of this guide for details.
Intelligent Access*
Note: Your intelligent access transmitter must
be within 3 ft (1 m) of your vehicle.
To unlock a front door: Pull the front exterior
door handle.
To lock all of the doors: Press and hold the door
handle lock sensor.
To unlock and open the luggage compartment* or
liftgate *: Press the exterior release button near the
license plate.
The intelligent access transmitter also contains a mechanical key
blade, that you can use to unlock the driver door, if necessary.
MyKey®
Allows you to program speed
restrictions and limited volume
levels, force on safety belt reminders
and more. For complete information,
refer to the MyKey chapter in your
Owner’s Manual.

14 • 15*if equipped
COMFORT
Ambient Lighting*
The ambient lighting system lights the interior with a choice of several colors.
The ambient lighting control is in the overhead console. Rotate the control knob to
switch the feature on and adjust the desired brightness. Press the palette button
to cycle through your color choices.
Ambient lighting switches on when:
• Y ou switch the ignition on.
• Y ou switch the headlamps on.
Traction Control
The traction control system helps avoid
drive wheel spin and loss of traction.
If your vehicle begins to slide, the
system applies the brakes to individual
wheels and, when needed, reduces
engine power at the same time. If the
wheels spin when accelerating on
slippery or loose surfaces, the system
reduces engine power in order to
increase traction.
In certain situations (for example,
stuck in snow or mud), turning the
traction control off may be beneficial
as this allows the wheels to spin with
full engine power. You can switch this
feature off in the information display, or
via a switch on the instrument panel.*
FUNCTION CONTINUED
Interior Lamps
The lamps turn on when you
open any door, press a remote
control button or press the
overhead control.
Press
to switch off the door
illumination function when you
open any door.
Press
again to switch the door
illumination function back on.
Press
to switch the overhead
lamps on and off.
AdvanceTrac® Stability
Control System
The system helps you keep control
of your vehicle when on a slippery
surface. The electronic stability
control portion of the system helps
avoid skids and lateral slides, while
the traction control system helps
avoid drive wheel spin and loss
of traction.
*if equipped
Tilting Head Restraints*
You can adjust your vehicle’s
front-row head restraints.
To raise: Pull up on the
head restraint.
To lower: Press the head
restraint down while pressing
and holding the guide sleeve
adjust and release button.
To tilt the head restraint: Gently pull the top of the
head restraint forward.
To return it to its upright position: Tilt it forward once
more and release.
Note: Do not attempt to force the head restraint
backward after tilting it. Instead, continue tilting it forward
until the head restraint releases to the upright position.
Front-Seat Adjusters
Height/Recline Adjustment
Adjust the height
of the driver seat by
lifting the lever.
Adjust the angle
of the seatback by
lifting the control.
Heated front Seats*
Press the heated front seat
control on the instrument
panel to cycle through the various heat settings and off.
More indicator lights mean warmer settings.
Dual Zone Temperature Control*
You can operate the temperature with one control, called
single zone, or two, called dual zone where both driver and
front passenger can select independent temperatures using
their own rotary dials.
To operate the dual zone: Use the rotary control on the
passenger’s side. Single zone automatically shuts off.
You can now adjust the driver’s side and passenger’s side
temperatures independently.
To return back to single zone: Press and hold the AUTO
button for 2–4 seconds. The passenger’s temperature
switches to the driver’s temperature setting.