ECU FORD RANGER 1997 2.G User Guide

Seating and Safety Restraints
133
*
[SS15025(R)03/96]
RWARNING
Do not leave children, unreliable adults, or pets
unattended in your vehicle.
%*
[SS15900(R)01/96]
Safety Seats for Children
*
[SS16000(R)01/96]
Use a safety seat that is recommended for the size and weight
of the child. Always follow the safety seat manufacturer's
instructions when installing and using the safety seat.
*
[SS16015(R)01/96]
Ford recommends the use of a child safety seat having a top
tether strap. Install the child safety seat in a seating position
which is capable of providing a tether anchorage. For more
information on top tether straps seeAttaching Safety Seats With
Tether Strapsin this chapter.
*
[SS16025(R)05/96]
When installing a child safety seat, be sure to use the correct
safety belt buckle for that seating position, and make sure the
tongue is securely fastened in the buckle. For a shoulder/lap
belt combination with a sliding tongue, make sure the retractor
is in the automatic locking mode.
*
[SS16090(R)05/96]
All child restraint systems are designed to be secured in vehicle
seats by lap belts or by the lap portion of a lap-shoulder belt.
*
[SS16250(R)01/96]
RWARNING
Seatbacks should be upright for use with child safety
seats.
File:06unssr.ex
Update:Fri Mar 21 09:43:41 1997

134
[SS16280(R)01/96]
17-1/2 pica
art:0011286-A[SS16300(R)05/96]
RWARNING
Always keep the buckle release button pointing upward
and away from the child seat, with the tongue button
between the child seat and the release button as shown
in the following illustration.
*
[SS16370(R)03/96]
RWARNING
If you do not properly secure the safety seat, the child
occupying the seat may be injured during a collision or
sudden stop. An unsecured safety seat could also injure
other passengers.
File:06unssr.ex
Update:Fri Mar 21 09:43:41 1997

138
[SS16560(R)03/96]4.
Insert the belt tongue into the proper buckle for that seating
position until you hear and feel the latch engage. Make sure
the tongue is latched securely by pulling on it.
[SS16570(R)03/96]
17-1/2 pica
art:0011240-B
Buckling the belt
File:06unssr.ex
Update:Fri Mar 21 09:43:41 1997

142
[SS16640(R)03/96]8.
Allow the safety belt to retract to remove any slack in the
belt.
[SS16650(R)03/96]9.
Before placing the child in the seat, forcibly tilt the seat
forward and back to make sure the seat is securely held in
place.
[SS16660(R)03/96]
17-1/2 pica
art:0011244-B
Checking that the seat is secure
[SS16670(R)03/96]10.
Try to pull belt out of the retractor to make sure the
retractor is in the automatic locking mode (you should not
be able to pull more belt out). If the retractor is not locked,
unbuckle the belt and repeat steps 2 through 9.
[SS16680(R)03/96]
To remove the retractor from automatic locking mode, allow
webbing to retract fully to its stowed position and the retractor
will automatically switch back to the vehicle sensitive locking
mode for normal adult usage.
File:06unssr.ex
Update:Fri Mar 21 09:43:41 1997

188
[GF28450(R)01/96]
Secure all items in cargo area to prevent them from falling out
and creating a safety hazard on the roadway.
[GF28500(R)05/96]
17-1/2 pica
art:0090120-D
Cargo tie-down holes and brackets
[GF28575(R)01/96]
10-1/2 pica
art:0020968-B
Cargo tie-down hooks Ð Splash pickup box
File:09ungfr.ex
Update:Thu Mar 20 08:55:24 1997

250
%*
[MC01400(R)05/96]
NOTE: Always dispose of used automotive fluids in a
responsible manner. Follow your community's
standards for disposing of these types of fluids. Call
your local recycling center to find out about recycling
automotive fluids.
%*
[MC01600(R)01/96]
Precautions When Servicing Your Vehicle
*
[MC01700(R)01/96]
Be especially careful when inspecting or servicing your vehicle.
Here are some general precautions for your safety:
*
[MC01900(R)01/96]
n
If you must work with the engine running, avoid wearing
loose clothing or jewelry that could get caught in moving
parts. Take appropriate precautions with long hair.
*
[MC02000(R)01/96]
n
Do not work on a vehicle in an enclosed space with the
engine running, unless you are sure you have enough
ventilation.
*
[MC02100(R)01/96]
n
Never get under a vehicle while it is supported only by a
jack. If you must work under a vehicle, use safety stands.
*
[MC02200(R)01/96]
n
Keep all lit cigarettes and other smoking materials away
from the battery and all fuel-related parts.
*
[MC02500(R)01/96]
If you disconnect the battery, the engine must ªrelearnº its idle
conditions before your vehicle will drive properly. To find out
how the engine does this, seeBatteryin this chapter.
*
[MC02600(R)01/96]
Working with the engine off:
*
[MC02660(R)01/96]1.
Set the parking brake fully and make sure that the gearshift
is securely latched in P (Park).
*
[MC02700(R)01/96]2.
Remove the key from the ignition after you turn the engine
off.
*
[MC02725(R)01/96]3.
Block the wheels. This will prevent your vehicle from
moving unexpectedly.
File:11unmcr.ex
Update:Thu Mar 20 08:58:43 1997

252
[MC03700(R)01/96]
17-1/2 pica
art:0020338-G
Hood and support
*
[MC03775(R)01/96]
NOTE: Read and understandPrecautions When Servicing Your
Vehicleat the beginning of this chapter before
opening the hood.
*
[MC03800(R)01/96]
To close the hood, raise it so that the support rod comes away
from the slotted hole in the hood. Place the support rod in its
retaining clip and close the hood with enough force to make it
latch. Be sure to oil the hood latch every six months to maintain
smooth operation.
*
[MC03900(R)01/96]
Always attempt to lift the hood after closing to be sure it is
securely latched.
File:11unmcr.ex
Update:Thu Mar 20 08:58:43 1997

258
*
[MC13730(R)05/96]
NOTE: Ford production and aftermarket (Motorcraft) oil
filters are designed for added engine protection and
long life. If a replacement oil filter is used that does
not meet Ford material and design specifications,
startup engine noises or knock may be experienced. It
is recommended you use the appropriate Motorcraft
oil filter (or another brand meeting Ford
specifications) for your engine application.
%*
[MC13775(R)01/96]
Checking and Adding Engine Oil
*
[MC13800(R)01/96]
Since the proper amount of engine oil is important for safe
engine operation, check the oil using the dipstick each time you
put fuel in your vehicle. Remember the engine must be off, the
oil must be warm and the vehicle must be parked on level
ground.
%*
[MC13900(R)01/96]
Checking the engine oil level:
*
[MC14000(R)01/96]1.
Turn the engine off after it has warmed up and allow a few
minutes for the engine oil to drain back into the oil pan.
[MC14050(R)04/96]2.
Set the parking brake, making sure the gearshift is securely
latched in P (Park) or 1 (manual transmission).
*
[MC14100(R)01/96]3.
Open the hood. Protect yourself from engine heat.
*
[MC14200(R)01/96]4.
Locate the engine oil dipstick (highlighted in yellow) and
carefully pull it out of the engine.
*
[MC14300(R)01/96]5.
Wipe the dipstick clean and put it back into position, making
sure it is fully seated.
File:11unmcr.ex
Update:Thu Mar 20 08:58:43 1997

Maintenance and Care
287
*
[MC31600(R)01/96]
n
Put the chains on tightly with the ends held down securely.
Verify that no chain touches any wiring, brake lines, or fuel
lines. Follow the chain manufacturer's instructions.
*
[MC31700(R)01/96]
n
Drive slowly. If you can hear the chains rub or bang against
your vehicle, stop the vehicle and tighten the chains. If you
continue to hear the chains rub or bang against your vehicle,
remove the chains to prevent damage to your vehicle.
*
[MC31800(R)01/96]
n
Avoid fully loading your vehicle if possible.
*
[MC31850(R)01/96]
n
Tire chains may affect vehicle handling. Drive carefully and
avoid hard braking.
[MC31900(R)01/96]
Remove tire chains at the first opportunity after using them on
snow and ice. Do not use the chains on dry roads.
*
[MC31950(R)01/96]
n
Make sure your suspension insulation and bumpers are not
missing or worn to avoid damage to your vehicle.
%*
[MC31960(R)03/96]
Cleaning the Wheels
*
[MC31970(R)03/96]
Wash the wheels with the same detergent you use to wash your
vehicle's body. Do not use acid-based wheel cleaners, steel wool,
abrasives, fuel, or strong detergents. These substances will
damage protective coatings. Use tar and road oil remover to
remove grease and tar.
*
[MC31975(R)03/96]
NOTE: Before going to a car wash, find out if the brushes are
abrasive.
[MC31980(R)01/96]
If you have raised white letter tires that are difficult to clean
with regular detergent, use whitewall tire cleaner. Follow the
directions on the container and rinse the tires with plenty of
clean water.
File:11unmcr.ex
Update:Thu Mar 20 08:58:43 1997