compressor FORD S-MAX 2006 Service User Guide

42. \f
43. \f
44. Remove\fthe\frefriger\bnt\fcompressor\f\bnd\fsecure\fto\fone\fside.\f
General \bqui\fment: C\bble\fties\f
45 .

\f
46. \f
\f\f
\f\f
\f\f
\f\f
\f\f
Стр. 9 из
12
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G860199&gui...procarmanuals.com
http://vnx.su

Engine - \b.5L \furatec (16\bkW/\b\b0PS) -
VI5 - Valve Stem SealsS-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
Removal and Installation
Special Tool(s)
Removal
303-361B\f
Compressor,\fV\blve\fSpring\f
303-361B-06\f
Ad\bpter\ffor\f303-361B\f
303-363\f
Ad\bpter,\fAir\fSupply\f(Cylinder\fHe\bd)
\f
303-508\f
Pliers,\fV\blve\fStem\fSe\bl\f
1. Remove\fthe\fc\bmsh\bfts.\f Refer\fto:\f C\bmsh\bfts \f(303-01D\fEngine\f-\f2.5L\f
Du r

\btec\f(162kW/220PS)\f-\fVI5,\fRemov\bl\f\bnd\f
Inst\bll\btion).\f
2. \f
3. Using\fthe\fspeci\bl\ftool,\f\bpply\f7\fto\f10\fb\br\fof\f compressed\f\bir\finto\fthe\fcylinder.\f
Special\bTool(\f):\b 303-363\f
\f
\f
\f
\f
\f\f
Стр. 1 из 2
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G543490&gui...procarmanuals.com
http://vnx.su

27. Position\fthe\fPAS\fpump\fto\fone\fside.\f
28. Position\fthe\fA/C\fcompressor\fto\fone\fside.\f29. WARNING:\fM\bke\fsure\fth\bt\fthe\fengine\f
\b n

d\ftr\bnsmission\f\bssembly\fis\fon\fwooden\f
blocks\f\bnd\fsecured\fwith\fsuit\bble\fret\bining\f
str\bps.\f
General \bqui\fment: Mo
unting\ft\bble\fset\f
30. \f
31. \f
\f\f
\f\f
\f\f
\f\f
\f\f
Стр. 6 из
9
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G543497&gui...procarmanuals.com
http://vnx.su

Engine - \b.5L \furatec (16\bkW/\b\b0PS) -
VI5 - Cylinder HeadS-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
\fisassembly and Assembly of Subassemblies
Special Tool(s)
\fisassembly
As

sembly
303-361B\f
Compressor,\fV\blve\fSpring
\f
303-361B-06\f
Ad\bpter\ffor\f303-361B\f
303-508\f
Pliers,\fV\blve\fStem\fSe\bl\f1. Special\bTool(\f):\b 303-361B,\f303-361B-06 \f
2. Sp

ecial\bTool(\f):\b 303-508\f
3. T

o\finst\bll,\freverse\fthe\f\bssembly\fprocedure.\f
\f
\f
\f
\f\f
\f\f
Стр. 1 из 1
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G543499&gui...procarmanuals.com
http://vnx.su

Materials
General Equipment
303-318\f
Aligner/Inst\bller,\fCr\bnksh\bft\fFront\fSe\bl
\f
NameSpec\bf\bcat\bo\f
Engine\fOil\f-\f5W-30WSS-M2C913-C
Fl\bnge\fSe\bl\bnt\f-\fAn\berobic\fLPWSK-M2G348-A7\f/\f5U7J-M2G348-BA
Piston ring compressor
Round-ended steel rule1.
NOTE:\fThis\fstep\fis\f
only\fnecess\bry\f
when\finst\blling\f\b\f
new\fcomponent.
Refer\fto:\f
Specific\btions
01D\fEngine\f
Dur\btec\f
(162kW/220PS)\f
Specific\btions).
2.CAUTION:\f
M\bke\fsure\fth\bt\fthe\f
components\f\bre\f
inst\blled\fto\fthe\f
position\fnoted\f
before\fremov\bl.
Apply\f\b\fthin\fco\bting.
Material\b
5W-30\f(WSS
M2C913-
\f
\f
\f
Стр. 2 из 17
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G543500&gui...procarmanuals.com
http://vnx.su

11.CAUTION:\fM\bke\fsure\fth\bt\fthe\fcomponents\f\bre\finst\blled\f
to\fthe\fposition\fnoted\fbefore\fremov\bl.\f
General E\fuipment\b Pi
ston\fring\fcompressor\f
12.CAUTION:\fM\bke\fsure\fth\bt\fthe\fcomponents\f\bre\finst\blled\f
to\fthe\fposition\fnoted\fbefore\fremov\bl.\f
Apply\f\b\fthin\fco\bting.\f
Mat

erial\b Engine\fOil\f-\f5W-30\f(WSS-M2C913-C) \f
13.CAUTIONS:
M\bke\fsure\fth\bt\f
the\fcomponents\f
\bre\finst\blled\fto\fthe\f
position\fnoted\f
before\fremov\bl.
M\bke\fsure\fth\bt\f
new\fbolts\f\bre\f
inst\blled.
Apply\f\b\fthin\fco\bting.
Material\b
\f
\f\f
\f\f
Стр. 5 из 17
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G543500&gui...procarmanuals.com
http://vnx.su

Engine - \b.8L \furatorq-T\fCi
(74kW/\b00PS) - Lynx/\b.8L \furatorq-
T\fCi (92kW/\b25PS) - Lynx - Valve
Clearance Adjustment
S-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
General Procedures
Special Tool(s)
303-195\f
Compressor,\fV\blve\fSpring
\f
303-196\f
Pliers,\fV\blve\fShim\f
1. Remove\fthe\fv\blve\fcover.\fRefer\fto:\f V\blve\fCover \f(303-01E\fEngine\f-\f1.8L\f
Dur

\btorq-TDCi\f(74kW/100PS)\f-\fLynx/1.8L\f
Dur\btorq-TDCi\f(92kW/125PS)\f-\fLynx,\fRemov\bl\f
\bnd\fInst\bll\btion).\f
2. \f
3. Torque:\b 20\fNm
\f
4. NOTE:\fUsing\f\b\fsuit\bble\ffeeler\fg\buge,\f
me

\bsure\fthe\fv\bl\bve\fcle\br\bnce.\f
Rot\bte\fthe\fcr\bnksh\bft\funtil\fthe\fc\bm\fp\bir\fof\f
th

e\fcylinder\fto\fbe\f\bdjusted\f\bre\fpointing\f
upw\brds.\f

Check\fthe\fv\blve\fcle\br\bnce\f\bnd\fnote\fthe\f
v\bl

ues.\f

If\fthe\fv\blues\fof\fone\for\fmore\f\bdjustment\f
sh

ims\f\bre\foutside\fthe\ftoler\bnce\fr\bnge,\f
renew\fthe\f\bdjustment\fshim\f\bs\fdescribed\fin\f
the\ffollowing\fstep.\f
5. NOTE:\fRot\bte\fthe\fcr\bnksh\bft\fby\f\b\ffurther\f90\f
d
e

grees.\f
NOTE:\fThe\fpiston\fof\fthe\fcylinder\fto\fbe\f
\bdjusted\fmust\fnot\fbe\f\bt\fTDC.\f

Note\fthe\fthickness\fof\fthe\f\bdjustment\fshim,\f
\f
\f
\f\f
\f\f
\f\f
Стр. 1 из 2
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G543570&gui...procarmanuals.com
http://vnx.su

Engine - \b.8L \furatorq-T\fCi
(74kW/\b00PS) - Lynx/\b.8L \furatorq-
T\fCi (92kW/\b25PS) - Lynx - Valve Stem
Seals
S-MAX/G\bl\bxy\f2006.5\f(02/2006-)\fPrint \f
Removal and Installation
Special Tool(s)
Mat

erials
Removal
N O

TE:\fRemov\bl\fsteps\fin\fthis\fprocedure\fm\by\fcont\bin\finst
\bll\btion\fdet\bils.\f
303-037\f
Inst\bller,\fV\blve\fStem\fSe\bl\f
303-060\f
Compressor,\fV\blve\fSpring\f
303-060-05\f
Ad\bpter\ffor\f303-060\f
303-362\f
Inst\bller,\fV\blve\fStem\fCollets
\f
303-390\f
Pliers,\fV\blve\fStem\fSe\bl\f
NameSpec\bf\bcat\bo\f
Engine\fOil\f-\f5W-30WSS-M2C912-A1
1. Remove\fthe\fc\bmsh\bft.\fRefer\fto:\f C\bmsh\bft\f(303-01E\fEngine\f-\f1.8L\f
Du r

\btorq-TDCi\f(74kW/100PS)\f-\fLynx/1.8L\f
Dur\btorq-TDCi\f(92kW/125PS)\f-\fLynx,\fRemov\bl\f
\bnd\fInst\bll\btion).\f
2. Position\fthe\f\bpropri\bte\fpiston\f\bt\ftop\fde\bd\fcenter\f (TDC).\f
3. Special\bTool(\f):\b 303-060,\f303-060-05,\f 303-362\f
4. Sp

ecial\bTool(\f):\b 303-390\f
\f
\f
\f
\f
\f
\f\f
Стр. 1 из 2
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G543573&gui...procarmanuals.com
http://vnx.su

10. \f
11. \f
12. Refer\fto:\fAccessory\fDrive\fBelt \f(303-05D\f
Ac c

essory\fDrive\f-\f1.8L\fDur\btorq-TDCi\f
(74kW/100PS)\f-\fLynx/1.8L\fDur\btorq-TDCi\f
(92kW/125PS)\f-\fLynx,\fRemov\bl\f\bnd\fInst\bll\btion).
\f
13. Secure\fthe\f\bir\fconditioning\f(A/C)\fcompressor\fto\f one\fside.\f
General \bqui\fment: C\bble\fties\f
14.

\f
\f
\f\f
\f\f
\f\f
Стр. 3 из 11
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G543575&gui...procarmanuals.com
http://vnx.su

29. \f
30. Secure\fthe\fA/C\fcompressor\fto\fone\fside.\fGeneral \bqui\fment: C\bble\fties\f
31 .

Remove\fthe\fst\brter\fmotor.\f
Refer\fto:\f St\brter\fMotor \f(303-06D\fSt\brting\fSystem\f-
\f
1.8L\fDur\btorq-TDCi\f(74kW/100PS)\f-\fLynx/1.8L\f
Dur\btorq-TDCi\f(92kW/125PS)\f-\fLynx,\fRemov\bl\f\bnd\f
Inst\bll\btion).\f
32. NOTE:\fOnly\frot\bte\fthe\fcr\bnksh\bft\fin\fthe\fnorm\bl\f
di

rection\fof\frot\btion.\f1. Remove\fthe\fcylinder\fblock\fbl\bnking\fplug\f\bnd\f in
st\bll\fthe\fspeci\bl\ftool.\f
S\fecial Tool(s): 303-193\f
2.
Rot\bte\fthe\fcr\bnksh\bft\fslowly\funtil\fthe\fcr\bnksh\bft\f
stops.\f
3. Make sure that the crankshaft does not
rotate during installation of the special
tool.
Make sure that the crankshaft is at the
T\fC position before locking the special
tool.
Using\fthe\fspeci\bl\ftool,\flock\fthe\fcr\bnksh\bft.
S\fecial Tool(s): 303-393\f
33.
Loosen\fthe\fch\brge\f\bir\fcooler\foutlet\fpipe\f\bnd\fput\fit\f
\bside.\f
\f\f
\f\f
\f\f
\f\f
Стр. 7 из
19
05.01.2013http://127.0.0.1:8888/wsm/js/procedure.do?variantId=1431&proc-uid=G543577&gui...procarmanuals.com
http://vnx.su