FORD WINDSTAR 2002 2.G Rear Seat Entertainment System Manual

INDICATIONS ON THE VCP
The operation and status of the VCP
can be checked by the indications
appearing on the LED display.
1. ThePower indicatorflashes on
during POWER ON and will blink
when in emergency mode.
2. TheHI-FI indicatorilluminates
when a HI-FI tape is loaded.
3. TheHP1 indicatorilluminates
when the headphone jack 1 is plugged in.
4. TheHP2 indicatorilluminates when the headphone jack 2 is plugged
in.
5. TheOperation indicatorsilluminate when the system is powered
ON, a HIFI tape is being played, or headphones are being used.
The following are some possible messages that may illuminate on your
LED display and their meanings.
Illuminates when there is a
videocassette in the system during
power off.
Illuminates when there is a
videocassette in the system during
power on.
Illuminates when a videocassette is
ejected from the system.
Flashes during wait mode.
Illuminates during power on when
there is not a videocassette present
in the system.
43
215
Videocassette Player Display Messages
21

Illuminates during power off when
there is not a cassette present in
the system.
Illuminates when the videocassette
is in REW (rewind) mode.
Illuminates when the videocassette
is in FF (fast forward) mode.
Illuminates when the videocassette
is in STIL (pause) mode.
Illuminates when the videocassette
is in PLAY mode.
Illuminates when the videocassette
is in REV (review) mode.
Illuminates when the videocassette
is in CUE mode.
Flashes separately when the
videocassette is in ENCORE mode.
Displays when:
²
the thermistor detects an
extremely high or low temperature
²the dew sensor is activated for high humidity
Videocassette Player Display Messages
22

IN-HOME USE
Your AutoVisiontVideo Entertainment System is UL registered for
in-home use. This system has the unique feature of also being a
completely portable and able to be used in your home.
To remove your AutoVisiontVideo Entertainment System from your
vehicle, depress the lever on the center console labeled VCP RELEASE.
This will release the VCP and enable you to remove the system from the
vehicle.If pressing the lever does not release your system, please
contact your dealer.
To re-install the VCP in your vehicle, insert the VCP into the console and
push lightly until the VCP clicks into place.
To use the AutoVisiontVideo Entertainment System in your home, you
will need:
²12 V DC power converter rated for 1.5 amps/min
²Patch cords with RCA style connectors
These parts are available in your local electronics store or call toll free
1 (877) 848±6434 for assistance.
AUXILIARY JACKS FOR HOME USE
1.VIDEO OUT
Connect this terminal to the
VIDEO IN terminal of your display
(LCD, TV).
2.DC jack in
Connect this jack to the DC
source (DC 12V).
3.AUDIO OUT LR
Connect these terminal(s) to the
AUDIO IN terminals of your
display (LCD, TV).
2
1
3
In-Home Use
23

1.VIDEO IN
Connect this terminal to the
VIDEO OUT terminal of your
other apparatus (DVD, game
machine, etc.).
2.AUDIO IN LR
Connect these terminal(s) to the
AUDIO OUT terminals of your
other apparatus (DVD, game
machine, etc.).
3.
Plug headphones into these jacks.
In-Home Use
24