GENESIS G80 2023 Owners Manual
Page 451 of 661
7-59
07
OJK071213N
(1) Speed Limit indicator
(2) Set speed
You can set the speed limit when you do
not want to drive over a specific speed.
If you drive over the preset speed limit,
Manual Speed Limit Assist will operate
(set speed limit will blink and chime will
sound) until the vehicle speed returns
within the speed limit.
Manual Speed Limit Assist
Operation
Setting speed limit
ORG3EV071028L
1. Press and hold Driving Assist
() button at the desired speed. The
Speed Limit () indicator will
illuminate on the cluster.
ORG3EV071029L
2. Push the + switch up or - switch down,
and release it at the desired speed.
Push the + switch up or - switch down
and hold it. The speed will increase
or decrease to the nearest multiple of
five (multiple of ten in km/h) at first,
and then increase or decrease by 5
mph (10 km/h).
0 $ 1 8 $ / 6 3 ( ( ' / , 0 , 7 $ 6 6 , 6 7
Page 452 of 661
7-60
Driver Assistance System
OJK071214N
3. The set speed limit will be displayed
on the cluster.
If you would like to drive over the
preset speed limit, depress the
accelerator pedal beyond the pressure
point to activate the kickdown
mechanism.
The set speed limit will blink and
chime will sound until you return the
vehicle speed within the speed limit.
Information
[ When the accelerator pedal is not
depressed beyond the pressure point,
vehicle speed will maintain within the
speed limit.
[ A clicking sound may be heard from
the kickdown mechanism when the
accelerator pedal is depressed beyond
the pressure point.
Temporarily pausing Manual Speed
Limit Assist
ORG3EV071111L
Press the switch to temporarily
pause the set speed limit. The set speed
limit will turn off but the Speed Limit
(
) indicator will stay on.
Page 453 of 661
7-61
07
Resuming Manual Speed Limit Assist
ORG3EV071029L
To resume Manual Speed Limit Assist
after the function was paused, operate
the +, -,
switch.
If you push the + switch up or – switch
down, vehicle speed will be set to the
current speed on the cluster.
If you press the
switch, vehicle
speed will resume to the preset speed.
Turning off Manual Speed Limit
Assist
ORG3EV071028L
Press the Driving Assist () button to
turn Manual Speed Limit Assist off. The
Speed Limit (
) indicator will go
off.
WARNING
Take the following precautions when
using Manual Speed Limit Assist:
[ $ O Z D \ V V H W W K H Y H K L F O H V S H H G W R W K H
V S H H G O L P L W L Q \ R X U F R X Q W U \ O R F D O
D U H D
[ Keep Manual Speed Limit Assist off
Z K H Q W K H I X Q F W L R Q L V Q R W L Q X V H W R
D Y R L G L Q D G Y H U W H Q W O \ V H W W L Q J D V S H H G
Check that the Speed Limit (
)
L Q G L F D W R U L V R I I
[ Manual Speed Limit Assist does
Q R W V X E V W L W X W H I R U S U R S H U D Q G V D I H
G U L Y L Q J , W L V W K H U H V S R Q V L E L O L W \ R I
W K H G U L Y H U W R D O Z D \ V G U L Y H V D I H O \
D Q G V K R X O G D O Z D \ V E H D Z D U H R I
X Q H [ S H F W H G D Q G V X G G H Q V L W X D W L R Q V
I U R P R F F X U U L Q J 3 D \ D W W H Q W L R Q W R W K H
U R D G F R Q G L W L R Q V D W D O O W L P H V
Page 454 of 661
7-62
Driver Assistance System
Intelligent Speed Limit Assist uses
information from the detected road sign
and navigation system to inform the
driver of the speed limit and additional
information of the current road. Also,
Intelligent Speed Limit Assist helps the
driver to maintain within the speed limit
of the road.
& $ 8 7 , 2 1
[ , Q W H O O L J H Q W 6 S H H G / L P L W $ V V L V W P D \
Q R W R S H U D W H S U R S H U O \ L I W K H I X Q F W L R Q L V
X V H G L Q R W K H U F R X Q W U L H V
[ , I D Q D Y L J D W L R Q V \ V W H P L V H T X L S S H G W R
\ R X U Y H K L F O H W K H Q D Y L J D W L R Q Q H H G V W R
E H U H J X O D U O \ X S G D W H G I R U , Q W H O O L J H Q W
Speed Limit Assist to operate
S U R S H U O \
Detecting sensor
ORG3EV071074[1]: Front view camera
Refer to the picture above for the
detailed location of the detecting sensor.
& $ 8 7 , 2 1
For more details on the precautions
R I W K H I U R Q W Y L H Z F D P H U D U H I H U W R
U ) R U Z D U G & R O O L V L R Q $ Y R L G D Q F H $ V V L V W
) & $ V V H F W L R Q L Q W K L V F K D S W H U
Information
If a navigation system is available, the
information from the navigation system is
used along with the road sign information
detected by the front view camera.
, 1 7 ( / / , * ( 1 7 6 3 ( ( ' / , 0 , 7 $ 6 6 , 6 7
Page 455 of 661
7-63
07
Intelligent Speed Limit Assist
Settings
Setting features
ORG3EV071346AU
Speed Limit
With the vehicle on, select or deselect
S ' U L Y H U $ V V L V W D Q F H
Page 456 of 661
7-64
Driver Assistance System
Intelligent Speed Limit Assist
Operation
Warning and control
Intelligent Speed Limit Assist will warn
and control vehicle speed by ‘Displaying
speed limit’, ‘Warning overspeed’ and
‘Changing set speed’.
Information
Intelligent Speed Limit Assist warning
and control are described based on the
Offset adjusted to '0'. For details on Offset
setting, refer to the “Intelligent Speed
Limit Assist Settings”.ORG3EV071030N
Displaying speed limit
Speed limit information is displayed on
the instrument cluster.
Information
[ If speed limit information of the road
cannot be recognized, '---' sign will be
displayed. Please refer to "Limitations
of Intelligent Speed Limit Assist" if the
road signs are difficult to recognize.
[ Intelligent Speed Limit Assist provides
additional road sign information in
addition to speed limit. The additional
road sign information provided may
vary according to your country.
[ Supplementary sign displayed under
the speed limit or overtaking restriction
sign means the conditions under which
the signs must be followed. If the
supplementary sign is not recognized, it
will be displayed as blank.
[ The images and colors in the cluster
may differ depending on the cluster
type or theme selected from the cluster.
Page 457 of 661
7-65
07
ORG3EV071031N
Warning overspeed
When driving at a speed higher than the
displayed speed limit, the red speed limit
indicator will blink.
OJK071183NOJK071190N
Changing set speed
If the speed limit of the road changes
during the operation of Manual Speed
Limit Assist or Smart Cruise Control, an
arrow in the direction of up or down is
displayed to inform the driver that the set
speed needs to be changed. At this time,
the driver can change the set speed
according to the speed limit by using the
+ or – switch on the steering wheel.
WARNING
[ , I W K H 2 I I V H W L V D G M X V W H G R Y H U S T W K H
set speed will change to a higher
speed than the speed limit of the
U R D G , I \ R X Z D Q W W R G U L Y H E H O R Z W K H
V S H H G O L P L W D G M X V W W K H 2 I I V H W X Q G H U
'0' or use the – switch on the steering
Z K H H O W R O R Z H U W K H V H W V S H H G
[ ( Y H Q D I W H U F K D Q J L Q J W K H V H W V S H H G
according to the speed limit of the
U R D G W K H Y H K L F O H F D Q V W L O O E H G U L Y H Q
R Y H U W K H V S H H G O L P L W , I Q H F H V V D U \
G H S U H V V W K H E U D N H S H G D O W R U H G X F H
\ R X U G U L Y L Q J V S H H G
[ If the speed limit of the road is under
P S K N P K W K H V H W V S H H G
F K D Q J H I X Q F W L R Q Z L O O Q R W Z R U N
[ Intelligent Speed Limit Assist
operates using the speed unit in the
L Q V W U X P H Q W F O X V W H U V H W E \ W K H G U L Y H U
If the speed unit is set to a unit other
W K D Q W K H V S H H G X Q L W X V H G L Q \ R X U
F R X Q W U \ , Q W H O O L J H Q W 6 S H H G / L P L W
$ V V L V W P D \ Q R W R S H U D W H S U R S H U O \
Information
[ For more details on Manual Speed
Limit Assist operation, refer to
“Manual Speed Limit Assist (MSLA)”
section in this chapter.
[ For more details on Smart Cruise
Control operation, refer to “Smart
Cruise Control (SCC)” section in this
chapter.
Page 458 of 661
7-66
Driver Assistance System
Intelligent Speed Limit Assist
Malfunction and Limitations
Intelligent Speed Limit Assist
malfunction
OJK071215N
When Intelligent Speed Limit Assist is not
working properly, the ‘Check Speed Limit
system’ warning message will appear on
the cluster for several seconds, and the
master (
) warning light will illuminate
on the cluster. If this occurs, have the
vehicle inspected by an authorized
retailer of Genesis Branded products.
Intelligent Speed Limit Assist
disabled
OJK071216N
When the front windshield where the
front view camera is located is covered
with foreign material, such as snow
or rain, it can reduce the detecting
performance and temporarily limit or
disable Intelligent Speed Limit Assist.
If this occurs, the ‘Speed Limit system
disabled. Camera obscured’ warning
message will appear on the cluster.
Intelligent Speed Limit Assist will operate
properly when snow, rain or foreign
material is removed.
If Intelligent Speed Limit Assist does not
operate properly after it is removed, have
the vehicle inspected by an authorized
retailer of Genesis Branded products.
WARNING
[ ( Y H Q W K R X J K W K H Z D U Q L Q J P H V V D J H R U
warning light does not appear on the
F O X V W H U , Q W H O O L J H Q W 6 S H H G / L P L W $ V V L V W
P D \ Q R W R S H U D W H S U R S H U O \
[ If the detecting sensor is
F R Q W D P L Q D W H G L P P H G L D W H O \ D I W H U
V W D U W L Q J W K H Y H K L F O H , Q W H O O L J H Q W
6 S H H G / L P L W $ V V L V W P D \ Q R W R S H U D W H
S U R S H U O \
Page 459 of 661
7-67
07
Limitations of Intelligent Speed
Limit Assist
Intelligent Speed Limit Assist may not
operate properly, or it may operate
unexpectedly under the following
circumstances:
[ The road sign is contaminated or
indistinguishable
-The road sign is difficult to see due
to bad weather, such as rain, snow,
fog, etc.
-The road sign is not clear or
damaged
-The road sign is partially obscured
by surrounding objects or shadow
-A road sign near the road you are
driving is detected
[ The road signs do not conform to the
standard
-The text or picture on the road sign
is different from the standard
-The road sign is installed between
the main line and the exit road or
between diverging roads
-There is no conditional road signs
on the road sign located on the exit
road
-A sign is attached to another vehicle
[ The distance between the vehicle and
the road signs is too far
[ The vehicle encounters illuminant
road signs
[ Intelligent Speed Limit Assist
incorrectly recognizes numbers in the
street signals or other signs as the
speed limit
[ A road sign near the road you are
driving is detected
[ Multiple signs are installed close
together
[ The minimum speed limit sign is
misrecognized
[ The minimum speed limit sign is on
the road[ The brightness changes suddenly, for
example when entering or exiting a
tunnel or passing under a bridge
[ Headlamps are not used or the
brightness of the headlamps are weak
at night or in the tunnel
[ Road signs are difficult to recognize
due to the reflection of sunlight, street
lights, or oncoming vehicles
[ The navigation information or GPS
information contain errors.
[ The driver does not follow the guide
of the navigation.
[ The driver is driving on a new road
that is not in the navigation system
yet.
[ The field of view of the front view
camera is obstructed by sun glare
[ Driving on a road that is sharply
curved or continuously curved
[ Driving through speed bumps, or
driving up and down or left to right on
steep inclines
[ The vehicle is shaking heavily
Information
For more details on the limitations of the
front view camera, refer to “Forward
Collision-Avoidance Assist (FCA)” section
in this chapter.
WARNING
[ Intelligent Speed Limit Assist is a
supplemental function that helps the
G U L Y H U W R F R P S O \ Z L W K W K H V S H H G O L P L W
R Q W K H U R D G D Q G P D \ Q R W G L V S O D \ W K H
correct speed limit or control the
G U L Y L Q J V S H H G S U R S H U O \
[ $ O Z D \ V V H W W K H Y H K L F O H V S H H G W R W K H
V S H H G O L P L W L Q \ R X U F R X Q W U \ O R F D O
D U H D
Page 460 of 661
7-68
Driver Assistance System
' 5 , 9 ( 5 $ 7 7 ( 1 7 , 2 1 : $ 5 1 , 1 *