fuse GENESIS G80 2023 Owners Manual

Page 43 of 661

1-38
Foreword / Starting Your Electric Vehicle
ÃExample for setting the ICCB charge level
The example is only for reference and may vary according to the surrounding
environment.
Outlet current ICCB charge level Control box display window
14-16A 12A
ORG3EVQ011076
13-12A 10A
11-10A 8A
9-8A 6A
CAUTION
Please make sure that charge level selection matches the capacity of your circuit
breaker to avoid blown fuse.

Page 77 of 661

2-7
02
The actual motor compartment in the vehicle may differ from the illustration.
ORG3EV091001
1. Low conductivity coolant reservoir ...... 9-12
2. Coolant reservoir ................................... 9-12
3. Brake fluid reservoir .............................. 9-144. Windshield washer fluid reservoir ........ 9-15
5. Fuse box ................................................ 9-38
6. Cabin air filter ........................................ 9-16
MOTOR COMPARTMENT

Page 156 of 661

4
LCD Display Messages ................................................................................................4-21
Shift to P ....................................................................................................................4-21
Vehicle is in N. Press START button and shift to P ..................................................4-21
Low key battery ........................................................................................................4-21
Press START button while turning wheel ................................................................4-21
Low washer fluid .......................................................................................................4-21
Press brake pedal to start vehicle ...........................................................................4-21
Key not in vehicle .....................................................................................................4-21
Key not detected .......................................................................................................4-21
Press START button again .......................................................................................4-21
Place the smart key in the emergency start slot and press the start button .......4-21
Check BRAKE SWITCH fuse ................................................................................... 4-22
Shift to P to start vehicle ......................................................................................... 4-22
Battery discharging due to external electrical devices ......................................... 4-22
Door, Hood, Trunk open indicator .......................................................................... 4-22
Low tire pressure ..................................................................................................... 4-22
Lights ........................................................................................................................4-23
Wiper ........................................................................................................................ 4-23
Check headlight ....................................................................................................... 4-24
Check turn signal ..................................................................................................... 4-24
Check headlamp LED .............................................................................................. 4-24
Shift to P to charge .................................................................................................. 4-24
Remaining time ........................................................................................................ 4-24
Unplug vehicle to start ............................................................................................ 4-25
Charging door open ................................................................................................. 4-25
Charging stopped. Check the AC/DC charger ....................................................... 4-25
Charging stopped. Check the cable connection ...................................................4-26
Check regenerative brakes......................................................................................4-26
Low EV battery .........................................................................................................4-26
Charge immediately. Power limited ....................................................................... 4-27
Power limited due to low EV battery temperature. Charge battery ..................... 4-27
EV battery overheated! Stop vehicle ......................................................................4-28
Power limited ...........................................................................................................4-28
Stop vehicle and check power supply ....................................................................4-29
Check electric vehicle system ................................................................................4-29

Page 176 of 661

4-22
Instrument Cluster
Check BRAKE SWITCH fuse
This message is displayed if the brake
switch fuse is disconnected.
You need to replace the fuse with a new
one before starting the vehicle.
If that is not possible, you can start the
vehicle by pressing the Start/Stop button
for 10 seconds in the ACC position.
Shift to P to start vehicle
This message is displayed if you try to
start the vehicle in any other position
except P (Park) or N (Neutral).
Information
You can start the vehicle with the gear in
N (Neutral). But, for your safety, start the
vehicle with the gear shifted to P (Park).
Battery discharging due to external
electrical devices
This message is displayed if the 12V
battery voltage is weak due to any
non-factory electrical accessories (ex.
dashboard camera) while parking. Be
careful that the battery is not discharged.
If the message appears after removing
the non-factory electrical accessories,
have the vehicle inspected by an
authorized retailer of Genesis Branded
products.
Door, Hood, Trunk open indicator
ORG3EV041020
This warning is displayed if any door or
hood or trunk is left open. The warning
will indicate which door is open in the
display.
CAUTION
Before driving the vehicle, you should
confirm that the door/ hood/trunk are
fully closed.
Low tire pressure
ORG3EV041056L
This warning message is displayed if the
tire pressure is low. The corresponding
tire on the vehicle will be illuminated.
For more details, refer to “Tire Pressure
Monitoring System (TPMS)” section in
chapter 8.

Page 222 of 661

5-28
Convenience Features
Information
[In cold and wet climates, door lock
and door mechanisms may not work
properly due to freezing conditions.
[,IWKHGRRULVORFNHGXQORFNHGPXOWLSOH
times in rapid succession with either
the vehicle key or door lock switch, the
system may stop operating temporarily
in order to protect the circuit and
prevent damage to system components.
Power door latch (if equipped)
ORG3EV051011
If a door isn’t closed completely but is
closed to the first detent position, the
door will close automatically.
CAUTION
To reduce the risk of injury:
[Before closing the door, check there
are no obstructions in the path of the
door.
[Keep your fingers away from the
edge of the door or they may become
trapped when the power door latch
operates.
Resetting the power door latch
The power door latch may need to be
reset after the battery is discharged or
disconnected or a related fuse has been
replaced or disconnected.
To reset the power door latch, perform
the following steps:
1. Close the door to the first detent
positon.
2. Open the door.
When this is complete, the power door
latch is reset.
If the power door latch do not operate
properly after resetting, have the vehicle
inspected by an authorized retailer of
Genesis Branded products.

Page 257 of 661

5-63
05
Automatic reverse
ORG3EV051029
If a window senses any obstacle while it
is closing automatically, it will stop and
lower approximately 12 in. (30 cm) to
allow the object to be cleared.
If the window detects the resistance
while the power window switch is
pulled up continuously, the window
will stop upward movement then lower
approximately 1 in. (2.5 cm).
If the power window switch is pulled
up continuously again within 5 seconds
after the window is lowered by the
automatic window reverse feature,
the automatic window reverse will not
operate.
Information
The automatic reverse feature is only
active when the “Auto Up” feature is used
by fully pulling up the switch to the second
detent.
WARNING
Make sure body parts or other objects
are safely out of the way before closing
the windows to avoid injuries or vehicle
damage.
Objects less than 0.16 in. (4 mm) in
diameter caught between the window
glass and the upper window channel
may not be detected by the automatic
reverse window and the window will
not stop and reverse direction.
Power window lock button
ORG3EV051212
The driver can disable the power window
switches on the rear passenger doors by
pressing the power window lock button.
When the power window lock button is
pressed:
[The rear passenger control will not
be able to operate the rear passenger
power window.
[Note that the front passenger control
is still able to operate the front
passenger window, and that the driver
master control can still operate all the
power windows.
WARNING
Do not allow children to play with the
power windows. Keep the driver’s
door power window lock button in the
LOCK position. Serious injury or death
can result from unintentional window
operation by a child.
NOTICE
[To prevent possible damage to the
power window system, do not open
or close two windows or more at the
same time. This will also ensure the
longevity of the fuse.
[Never try to operate the main
switch on the driver’s door and the
individual door window switch in
opposite directions at the same time.
If this is done, the window will stop
and cannot be opened or closed.

Page 268 of 661

5-74
Convenience Features
Resetting the power trunk
In some circumstances resetting the
power trunk operation may need to
be performed. Some instances where
resetting the power trunk may be
required include:
[When the 12-volt battery is recharged
[When the 12-volt battery is reinstalled
after removal or replacement
[When the related fuse is reinstalled
after removal or replacement
1. With the vehicle off or running, put
the gear in P (Park).
2. While Pressing the power trunk close
inner button, press the power trunk
open outer button for more than 3
seconds. A chime will sound.
3. Slowly close the trunk manually.
4. Press the power trunk open outer
button. The trunk will open with a
chime sound. Wait until the trunk
fully opens to complete resetting. If
the trunk stops before it is fully open,
resetting cannot be completed.
Information
If the power trunk does not operate
properly after the above procedure, have
the system inspected by an authorized
retailer Genesis Branded products.
Emergency trunk safety release
[Inside the trunk
ORG3EV051049Your vehicle is equipped with an
emergency trunk safety release lever
located inside the trunk. When someone
is inadvertently locked in the trunk, the
trunk can be opened by moving the lever
in the direction of the arrow and pushing
the trunk lid to open.
[Inside the vehicle
Follow the below procedure to open
the trunk manually when the battery is
discharged or when there is a problem
with the vehicle:
ORG3EV051050N
1. Open the pass through cover M at the
center of the rear seat.
2. Pull trunk release lever the all the way
back that is located behind the left
side of the pass through cover.

Page 317 of 661

5-123
05
Power Outlet
ORG3EV051202
The power outlet is designed to provide
power for mobile telephones or other
devices designed to operate with vehicle
electrical systems. The devices should
draw less than 180 watts with the vehicle
running.
WARNING
Avoid electrical shocks. Do not place
your fingers or foreign objects (pin, etc.)
into a power outlet or touch the power
outlet with a wet hand.
NOTICE
To prevent damage to the power
outlets:
[Use the power outlet only when the
vehicle is running and remove the
accessory plug after use. Using the
accessory plug for prolonged periods
of time with the vehicle off could
cause the battery to discharge.
[Only use 12 volts electric accessories
which are less than 180 watts in
electric capacity.
[Adjust the air-conditioner or heater
to the lowest operating level when
using the power outlet.
[Close the cover when not in use.
[Some electronic devices can
cause electronic interference
when plugged into a vehicle’s
power outlet. These devices may
cause excessive audio static and
malfunctions in other electronic
systems or devices used in your
vehicle.
[Push the plug in as far as it will go. If
good contact is not made, the plug
may overheat and the fuse may open.
[Plug in battery equipped electrical/
electronic devices with reverse
current protection. The current
from the battery may flow into the
vehicle’s electrical/electronic system
and cause system malfunction.

Page 333 of 661

6-7
06
NOTICE
To prevent damage to the vehicle:
Do not press the Start/Stop button for
more than 10 seconds except when the
stop lamp fuse is blown.
When the stop lamp fuse is blown,
you cannot normally start the vehicle.
Replace the fuse with a new one. If you
are not able to replace the fuse, you
can start the vehicle by pressing and
holding the Start/Stop button for 10
seconds with the Start/Stop button in
the ACC position.
Pressing the brake pedal many times
while “
” indicator light is off will
increase the possibility of discharging
the 12V battery.
For your safety always depress the
brake pedal before starting the vehicle.
Information
Virtual Engine Sound System(VESS)
VESS generates virtual engine sound to
make pedestrians to aware. VESS operates
when the vehicle can be driven. When the
vehicle in P(parking) gear status, VESS
doesn't work.
CAUTION
[Because the vehicle doesn't make
the engine sound, pay attention to
the surrounding environment and
drive carefully.
[After parking or waiting for a traffic
light, please check around(children,
obstacle, etc.) before departure.
[When reversing, check directly
behind you before driving.
Pedestrians may not be able to
recognize vehicle sounds.
ORG3EV061007N
If the smart key battery is weak or the
smart key does not work correctly, you
can start the vehicle by placing the smart
key in the smart key slot for emergency
starting. After placing the smart key
in the smart key slot, press the Start/Stop
button.
Turning Off the Vehicle
1. Stop the vehicle and depress the
brake pedal fully.
2. Shift to P (Park).
3. Press the Start/Stop button to the OFF
position and apply the parking brake.
4. Make sure the ‘
’ indicator light
is off in the instrument cluster.
CAUTION
If the "" indicator light on the
instrument cluster is still on, the vehicle
is not turned off and can move when
the gear is in any position except P
(Park).

Page 581 of 661

8-5
08
WARNING
[Keep sparks away from the battery as
the explosive gas is generated by the
sparks while the battery is running.
[When connecting the supplementary
battery and the discharged battery
with a jump cable because the
jump start does not operate with
jump start terminal in the motor
compartment, do not directly
connect the (-) to the jump cable.
Connect the (-) to the one of the
metallic parts located far from the
jump cable in the vehicle. The direct
(-) connection to the jumpcable may
cause an explosion.
[The battery contains dilute sulfuric
acid, which is highly corrosive, so be
careful not to let the battery liquid
get on your body, clothes, or car
body. If dilute sulfuric acid gets on
your body or eyes, immediately rinse
the area with clean water for about
15 minutes and then consult a doctor.
Information
Your vehicle has a battery in the luggage
compartment, but when you jump start
your vehicle, use the jumper terminal in
the motor compartment.
If jump start does not operate with
the jump start terminal in the motor
compartment, use the battery terminal in
the trunk.
Jump starting procedure
Information
Your vehicle has a battery in the luggage
compartment, but when you jump start
your vehicle, use the jumper terminal in
the motor compartment.
1. Position the vehicles close enough
that the jumper cables will reach, but
do not allow the vehicle to touch.
2. Avoid fans or any moving parts in the
motor compartment at all times, even
when the vehicles are turned off.
3. Turn off all electrical devices such as
radios, lights, air conditioning, etc.
Put the vehicles in P (Park) and set the
parking brake. Turn both vehicles OFF.
4. Open the hood.
ORG3EV081010
5. Remove the motor compartment fuse
box cover.
CAUTION
Before jump starting, make sure to
correctly identify the positive (+) and
negative (-) terminals to avoid reverse
polarity connections.

Page:   1-10 11-20 21-30 next >