steering GENESIS G90 2023 Owners Manual

Page 544 of 676

7-155
07
Information
[Check that all smart keys are outside
the vehicle when using Remote
2SHUDWLRQIXQFWLRQ
[5HPRWH2SHUDWLRQIXQFWLRQZLOORSHUDWH
only when the smart key is within
IW P IURPWKHYHKLFOH,IWKHUH
is no vehicle movement even when
the Forward or Backward button is
SUHVVHGRQWKHVPDUWNH\FKHFNWKH
GLVWDQFHWRWKHYHKLFOHDQGSUHVVWKH
button again.
[The detecting range of the smart
NH\PD\YDU\GHSHQGLQJRQWKH
surroundings that are affected by radio
waves such as transmission tower,
broadcast station, etc.
[When remotely moving forward using
PHWKRG  LWLVUHFRJQL]HGDVDQH[LW
VLWXDWLRQDQGWKHYHKLFOHPRYHV
IW P WRFKHFNIRUSDUNLQJOLQHV
SHGHVWULDQVDQLPDOVRUREMHFWVDURXQG
the vehicle. After confirmation, the
steering wheel is controlled according
to the condition ahead.
[When remotely moving forward
using method (2), it is recognized as a
SDUNLQJVLWXDWLRQDQGZLOOLPPHGLDWHO\
control the steering wheel according
to the condition ahead to assist with
HQWHULQJWKHSDUNLQJVSDFHDQGDOLJQLQJ
WKHYHKLFOH+RZHYHUSHUIRUPDQFHPD\
UHGXFHGHSHQGLQJRQWKHSDUNLQJOLQHV
SHGHVWULDQVDQLPDOVVKDSHRIREMHFWV
location, etc., around the vehicle.
[For moving remotely backward, both
PHWKRG  DQG  DOLJQVWKHVWHHULQJ
wheel first, and then will only move the
vehicle straight.
[When remotely moving forward or
EDFNZDUGLVFRPSOHWHGWKHYHKLFOH
ZLOODXWRPDWLFDOO\VKLIWWR3 3DUN 
DQGHQJDJH(3% (OHFWURQLF3DUNLQJ
Brake).
CAUTION
[When using Remote Operation
IXQFWLRQPDNHVXUHWKDWDOO
SDVVHQJHUVKDYHJRWWHQRXWRIWKH
YHKLFOH
[,IWKHYHKLFOHTVEDWWHU\LVGLVFKDUJHG
RU5HPRWH6PDUW3DUNLQJ$VVLVW
malfunctions when parked in a
QDUURZSDUNLQJVSDFH5HPRWH
2SHUDWLRQIXQFWLRQZLOOQRWRSHUDWH
$OZD\VSDUN\RXUYHKLFOHLQDVSDFH
ZLGHHQRXJKIRU\RXWRJHWLQRURXW
RI\RXUYHKLFOH
['HSHQGLQJRQWKHSDUNLQJVSDFH
\RXPD\QRWEHDEOHWRH[LWIURPWKH
VSDFH\RXKDYHHQWHUHGE\XVLQJ
5HPRWH2SHUDWLRQIXQFWLRQ
[$IWHUSDUNLQJWKHVXUURXQGLQJPD\
FKDQJHGXHWRWKHPRYHPHQWRI
VXUURXQGLQJYHKLFOHV,IWKLVRFFXUV
5HPRWH2SHUDWLRQIXQFWLRQPD\QRW
RSHUDWH
[%HIRUHOHDYLQJWKHYHKLFOHFORVH
ZLQGRZVDQGVXQURRIVDQGPDNH
VXUHWKHHQJLQHLVRIIEHIRUHORFNLQJ
WKHGRRUV

Page 546 of 676

7-157
07
7KHIXQFWLRQZLOOSDXVHLQWKHIROORZLQJ
conditions when:
[There is a pedestrian, animal or object
in the direction the vehicle is moving
[The door or trunk is open
[The Forward (
) or Backward ()
button is not continuously pressed
[Simultaneously pressing multiple
buttons on a smart key
[The smart key is not operated within
13 ft. (4 m) from the vehicle
[Button of another smart key is pressed
in addition to the operating smart key
[Blind-Spot Collision-Avoidance
Assist or Rear Cross-Traffic Collision-
Avoidance Assist operates while the
vehicle is being controlled in the
reverse direction.
[The vehicle moves 22 ft. (7 m) while
the smart key is pressed with Remote
Operation function (maximum travel
distance per button press)
When Remote operation function is
paused, the vehicle will stop. If the
condition that made the function to
pause disappears, the function may
operate again.
The function will cancel in the following
conditions when:
[The steering wheel is steered
[The gear is shifted while the vehicle is
moving
[Operating EPB while the vehicle is
moving
[The hood is open
[The brake pedal or accelerator pedal
is depressed when all the doors are
closed
[The smart key is outside the vehicle
when the brake pedal is depressed
while the driver's door is open
[Rapid acceleration occurs
[Vehicle skid occurs
[The wheel is stuck by an obstacle and
cannot move
[Approximately 3 minutes and 50
seconds have past after Remote
Operation function has started to
operate
[The slope of the road exceeds the
operational range
[The function is paused for more than
1 minute
[The total travel distance of the vehicle
has exceeded 45 ft. (14 m) after
Remote Operation function operation
[The steering wheel, gearshift, braking,
and drive controls are not working
properly
[There is a problem with the smart key
or the smart key battery is low
[ABS, TCS or ESC system operates due
to slippery road conditions
[The alarm of the Theft Alarm System
sounds
When Remote Operation function is
canceled, the vehicle will automatically
stop, shift the gear to P (Park) and
engage EPB (Electronic Parking Brake).
The engine will turn off.

Page 550 of 676

7-161
07
6PDUW3DUNLQJ
OJWEV071226L
OJWEV071227L
(1) Press the Parking/View
() button when the vehicle is
stopped by depressing the brake
pedal. When the brake pedal is
released, Remote Smart Parking
Assist will automatically control
the steering wheel, vehicle speed
and gearshift.
(2) While Smart Parking function
is operating, if you do not hold
down the Parking/View button,
the vehicle will stop and function
control will pause. The function
will start operating again when the
Parking/View button is pressed
and held again.(3) When the vehicle reaches the
target parking position, a message
will appear on the infotainment
system screen to inform you that
parking is complete.
(4) If you need to change the vehicle’s
position or location, manually
complete parking your vehicle.
Information
[6PDUW3DUNLQJIXQFWLRQZLOOQRW
RSHUDWHLIWKHGRRULVRSHQRUWKHVHDW
belt is not fastened.
[7KHSDUNLQJORFDWLRQLQGLFDWRULV
GLVSOD\HGRQ6XUURXQG9LHZ0RQLWRU
VFUHHQDQGLVGLVSOD\HGXQWLOWKHYHKLFOH
HQWHUVWKHSDUNLQJVSDFHIRUWKHILUVW
WLPHE\6PDUW3DUNLQJIXQFWLRQ
[9HKLFOHVSHHGFDQEHDGMXVWHGE\
GHSUHVVLQJWKHEUDNHSHGDOZKLOH6PDUW
3DUNLQJIXQFWLRQLVRSHUDWLQJ+RZHYHU
the vehicle does not accelerate
HYHQZKHQWKHDFFHOHUDWRUSHGDOLV
GHSUHVVHG
['HSHQGLQJRQSDUNLQJHQYLURQPHQWV
LIWKHYHKLFOHLVVWRSSHGE\DVWRSSHU
SDUNLQJPD\EHFRPSOHWHG
[If you need to change the vehicle's
SRVLWLRQRUORFDWLRQPDQXDOO\FRPSOHWH
SDUNLQJ\RXUYHKLFOH

Page 551 of 676

7-162
Driver Assistance System
5HPRWH6PDUW3DUNLQJ
ORS071164L
(1) Shift the gear to P (Park), get out
of the vehicle with the smart key,
and close all doors.
(2) Press and hold one of the Forward
(
) or Backward () button on
the smart key. Remote Smart
Parking Assist will automatically
control the steering wheel, vehicle
speed and gearshift.
(3) While Remote Smart Parking
function is operating, if you do
not hold down the Forward (
) or
Backward () button, the vehicle
will stop and function control
will pause. The function will start
operating again when the button is
pressed and held again.
(4) When the vehicle reaches the
target parking position, a message
will appear on the infotainment
system screen to inform you that
parking is complete. The vehicle
will automatically shift to P (Park),
engage EPB (Electronic Parking
Brake) and the engine will turn off.
(5) If you need to change the vehicle’s
position or location, manually
complete parking your vehicle.
Information
[:KHQRSHUDWLQJ5HPRWH6PDUW
3DUNLQJIXQFWLRQPDNHVXUHDOOVPDUW
keys are outside of the vehicle.
[5HPRWH6PDUW3DUNLQJIXQFWLRQZLOO
RSHUDWHRQO\ZKHQWKHVPDUWNH\LV
ZLWKLQIW P IURPWKHYHKLFOH,I
there is no vehicle movement even when
the Remote Forward or Backward
EXWWRQLVSUHVVHGRQWKHVPDUWNH\
check the distance to the vehicle and
SUHVVWKHEXWWRQDJDLQ
[The detecting range of the smart
NH\PD\YDU\GHSHQGLQJRQWKH
surroundings that are affected by radio
waves such as transmission tower,
broadcast station, etc.
[7KHSDUNLQJORFDWLRQLQGLFDWRULV
GLVSOD\HGRQ6XUURXQG9LHZ0RQLWRU
VFUHHQDQGLVGLVSOD\HGXQWLOWKH
YHKLFOHHQWHUVWKHSDUNLQJVSDFHIRUWKH
ILUVWWLPHE\5HPRWH6PDUW3DUNLQJ
function.
['HSHQGLQJRQSDUNLQJHQYLURQPHQWV
LIWKHYHKLFOHLVVWRSSHGE\DVWRSSHU
SDUNLQJPD\EHFRPSOHWHG
CAUTION
[:KHQXVLQJ5HPRWH6PDUW3DUNLQJ
IXQFWLRQPDNHVXUHWKDWDOO
SDVVHQJHUVKDYHJRWWHQRXWRIWKH
YHKLFOH
[After ending or turning off Remote
6PDUW3DUNLQJIXQFWLRQEHIRUH
OHDYLQJWKHYHKLFOHFORVHZLQGRZV
DQGVXQURRIVDQGPDNHVXUHWKH
HQJLQHLVRIIEHIRUHORFNLQJWKH
GRRUV

Page 554 of 676

7-165
07
The function will cancel in the
following conditions when:
[Smart Parking
- The steering wheel is steered
- The gear is shifted while the vehicle
is moving
- Operating EPB while the vehicle is
moving
- The hood is open
- The driver opens the door with the
seatbelt unfastened
- Rapid acceleration occurs
- Vehicle skid occurs
- The wheel is stuck by an obstacle
and cannot move
- There are pedestrians, animals or
objects at the front and rear of the
vehicle at the same time
- Approximately 3 minutes and 50
seconds have past after Smart
Parking function has started to
operate
- The slope of the road exceeds the
operational range
- The function is paused for more
than 1 minute
- The steering wheel, gearshift,
braking, and drive controls are not
working properly
- ABS, TCS or ESC system operates
due to slippery road conditions
When Smart Parking function is
canceled, the vehicle will automatically
stop, shift the gear to P (Park) and
engage EPB (Electronic Parking Brake).[Remote Smart Parking
- The steering wheel is steered
- The gear is shifted
- Operating EPB while the vehicle is
moving
- The hood is open
- The brake pedal or accelerator
pedal is depressed when all the
doors are closed
- The smart key is outside the vehicle
when the brake pedal is depressed
while the driver's door is open.
- Rapid acceleration occurs
- Vehicle skid occurs
- The wheel is stuck by an obstacle
and cannot move
- There are pedestrians, animals or
objects at the front and rear of the
vehicle at the same time
- Approximately 3 minutes and 50
seconds have past after Remote
Smart Parking function has started
to operate
- The slope of the road exceeds the
operational range
- The function is paused for more
than 1 minute
- The steering wheel, gearshift,
braking, and drive controls are not
working properly
- There is a problem with the smart
key or the smart key battery is low
- ABS, TCS or ESC system operates
due to slippery road conditions
- The alarm of the Theft Alarm System
sounds
When Remote Smart Parking function is
canceled, the vehicle will automatically
stop, shift the gear to P (Park) and
engage EPB (Electronic Parking Brake).
The engine will turn off.

Page 556 of 676

7-167
07
6HOHFWH[LWGLUHFWLRQ
ORS071280L
(1) With the vehicle stopped by
depressing the brake pedal, the
infotainment system screen
displays the possible directions for
parallel exit.
(2) Touch the infotainment system
screen or use the central controller
to select the desired exit direction.
CAUTION
[%HIRUHVHOHFWLQJWKH([LW'LUHFWLRQ
WKHGULYHUVKRXOGFKHFNZKHWKHUWKH
VSDFHIRUH[LWLVVXLWDEOH
[,IWKHVHDUFKHGH[LWVSDFHE\5HPRWH
6PDUW3DUNLQJ$VVLVWLVQDUURZRU
XQVXLWDEOH VXUURXQGLQJYHKLFOHVDUH
SDUNHGYHUWLFDOO\HWF GRQRWXVH
WKH6PDUW([LWIXQFWLRQ
6PDUW([LW
ORS071278L
(1) Press the Parking/View
() button when the vehicle is
stopped by depressing the brake
pedal. When the brake pedal is
released, Remote Smart Parking
Assist will automatically control
the steering wheel, vehicle speed
and gearshift.
(2) While Smart Exit function is
operating, if you do not hold
down the Parking/View button,
the vehicle will stop and function
control will pause. The function
will start operating again when the
Parking/View button is pressed
and held again.
(3) When the vehicle reaches the
target exit location, a message will
appear on the infotainment system
screen to inform you that exit is
complete.

Page 558 of 676

7-169
07
+RZWRWXUQRII6PDUWIXQFWLRQZKLOH
RSHUDWLQJ
[Press the Parking/View () button
in the following stage:
- Checking space
- Select exit direction
[Shift the gear to R (Reverse) in the
following stage:
- Checking space
- Select exit direction
[Press the Parking Safety (
) button
or select ‘Cancel’ on the infotainment
system screen to turn off Exit
function.
[While Smart Exit function is operating,
if the vehicle is stopped by depressing
the brake pedal, and the gear is
shifted, Exiting function will turn off.
At this time, EPB (Electronic Parking
Brake) will not be engaged.
The function will cancel in the following
conditions when:
[Smart Exit
- The steering wheel is steered
- The gear is shifted while the vehicle
is moving
- Operating EPB while the vehicle is
moving
- The hood is open
- The driver opens the door with the
seatbelt unfastened
- Rapid acceleration occurs
- Vehicle skid occurs
- The wheel is stuck by an obstacle
and cannot move
- There are pedestrians, animals or
objects at the front and rear of the
vehicle at the same time
- Approximately 3 minutes and 50
seconds have past after Smart Exit
function has started to operate
- The slope of the road exceeds the
operational range
- The function was paused for more
than 1 minute
- The steering wheel, gearshift,
braking, and drive controls are not
working properly
- ABS, TCS or ESC system operates
due to slippery road conditions
When Smart Exit function is canceled,
the vehicle will automatically stop, shift
the gear to P (Park) and engage EPB
(Electronic Parking Brake).

Page 560 of 676

7-171
07
OJWEV071288L
5HPRWH6PDUW3DUNLQJ$VVLVWVWDQGE\
‘Parking Assist Conditions Not Met’
message appears when Parking/View
(
) button has been pressed and held
while Remote Smart Parking Assist is in
standby.
After a while, press and hold the
Parking/View (
) button again to see if
Remote Smart Parking Assist works.
The message appears even when the
smart key's battery is low. Check the
smart key battery level.
Limitations of Remote Smart Parking
Assist
In the following circumstances, Remote
Smart Parking Assist performance to
park or exit the vehicle may be limited,
there may be a risk of collision, or
Remote Smart Parking Assist may turn
off. Park or exit the vehicle manually if
necessary.
[An object is attached to the steering
wheel
[The vehicle is installed with a snow
chain, spare tire or different size
wheel
[Tire pressure is lower or higher than
the standard tire pressure
[Your vehicle is loaded with cargo
longer or wider than your vehicle or a
trailer is connected to your vehicle [There is a problem with the wheel
alignment
[Your vehicle is leaned severely to one
side
[Your vehicle is equipped with a trailer
hitch
[The license plate is installed
differently from the original location
[There is a person, animal or object
above or below the ultrasonic sensor
when Remote Smart Parking Assist is
activated
[The parking space is narrow or curve
[There is an obstacle such as a person,
animal or object (trash can, bicycle,
motorcycle, shopping cart, narrow
pillar, etc.) near the parking space
[There is a circular pillar or narrow
pillar, or a pillar surrounded by objects
such as fire extinguisher, etc., near the
parking space
[The road surface is bumpy (curbstone,
speed bump, etc.)
[The road is slippery
[The parking space is near a vehicle
with higher ground clearance or big,
such as a truck, etc.
[The parking space is Inclined

Page 587 of 676

8-20
Emergency Situations
ORS081006ORS081006
For safe operation, carefully read and
follow the instructions in this manual
before use.
M Compressor
N Sealant bottle
The Tire Mobility Kit is a temporary fix to
the tire and the tire should be inspected
by an authorized retailer of Genesis
Branded products or the equivalent
approved for your vehicle as soon as
possible.
CAUTION
When two or more tires are flat, do not
use the tire mobility kit because the
sealant provided with the Tire Mobility
Kit must be used for only one flat tire.
WARNING
Do not use the Tire Mobility Kit to repair
punctures in the tire walls. This can
result in an accident due to tire failure.
WARNING
Have your tire repaired as soon as
possible. The tire may lose air pressure
at any time after inflating with the Tire
Mobility Kit.
Introduction
With the Tire Mobility Kit you stay mobile
even after experiencing a tire puncture.
The compressor and sealing compound
system effectively and comfortably seals
most punctures in a passenger vehicle
tire caused by nails or similar objects and
reinflates the tire.
After you ensure that the tire is properly
sealed you can drive cautiously on the
tire (distance up to 120 miles (200 km))
at a max. speed of 50 mph (80 km/h) in
order to reach a service station or tire
dealer for the tire replacement.
It is possible that some tires, especially
with larger punctures or damage to the
sidewall, cannot be sealed completely.
Air pressure loss in the tire may adversely
affect tire performance.
For this reason, you should avoid abrupt
steering or other driving maneuvers,
especially if the vehicle is heavily loaded
or if a trailer is in use.
The Tire Mobility Kit is not designed
or intended as a permanent tire repair
method and is to be used for one tire
only.
This instruction shows you step by step
how to temporarily seal the puncture
simply and reliably.
Read the section “Notes on the safe use
of the Tire Mobility Kit”.
WARNING
Do not use the TMK if a tire is severely
damaged by driving run flat or with
insufficient air pressure.
Only punctured areas located within the
tread region of the tire can be sealed
using the TMK.
IF YOU HAVE A FLAT TIRE íWITH TIRE MOBILITY KIT, IF
EQUIPPEDî
008_RS4_HMA.indd 8-202022-04-18  3:48:11

Page 590 of 676

8-23
08
WARNING
Expired sealant
Do not use the Tire sealant after the
sealant has expired (for example, past
the expiration date on the sealant
container). This can increase the risk of
tire failure.
WARNING
Sealant
• Keep out of reach of children.
• Avoid contact with eyes.
• Do not swallow.
Using the Tire Mobility Kit
WARNING
ORS081007ORS081007
Detach the speed restriction label M
from the sealant bottle N, and place
it in a highly visible place inside the
vehicle such as on the steering wheel to
remind the driver not to drive too fast.
CAUTION
If only the tire pressure needs to be
adjusted, refer to “How to Adjust Tire
Pressure” in this chapter. Before using
the Tire Mobility Kit, be fully aware of
the explanation on the sealant.
ORG3EV081022ORG3EV081022
1. Shake the sealant bottle N.
ORS081022ORS081022
2. Connect the filling hose O to the
sealant bottle N in the direction of
A and connect the sealant bottle to
the sealant bottle holder Q in the
direction of
B.
3. Ensure that the compressor is
switched OFF.
008_RS4_HMA.indd 8-232022-04-18  3:48:12

Page:   < prev 1-10 ... 51-60 61-70 71-80 81-90 91-100 101-110 next >