transmission GENESIS G90 2023 Owner's Manual

Page 372 of 676

6-62
Driving Your Vehicle
ECO, COMFORT, SPORT Mode
Features
ECO mode (if equipped)
ECO mode helps improve fuel
efficiency for eco-friendly
driving.
Fuel efficiency varies according
to the driver's driving habit and
road condition.
[When ECO mode is selected, the
ECO indicator will illuminate on the
instrument cluster.
[When ECO mode is activated:
-The acceleration response may be
slightly reduced if the accelerator
pedal is depressed moderately.
-The air conditioner performance
may be limited.
-The shift pattern of the automatic
transmission may change.
-Engine noise may be louder at some
automatic transmission shifts as
down-shift requires pressing down
more on the accelerator.
The above situations are normal
conditions when ECO mode is activated
to help improve fuel efficiency.
COMFORT mode
COMFORT mode provides smooth
driving and comfortable riding.
SPORT mode
SPORT mode provides sporty
but firm riding.
In SPORT mode, the fuel
efficiency may decrease.
[When SPORT mode is selected, the
SPORT indicator will illuminate on the
instrument cluster.
[Whenever the engine is restarted,
the drive mode will revert back to
COMFORT mode. If SPORT mode is
desired, re-select SPORT mode.
[When SPORT mode is activated:
-The engine RPM will tend to remain
raised over a certain length of time
even after releasing the accelerator
-Upshifts are delayed when
accelerating
NOTICE
In the SPORT mode, the fuel efficiency
may decrease.

Page 374 of 676

6-64
Driving Your Vehicle
Limitation of SMART mode
SMART may be limited in following
situations. ECO, COMFORT, SPORT mode
features
[The driver is using the paddle shifter
to manually shift gear. (The system
prioritizes the driver’s manual shifting)
[Smart Cruise Control is activated.
[The transmission oil temperature is
either extremely low or extremely
high.
Information
[When you mildly drive the vehicle
in SMART mode, the driving mode
changes to ECO mode to improve fuel
efficiency. However, the actual fuel
efficiency may differ depending on your
driving situations such as slope angle,
and vehicle speed.
[When you dynamically drive the
vehicle in SMART mode by abruptly
decelerating or sharply curving, the
driving mode changes to SPORT mode.
However, it may adversely affect fuel
economy.
CHAUFFEUR mode
CHAUFFEUR mode controls the
suspension, engine, transmission, and
steering wheel to provide comfort driving
experience to rear seat passengers.
MY DRIVE MODE
MY DRIVE mode will allow the driver to
personalize the setting of the powertrain,
steering wheel, suspension, and AWD.
7RVHW0<'5,9(PRGHJRWRS6HWXS

Page 376 of 676

6-66
Driving Your Vehicle
SPECIAL DRIVING CONDITIONS
Hazardous Driving Conditions
When hazardous driving elements
are encountered such as water, snow,
ice, mud and sand, take the following
precautions:
[Drive cautiously and maintain a longer
braking distance.
[Avoid abrupt braking or steering.
[When your vehicle is stuck in
snow, mud, or sand, use second
gear. Accelerate slowly to avoid
unnecessary wheel spin.
[Put sand, rock salt, tire chains or other
non-slip materials under the wheels to
provide additional traction while the
vehicle becomes stuck in ice, snow,
or mud.
WARNING
Downshifting with an automatic
transmission while driving on slippery
surfaces can cause an accident. The
sudden change in tire speed could
cause the tires to skid. Be careful when
downshifting on slippery surfaces.
Rocking the Vehicle
If it is necessary to rock the vehicle to
free it from snow, sand, or mud, first turn
the steering wheel right and left to clear
the area around your front wheels. Then,
shift back and forth between R (Reverse)
and a forward gear.
Try to avoid spinning the wheels, and do
not race the engine.
To prevent transmission wear, wait until
the wheels stop spinning before shifting
gears. Release the accelerator pedal
while shifting, and press lightly on the
accelerator pedal while the transmission
is in gear. Slowly spinning the wheels in
forward and reverse directions causes a
rocking motion that may free the vehicle.
WARNING
If the vehicle is stuck and excessive
wheel spin occurs, the temperature
in the tires can increase very quickly.
If the tires become damaged, a tire
blow out or tire explosion can occur.
This condition is dangerous - you and
others may be injured. Do not attempt
this procedure if people or objects are
anywhere near the vehicle.
If you attempt to free the vehicle, the
vehicle can overheat quickly, possibly
causing an engine compartment fire or
other damage. Try to avoid spinning the
wheels as much as possible to prevent
overheating of either the tires or the
engine. DO NOT allow the vehicle to
spin the wheels above 35 mph
(56 km/h).

Page 377 of 676

6-67
06
Information
The ESC system must be turned OFF
before rocking the vehicle.
NOTICE
If you are still stuck after rocking the
vehicle a few times, have the vehicle
pulled out by a tow vehicle to avoid
engine overheating, possible damage to
the transmission, and tire damage. See
“Towing” section in chapter 8.
Smooth Cornering
Avoid braking or gear changing in
corners, especially when roads are wet.
Ideally, corners should always be taken
under gentle acceleration.
Driving at Night
Night driving presents more hazards than
driving in the daylight. Here are some
important tips to remember:
[Slow down and keep more distance
between you and other vehicles, as it
may be more difficult to see at night,
especially in areas where there may
not be any street lights.
[Adjust your mirrors to reduce the glare
from other drivers’ headlights.
[Keep your headlights clean and
properly aimed. Dirty or improperly
aimed headlights will make it much
more difficult to see at night.
[Avoid staring directly at the headlights
of oncoming vehicles. You could be
temporarily blinded, and it will take
several seconds for your eyes to
readjust to the darkness.

Page 544 of 676

7-155
07
Information
[Check that all smart keys are outside
the vehicle when using Remote
2SHUDWLRQIXQFWLRQ
[5HPRWH2SHUDWLRQIXQFWLRQZLOORSHUDWH
only when the smart key is within
IW P IURPWKHYHKLFOH,IWKHUH
is no vehicle movement even when
the Forward or Backward button is
SUHVVHGRQWKHVPDUWNH\FKHFNWKH
GLVWDQFHWRWKHYHKLFOHDQGSUHVVWKH
button again.
[The detecting range of the smart
NH\PD\YDU\GHSHQGLQJRQWKH
surroundings that are affected by radio
waves such as transmission tower,
broadcast station, etc.
[When remotely moving forward using
PHWKRG  LWLVUHFRJQL]HGDVDQH[LW
VLWXDWLRQDQGWKHYHKLFOHPRYHV
IW P WRFKHFNIRUSDUNLQJOLQHV
SHGHVWULDQVDQLPDOVRUREMHFWVDURXQG
the vehicle. After confirmation, the
steering wheel is controlled according
to the condition ahead.
[When remotely moving forward
using method (2), it is recognized as a
SDUNLQJVLWXDWLRQDQGZLOOLPPHGLDWHO\
control the steering wheel according
to the condition ahead to assist with
HQWHULQJWKHSDUNLQJVSDFHDQGDOLJQLQJ
WKHYHKLFOH+RZHYHUSHUIRUPDQFHPD\
UHGXFHGHSHQGLQJRQWKHSDUNLQJOLQHV
SHGHVWULDQVDQLPDOVVKDSHRIREMHFWV
location, etc., around the vehicle.
[For moving remotely backward, both
PHWKRG  DQG  DOLJQVWKHVWHHULQJ
wheel first, and then will only move the
vehicle straight.
[When remotely moving forward or
EDFNZDUGLVFRPSOHWHGWKHYHKLFOH
ZLOODXWRPDWLFDOO\VKLIWWR3 3DUN 
DQGHQJDJH(3% (OHFWURQLF3DUNLQJ
Brake).
CAUTION
[When using Remote Operation
IXQFWLRQPDNHVXUHWKDWDOO
SDVVHQJHUVKDYHJRWWHQRXWRIWKH
YHKLFOH
[,IWKHYHKLFOHTVEDWWHU\LVGLVFKDUJHG
RU5HPRWH6PDUW3DUNLQJ$VVLVW
malfunctions when parked in a
QDUURZSDUNLQJVSDFH5HPRWH
2SHUDWLRQIXQFWLRQZLOOQRWRSHUDWH
$OZD\VSDUN\RXUYHKLFOHLQDVSDFH
ZLGHHQRXJKIRU\RXWRJHWLQRURXW
RI\RXUYHKLFOH
['HSHQGLQJRQWKHSDUNLQJVSDFH
\RXPD\QRWEHDEOHWRH[LWIURPWKH
VSDFH\RXKDYHHQWHUHGE\XVLQJ
5HPRWH2SHUDWLRQIXQFWLRQ
[$IWHUSDUNLQJWKHVXUURXQGLQJPD\
FKDQJHGXHWRWKHPRYHPHQWRI
VXUURXQGLQJYHKLFOHV,IWKLVRFFXUV
5HPRWH2SHUDWLRQIXQFWLRQPD\QRW
RSHUDWH
[%HIRUHOHDYLQJWKHYHKLFOHFORVH
ZLQGRZVDQGVXQURRIVDQGPDNH
VXUHWKHHQJLQHLVRIIEHIRUHORFNLQJ
WKHGRRUV

Page 551 of 676

7-162
Driver Assistance System
5HPRWH6PDUW3DUNLQJ
ORS071164L
(1) Shift the gear to P (Park), get out
of the vehicle with the smart key,
and close all doors.
(2) Press and hold one of the Forward
(
) or Backward () button on
the smart key. Remote Smart
Parking Assist will automatically
control the steering wheel, vehicle
speed and gearshift.
(3) While Remote Smart Parking
function is operating, if you do
not hold down the Forward (
) or
Backward () button, the vehicle
will stop and function control
will pause. The function will start
operating again when the button is
pressed and held again.
(4) When the vehicle reaches the
target parking position, a message
will appear on the infotainment
system screen to inform you that
parking is complete. The vehicle
will automatically shift to P (Park),
engage EPB (Electronic Parking
Brake) and the engine will turn off.
(5) If you need to change the vehicle’s
position or location, manually
complete parking your vehicle.
Information
[:KHQRSHUDWLQJ5HPRWH6PDUW
3DUNLQJIXQFWLRQPDNHVXUHDOOVPDUW
keys are outside of the vehicle.
[5HPRWH6PDUW3DUNLQJIXQFWLRQZLOO
RSHUDWHRQO\ZKHQWKHVPDUWNH\LV
ZLWKLQIW P IURPWKHYHKLFOH,I
there is no vehicle movement even when
the Remote Forward or Backward
EXWWRQLVSUHVVHGRQWKHVPDUWNH\
check the distance to the vehicle and
SUHVVWKHEXWWRQDJDLQ
[The detecting range of the smart
NH\PD\YDU\GHSHQGLQJRQWKH
surroundings that are affected by radio
waves such as transmission tower,
broadcast station, etc.
[7KHSDUNLQJORFDWLRQLQGLFDWRULV
GLVSOD\HGRQ6XUURXQG9LHZ0RQLWRU
VFUHHQDQGLVGLVSOD\HGXQWLOWKH
YHKLFOHHQWHUVWKHSDUNLQJVSDFHIRUWKH
ILUVWWLPHE\5HPRWH6PDUW3DUNLQJ
function.
['HSHQGLQJRQSDUNLQJHQYLURQPHQWV
LIWKHYHKLFOHLVVWRSSHGE\DVWRSSHU
SDUNLQJPD\EHFRPSOHWHG
CAUTION
[:KHQXVLQJ5HPRWH6PDUW3DUNLQJ
IXQFWLRQPDNHVXUHWKDWDOO
SDVVHQJHUVKDYHJRWWHQRXWRIWKH
YHKLFOH
[After ending or turning off Remote
6PDUW3DUNLQJIXQFWLRQEHIRUH
OHDYLQJWKHYHKLFOHFORVHZLQGRZV
DQGVXQURRIVDQGPDNHVXUHWKH
HQJLQHLVRIIEHIRUHORFNLQJWKH
GRRUV

Page 561 of 676

7-172
Driver Assistance System
[The road surface of parking space
with lines is wet due to snow, puddles,
or there is a road marker inside the
parking space
[The road surface of the parking space
with lines is bumpy due to road cracks
[The parking line is too thin or thick
[The parking line is partially erased or
blurred
[The parking line is obscured by
people, animals, or objects such as
snow, boxes, etc.
[There is heavy wind
[Operating Remote Smart Parking
Assist on uneven roads, gravel roads,
bushes, etc.
[The performance of the ultrasonic
sensor is affected by extremely hot or
cold weather
[The ultrasonic sensor is covered with
snow or water
[An object that generates ultrasonic
waves is nearby
[A wireless device with a transmission
function operates near the ultrasonic
sensors
[Your vehicle is affected by another
vehicle’s Parking Distance Warning
[The sensor is mounted or positioned
incorrectly by an impact to the
bumper
[The cameras is improperly mounted
or out of position due to side view
mirror damage[The ultrasonic sensor cannot detect
the following objects when:
- Sharp or slim objects, such as ropes,
chains or small poles
- Objects smaller than 40 in. (100 cm)
in length and narrower than 6 in. (14
cm) in diameter
- Objects which tend to absorb
sensor frequency, such as clothes,
spongy material or snow
- A narrow object such as a corner of
a square pillar
- Person, animal or object near the
ultrasonic sensor
[The cameras may not properly
recognize or may not recognize the
parking line and objects when:
- There are small objects (curb, etc.),
sharp objects, or thin objects (rope,
etc.) around
- People, animals or objects are too
close or too far from the vehicle
- Objects are on a higher position,
such as pickup trucks
- The camera is obscured by dirt or
moisture
- The camera is exposed to bright
light
- The surrounding is too dark
- The light is reflected from the
surface

Page 586 of 676

8-19
08
Jack Label
OHYK065011OHYK065011
The actual Jack label in the vehicle may differ from the illustration.
For more detailed specifications, refer to the label attached to the jack.
M Model Name
N Maximum allowable load
O When using the jack, set your parking brake.
P When using the jack, stop the engine.
Q Do not get under a vehicle that is supported by a jack.
R The designated locations under the frame
S When supporting the vehicle, the base plate of jack must be vertical under the lifting
point.
T Shift into Reverse gear on vehicles with manual transmission or shift the gear to the
P position on vehicles with automatic transmission.
U The jack should be used on firm level ground.
V Jack manufacture
Production date
Representative company and address\
008_RS4_HMA.indd 8-192022-04-18  3:48:10

Page 596 of 676

8-29
08
When towing your vehicle in an
emergency without wheel dollies:
1. Release EPB before turning off the
engine.
2. Press the Engine Start/Stop button to
the OFF position.
3. Change the gear to N (Neutral). For
more details, refer to “To stay in N
(Neutral) when vehicle is OFF” section
in chapter 6.
4. Press the Engine Start/Stop button to
the ACC position.
CAUTION
Failure to shift the gear to N (Neutral)
may cause internal damage to the
transmission.
Removable Towing Hook
1. Open the trunk, and remove the
towing hook from the tool case.
ORS081015ORS081015
ORS081016ORS081016
A : Front,
B : Rear
2. Remove the hole cover by pressing
the lower part of the cover on the
bumper.
3. Install the towing hook by turning it
clockwise into the hole until it is fully
secured.
4. Remove the towing hook and install
the cover after use.
008_RS4_HMA.indd 8-292022-04-18  3:48:15

Page 598 of 676

8-31
08
ORS081019LORS081019L
• Use a towing cable or chain less than
16 ft. (5 m) long. Attach a white or red
cloth (about 12 in. (30 cm) wide) in the
middle of the cable or chain for easy
visibility.
• Drive carefully so the towing cable or
chain remains tight during towing.
• Before towing, check the automatic
transmission for fluid leaks under your
vehicle. If the automatic transmission
fluid is leaking, flatbed equipment or a
towing dolly must be used.
NOTICE
Accelerate or decelerate the vehicle
in a slow and gradual manner while
maintaining tension on the tow rope
or chain to start or drive the vehicle,
otherwise tow hooks and the vehicle
may be damaged.
NOTICE
To avoid damage to your vehicle and
vehicle components when towing:
• Always pull straight ahead when
using the towing hooks. Do not pull
from the side or at a vertical angle.
• Do not use the towing hooks to pull
a vehicle out of mud, sand or other
conditions from which the vehicle
cannot be driven out under its own
power.
• Limit the vehicle speed to 10 mph
(15 km/h) and drive less than
1 mile (1.5 km) when towing to avoid
serious damage to the automatic
transmission.
008_RS4_HMA.indd 8-312022-04-18  3:48:16

Page:   < prev 1-10 11-20 21-30 31-40 next >