change time GENESIS G90 2023 Service Manual
Page 484 of 676
7-95
07
: $ 5 1 , 1 *
ORS072095N
S ' U L Y H F D U H I X O O \T Z D U Q L Q J P H V V D J H Z L O O
appear in the following circumstances:
- 1 D Y L J D W L R Q E D V H G 6 P D U W & U X L V H
& R Q W U R O L V Q R W D E O H W R V O R Z G R Z Q \ R X U
Y H K L F O H W R D V D I H V S H H G
Information
[ + L J K Z D \ & X U Y H = R Q H $ X W R 6 O R Z G R Z Q
D Q G + L J K Z D \ 6 H W 6 S H H G $ X W R & K D Q J H
function uses the same
symbol.
[ The images and colors in the
instrument cluster may differ
G H S H Q G L Q J R Q W K H F O X V W H U W \ S H R U W K H P H
selected from the settings menu.
+ L J K Z D \ & X U Y H = R Q H $ X W R 6 O R Z G R Z Q
[ Depending on the curve ahead on the
highway, the vehicle will decelerate,
and after passing the curve, the
vehicle will accelerate to Smart Cruise
Control set speed.
[ Vehicle deceleration time may differ
depending on the vehicle speed
and the degree of the curve on the
road. The higher the driving speed,
deceleration will start faster.
+ L J K Z D \ 6 H W 6 S H H G $ X W R & K D Q J H
[ Highway Set Speed Auto Change
function will operate when Smart
Cruise Control set speed and the
highway speed limit is matched.
[ While Highway Set Speed Auto
Change function is operating, when
the highway, speed limit changes,
Smart Cruise Control set speed
automatically changes to the changed
speed limit.
[ If Smart Cruise Control set speed is
adjusted different from the speed
limit, Highway Set Speed Auto Change
function will be in the standby state.
[ If Highway Set Speed Auto Change
function has changed to the standby
state by driving on a road other than
the highway main road, Highway Set
Speed Auto Change function will
operate again when you drive on the
main road again without setting the
set speed.
[ If Highway Set Speed Auto Change
function has changed to the standby
state by depressing the brake pedal
or pressing the
switch on the
steering wheel, press the switch
to restart the function.
[ Highway Set Speed Auto Change
function does not operate on highway
interchanges or junctions.
Page 485 of 676
7-96
Driver Assistance System
Information
[ + L J K Z D \ 6 H W 6 S H H G $ X W R & K D Q J H
I X Q F W L R Q R Q O \ R S H U D W H V E D V H G R Q W K H
V S H H G O L P L W V R I W K H K L J K Z D \ L W G R H V Q R W
Z R U N Z L W K W K H V S H H G F D P H U D V
[ : K H Q + L J K Z D \ 6 H W 6 S H H G $ X W R & K D Q J H
I X Q F W L R Q L V R S H U D W L Q J W K H Y H K L F O H
automatically accelerates or decelerates
Z K H Q W K H K L J K Z D \ V S H H G O L P L W F K D Q J H V
[ 7 K H P D [ L P X P V H W V S H H G I R U + L J K Z D \
6 H W 6 S H H G $ X W R & K D Q J H I X Q F W L R Q L V
P S K N P K
[ , I W K H V S H H G O L P L W R I D Q H Z U R D G L V Q R W
X S G D W H G L Q W K H Q D Y L J D W L R Q + L J K Z D \ 6 H W
6 S H H G $ X W R & K D Q J H I X Q F W L R Q P D \ Q R W
R S H U D W H S U R S H U O \
[ , I W K H V S H H G X Q L W L V V H W W R D X Q L W R W K H U
W K D Q W K H V S H H G X Q L W X V H G L Q \ R X U
F R X Q W U \ + L J K Z D \ 6 H W 6 S H H G $ X W R
& K D Q J H I X Q F W L R Q P D \ Q R W R S H U D W H
S U R S H U O \
/ L P L W D W L R Q V R I 1 D Y L J D W L R Q % D V H G
Smart Cruise Control
Navigation-based Smart Cruise Control
may not operate properly under the
following circumstances:
[ The navigation is not working properly
[ Map information is not transmitted
due to infotainment system's
abnormal operation
[ Speed limit and road information in
the navigation is not updated
[ The map information and the actual
road is different because of real-time
GPS data or map information error
[ The navigation searches for a route
while driving
[ GPS signals are blocked in areas such
as a tunnel
[ A road that divides into two or more
roads and joins again
[ The driver goes off course the route
set in the navigation
[ The route to the destination is
changed or canceled by resetting the
navigation
[ The vehicle enters a service station or
rest area
[ Android Auto or Car Play is operating
[ The navigation cannot detect the
current vehicle position (for example,
elevated roads including overpass
adjacent to general roads or nearby
roads exist in a parallel way)
[ The navigation is being updated while
driving
[ The navigation is being restarted while
driving
[ The speed limit of some sections
changes according to the road
situations
Page 488 of 676
7-99
07
Information
[ $ W L P H J D S F R X O G R F F X U E H W Z H H Q W K H
navigation’s guidance and when
Navigation-based Smart Cruise Control
R S H U D W L R Q V W D U W V D Q G H Q G V
[ 7 K H V S H H G L Q I R U P D W L R Q R Q W K H F O X V W H U
and navigation may differ.
[ ( Y H Q L I \ R X D U H G U L Y L Q J D W D V S H H G O R Z H U
W K D Q 6 P D U W & U X L V H & R Q W U R O V H W V S H H G
acceleration may be limited by the
curve sections ahead.
[ If Navigation-based Smart Cruise
& R Q W U R O L V R S H U D W L Q J Z K L O H O H D Y L Q J W K H
main road to enter an interchange,
M X Q F W L R Q U H V W D U H D H W F W K H I X Q F W L R Q
P D \ R S H U D W H I R U D F H U W D L Q S H U L R G R I
time.
[ Deceleration by Navigation-based
Smart Cruise Control may feel it is not
sufficient due to road conditions such
as uneven road surfaces, narrow lanes,
etc.
Information
7 K L V G H Y L F H F R P S O L H V Z L W K 3 D U W R I W K H
) & & U X O H V 2 S H U D W L R Q L V V X E M H F W W R W K H
following three conditions:
1. This device may not cause harmful
interference, and
2. 7 K L V G H Y L F H P X V W D F F H S W D Q \
interference received, including
interference that may cause undesired
R S H U D W L R Q
3. & K D Q J H V R U P R G L I L F D W L R Q V Q R W H [ S U H V V O \
D S S U R Y H G E \ W K H S D U W \ U H V S R Q V L E O H
I R U F R P S O L D Q F H F R X O G Y R L G W K H X V H U
Page 498 of 676
7-109
07
ORS071076
Driving to one side within lane
When vehicle speed is above 40 mph (60
km/h), if a detected vehicle around you is
driving at a close distance, your vehicle
will control steering in the opposite
direction of the vehicle to assist in safe
driving. If there a detected vehicle in
both sides of the lane that are driving
close to you, the function will not veer to
the opposite side of the lane.
+ L J K Z D \ ' U L Y L Q J $ V V L V W V W D Q G E \
When Smart Cruise Control is
temporarily canceled while Highway
Driving Assist is operating, Highway
Driving Assist will be in the standby state.
At this time, Lane Following Assist will
operate properly.
Information
[ ' U L Y L Q J 6 S H H G / L P L W K H O S V \ R X G U L Y H
E H O R Z P S K N P K $ W W K L V W L P H
the vehicle decelerates due to the
vehicle ahead. After the vehicle has
decelerated, it cannot automatically
accelerate.
[ ' U L Y L Q J 6 S H H G / L P L W Z L O O F D Q F H O L Q W K H
following circumstances:
-When the driver grabs the steering
wheel again
-When the driver turns on Lane
) R O O R Z L Q J $ V V L V W E \ S U H V V L Q J W K H / D Q H
Driving Assist button
-When +, -,
switch or button is
R S H U D W H G R U W K H D F F H O H U D W R U S H G D O R U
W K H E U D N H S H G D O L V G H S U H V V H G
Highway Lane Change Assist
' L V S O D \ L Q J R S H U D W L Q J V W D W X V
You can see the status of the Highway Lane
Change Assist operation in the Driving
Assist view on the cluster. Refer to “View
Modes” section in chapter 4.
Highway Lane Change Assist function
will be displayed as below depending on
the status of the function.
Page 499 of 676
7-110
Driver Assistance System
ORS072093N
A: Ready/Operating,
B: Standby/Canceled
(1) Highway Lane Change Assist
indicator
[ Green on : Ready state
[ Green blink : Operating state
[ Grey on : Standby state
[ White blink : Canceled state
(display only a certain time)
(2) Green lane line
The lane line is displayed same as
the Highway Lane Change Assist
indicator (1). However, if the function
is on standby, it displays whether the
lane line is detected.
(3) Green arrow and shade
The green arrow is displayed when a
certain amount of time has passed
after the function has started
operating, and until the lane change
has completed.
(4) Message
[ Message is displayed when the
function does not operate even
though the turn signal is used.
[ Message is displayed when
the function is canceled while
operating.
7 R W X U Q R Q + L J K Z D \ / D Q H & K D Q J H $ V V L V W
Highway Lane Change Assist function
will turn on when the following
conditions are satisfied.
[ The Driving Assist button or Lane
Driving Assist button is used to turn
on Highway Driving Assist.
+ L J K Z D \ / D Q H & K D Q J H $ V V L V W U H D G \ W R
R S H U D W H
While Highway Lane Change Assist
function is on, the function will be
ready to operate when all the following
conditions are satisfied:
[ Highway Driving Assist is operating
[ Lane Following Assist is operating
[ A vehicle in the rear area of your
vehicle is detected more than once
after the engine is turned on
[ Your vehicle speed is above 50 mph
(80 km/h)
[ Hands-off warning is not displayed on
the cluster
[ Hazard warning flasher is off
Page 501 of 676
7-112
Driver Assistance System
Information
[ + L J K Z D \ / D Q H & K D Q J H $ V V L V W R S H U D W H V
Z K H Q W K H W X U Q V L J Q D O O H Y H U L V S R V L W L R Q H G
at A. If the turn signal lever is released
to the center M E H I R U H V W H S S L Q J R Q W K H
O D Q H + L J K Z D \ / D Q H & K D Q J H $ V V L V W
cancels. If the turn signal lever is
released to the center M D I W H U V W H S S L Q J
R Q W K H O D Q H + L J K Z D \ / D Q H & K D Q J H
Assist changes the lane and turns off
the turn signal after lane change is
F R P S O H W H
[ : K H Q W K H W X U Q V L J Q D O O H Y H U L V S O D F H G D W
% S R V L W L R Q I R U D F H U W D L Q S H U L R G R I W L P H
W K H J U H H Q D U U R Z Z L O O D S S H D U $ W W K L V
time, even when the lever is released
D Q G U H W X U Q V W R L W
Page 504 of 676
7-115
07
Limitations of Highway Driving
Assist
Highway Driving Assist and Highway
Lane Change function may not operate
properly, or it may not operate under the
following circumstances:
[ The map information and the
actual road is different because the
navigation is not updated
[ The map information and the actual
road is different because of real-time
GPS data or map information error
[ The infotainment system is overloaded
by simultaneously performing
functions such as route search, video
playback, voice recognition, etc.
[ GPS signals are blocked in areas such
as a tunnel
[ The driver goes off course or the
route to the destination is changed or
canceled by resetting the navigation
[ The vehicle enters a service station or
rest area
[ Android Auto or Car Play is operating
[ The navigation cannot detect the
current vehicle position (for example,
elevated roads including overpass
adjacent to general roads or nearby
roads exist in a parallel way)
[ White single dotted lane line or road
edge cannot be detected
[ The road is temporarily controlled due
to construction, etc.
[ There is no structure, such as a
medium strip, guardrails, etc., on the
road
[ There is a changeable lane in the
direction of lane change
[ Rear wheel steering system (if
equipped) is disabled
Information
For more details on the limitations of
the front view camera, front radar, front
corner radar and rear corner radar, refer
to “Forward Collision-Avoidance Assist
) & $
Page 608 of 676
9-10
Maintenance
Normal Maintenance Schedule (Cont.)
MAINTENANCE
INTERVALS
MAINTENANCE
ITEMNumber of months or driving distance, whichever comes first
Months 12 24 36 48 60 72 84 96 108 120 132 144 156
Miles×1,000 8 16 24 32 40 48 56 64 72 80 88 96 104
Km×1,000 13 26 39 52 65 78 91 104 117 130 143 156 169
Automatic transmission fluid
*1
No check, No service required
Front (AWD) / rear differential oil
*2
III
Vapor hose, fuel filler cap and fuel tank IIIIII
Fuel tank air filter IIIIII
Fuel lines, hoses and connections IIIIII
Parking brake IIIIII
Brake fluidInspect every 8,000 miles (13,000 km) or 12 months,
Replace every 48,000 miles (78,000 km) or 48 months
Transfer case oil (AWD) No check, No service required
Air suspension I I I I I I I I I I I I I
I : Inspect and if necessary, adjust, correct, clean or replace.
R : Replace or change.
*1 :
Use only the specified automatic transmission fluid. (Refer to “Recommended lubricants and capacities” section in chapter 2 or
the label in the engine compartment.)
*2 :
Front/rear differential oil should be changed anytime, front/rear differential have been submerged in water. ÃFuel filter is considered to be maintenance free but the quality of fuel used may impact the frequency of maintenance
needed. If there are some important safety matters like fuel flow restriction, surging, loss of power, hard starting
problem, etc. replace the fuel filter immediately regardless of maintenance schedule and consult an authorized retailer
of Genesis Branded products for details.
Page 615 of 676
9-17
09
Checking the Engine Oil and
Filter
[ The lubrication, rust prevention,
cooling, and cleaning effect of the
engine oil will gradually degrade
during its use. Have the engine oil
and filter changed by an authorized
retailer of Genesis Branded
products according to the Oil Life
Management System instructions
or the Maintenance Schedule at the
beginning of this chapter.
[ If the maintenance schedule to
replace engine oil is exceeded,
the engine oil performance may
deteriorate, and the engine condition
may be affected. Therefore, replace
the engine oil according to the
maintenance schedule.
[ To keep the engine in optimal
condition, use the recommended
engine oil and filter. If the
recommended engine oil and filter are
not used, replace it according to the
maintenance schedule under severe
usage conditions.
[ The purpose of the maintenance
schedule for engine oil replacement
is to prevent oil deterioration and it is
irrelevant to oil consumption. Check
and refill engine oil regularly.
Information
When the oil pressure is low due to
insufficient engine oil, the Engine
Oil Pressure (
) warning light will
illuminate. In addition, the enhanced
engine protection system, which limits
the engine's power is activated and the
Malfunction Indicator Lamp (
) will
illuminate when the vehicle is driven in
this state continuously. When oil pressure
is restored, the Engine Oil Pressure
warning light will turn off and the engine
power will no longer be limited.
However, for 3.5 T-GDI and 3.5 T-GDI
48 V MHEV, when the oil pressure is
restored, the warning light and the
enhanced engine protection system will
turn off after the engine is restarted.
CAUTION
The engine oil is very hot
immediately after the vehicle has
been driven and can cause burns
during replacement. Replace the
engine oil after the engine oil has
cooled down.
WARNING
CALIFORNIA PROPOSITION 65
WARNING
Engine oil contains chemicals known to
the State of California to cause cancer,
birth defects and reproductive harm.
Used engine oil may cause irritation or
cancer of the skin if left in contact with
the skin for prolonged periods of time.
Always protect your skin by washing
your hands thoroughly with soap and
warm water as soon as possible after
handling used oil.
Page 673 of 676
9-75
09
Interior wooden trim
[ Use a wooden furniture protector (for
example, wax, coating compound) to
clean the interior wooden trim.
[ Wipe the interior wooden trim with a
lint-free, clean cloth to maintain the
unique wooden textures for a longer
period of time.
[ If you spill beverage (for example,
water, coffee) over the interior
wooden trim, immediately wipe it with
clean, dry cloth.
[ Sharp objects (for example, driver,
knife), adhesive materials, or tapes
may damage the interior wooden trim.
[ Any strong impacts may damage the
interior wooden trim.
[ If the coating finish over the interior
wooden trim is removed, moisture
may damage or change wood traits.
[ If the interior wooden trim is
damaged, you may get a splinter
from the wood surface. Therefore,
you should immediately have the
damaged interior wooden trim
replaced by an authorized retailer of
Genesis Branded products.
Cleaning the seat belt webbing
Clean the belt webbing with any
mild soap solution recommended for
cleaning upholstery or carpet. Follow
the instructions provided with the soap.
Do not bleach or re-dye the webbing
because this may weaken the seat belt.
Cleaning the interior window glass
If the interior glass surfaces of the
vehicle become fogged (that is, covered
with an oily, greasy or waxy film), they
should be cleaned with glass cleaner.
Follow the directions on the glass cleaner
container.
NOTICE
Do not scrape or scratch the inside of
the rear window. This may result in
damage to the rear window defroster
grid.