height GENESIS G90 2023 Owners Manual

2-9
02
Items in. (mm)
Overall length 207.68 (5,275)
Overall width 75.98 (1,930)
Overall height 58.66 (1,490)
TreadTire size Front Rear
245/45 R20 65.16 (1,655) -
275/40 R20 - 65.35 (1,660)
245/40 R21 65.16 (1,655) -
275/35 R21 - 65.35 (1,660)
Wheelbase 125.2 (3,180)
ENGINE
EngineDisplacement
cu. in (cc)Bore x Stroke
in. (mm)Firing order No. of cylinders
3.5L T-GDI 211.8 (3,470)3.6 x 3.4
(92 x 87)1-2-3-4-5-6 6
3.5L T-GDI
48 V MHEV211.8 (3,470)3.6 x 3.4
(92 x 87)1-2-3-4-5-6 6
DIMENSIONS

3-3
03
M Seat sliding forward or rearward
N Seat cushion tilt/Seat height
O Seat cushion extension
P Seatback angle
Q Lumbar support R Seatback bolster
S Head restraint adjustment
T Massage switch
U Walk-in seat switch
V Air ventilation seat
seat warmers
Head restraint

SEATS
The actual shape may differ from the illustration.
ORS031001
Front seat

3-8
Safety System
CAUTION
To prevent injury:

[Do not adjust your seat while
wearing your seat belt. Moving the
seat cushion forward may cause
strong pressure on your abdomen.

[Do not allow your hands or fingers to
get caught in the seat mechanisms
while the seat is moving.
WARNING
NEVER allow children in the vehicle
unattended. The power seats are
operable when the vehicle is turned off.
NOTICE
To prevent damage to the seats:

[Always stop adjusting the seats when
the seat has been adjusted as far
forward or rearward as possible.

[Do not adjust the seats longer than
necessary when the vehicle is turned
off. This may result in unnecessary
battery drain.

[Do not operate two or more seats at
the same time. This may result in an
electrical malfunction.
Forward and rearward adjustment
ORS031004
To move the seat forward or rearward:
1. Push the control switch forward or
rearward.
2. Release the switch once the seat
reaches the desired position.
Seat cushion tilt/height adjustment
ORS031007
Seat cushion tilt M
To change the angle of the front part of
the seat cushion:
Push the front portion of the control
switch up to raise or down to lower the
front part of the seat cushion.
Release the switch once the seat reaches
the desired position.

3-9
03
Seat height N
To change the height of the seat:
Push the rear portion of the control
switch up to raise or down to lower the
height of the seat cushion.
Release the switch once the seat reaches
the desired position.
Seatback angle adjustment
ORS031006
To recline the seatback:
1. Push the control switch forward or
rearward.
2. Release the switch once the seatback
reaches the desired position.Reclining seatback
Sitting in a reclined position when the
vehicle is in motion can be dangerous.
Even when buckled up, the protections
of your restraint system (seat belts and
air bags) is greatly reduced by reclining
your seatback.
WARNING
NEVER ride with a reclined seatback
when the vehicle is moving.
Riding with a reclined seatback
increases your chance of serious or fatal
injuries in the event of a collision or
sudden stop.
Driver and passengers should ALWAYS
sit well back in their seats, properly
belted, and with the seatbacks upright.
Seat belts must be snug against your
hips and chest to work properly. When
the seatback is reclined, the shoulder
belt cannot do its job because it will not
be snug against your chest. Instead,
it will be in front of you. During an
accident, you could be thrown into the
seat belt, causing neck or other injuries.
The more the seatback is reclined,
the greater chance the passenger’s
hips will slide under the lap belt or the
passenger’s neck will strike the shoulder
belt.

3-15
03
Seat sliding, seatback angle and seat
cushion tilt adjustment (if equipped)
ORS031094
ORS032150N
Adjusting seat position and vertical height

[Control switch (Type A)
- Seat position adjustment: Slide the
switch M forward or backward to
adjust seat position.
- Seat height adjustment: Push down
or pull up the switch M to adjust
seat height.

[Armrest touchscreen (Type B)
1. Press
on the left side of
the menu from the armrest
touchscreen.
- Seat adjustment screen is
displayed.
2. Touch the lower part adjustment
button and adjust the seat position
and cushion angle.
Seatback angle

[Control Switch (Type A)
Slide the switch N forward or
backward to adjust seatback angle.

[Armrest touchscreen (Type B)
1. Press
on the left side of
the menu from the armrest
touchscreen.
- Seat adjustment screen is
displayed.
2. Touch the center part adjustment
button and adjust the seatback
angle.
Lumbar support adjustment (if
equipped)
ORS032021N
1. Press on the left side of the menu
from the armrest touchscreen.

[Seat adjustment screen is displayed.
2. Press the adjustment button on the
center of the rear seat to adjust, then
select lumbar support function from
the menu.
3. Touch the arrows to adjust the
position of the lumbar support.

3-24
Safety System
Head Restraint
The vehicle’s front and rear seats
have adjustable head restraints. The
head restraints provide comfort for
passengers, but more importantly they
are designed to help protect passengers
from whiplash and other neck and spinal
injuries during an accident, especially in
a rear impact collision.
WARNING
To reduce the risk of serious injury or
death in an accident, take the following
precautions when adjusting your head
restraints:

[Always properly adjust the head
restraints for all passengers BEFORE
starting the vehicle.

[NEVER let anyone ride in a seat
with the head restraint removed or
reversed.
OHI039190N

[Adjust the head restraints so the
middle of the head restraint is at the
same height as the height of the top
of the eyes.

[NEVER adjust the head restraint
position of the driver’s seat when the
vehicle is in motion.

[Adjust the head restraint as close to
the passenger’s head as possible. Do
not use a seat cushion that holds the
body away from the seatback.

[Make sure the head restraint locks
into position after adjusting it.
WARNING
When sitting on the rear seat, do not
adjust the height of the head restraint
to the lowest position.
CAUTION
When there is no occupant in the rear
seats, adjust the height of the head
restraint to the lowest position. The
rear seat head restraint can reduce the
visibility of the rear area.
NOTICE
To prevent damage, NEVER hit or pull
on the head restraint.

3-25
03
Front seat head restraints
ORS031141L
The driver’s and front passenger’s seats
are equipped with adjustable head
restraints for the passengers safety and
comfort.
ORS031013
Adjusting the height up and down
1. Push the control switch up to raise or
down to lower the head restraint.
2. Release the switch once the head
restraint reaches the desired position.
ORS031012
Forward and rearward adjustment
1. Push the control switch forward
orrearward to move the head restraint.
2. Release the switch once the head
restraint reaches the desired position.
NOTICE
ORS031131
If you recline the seatback towards the
front with the head restraint and seat
cushion raised, the head restraint may
come in contact with the sunvisor or
other parts of the vehicle.

3-26
Safety System
ORS031093
Removal/Reinstall
To remove the head restraint:
1. Recline the seatback O with the
seatback angle switch M.
2. Raise the head restraint as far as it can
go N.
3. Insert a thin-pointed tool into the
head restraint adjustment pole P and
then remove the head restraint Q.
WARNING
NEVER allow anyone to travel in a seat
with the head restraint removed.
ORS031014
To reinstall the head restraint:
1. Recline the seatback.
2. Push the head restraint height control
switch M up as far as it can go.
3. Put the head restraint poles into the
holes N.
4. Adjust the head restraint to the
appropriate height O.
5. Recline the seatback Q using the
seatback angle switch P.
WARNING
Always make sure the head restraint
locks into position after reinstalling and
adjusting it properly.

3-28
Safety System
WARNING
Do not remove the head restraint.
Removing the head restraint on your
own might damage the adjustment
motor connector. Have your vehicle
inspected by an authorized retailer
Genesis Branded products.

[Adjusting the height up and down N
- Adjustment switch (Type A)
Push down or pull up the head
restraint adjustment switch to
adjust the head restraint up and
down.
- Armrest touchscreen (Type B)
1. Press
from the left side menu
on the armrest touchscreen.
- Seat adjustment screen is
displayed.
2. Press the adjustment button on
the upper part of the seat you
want to adjust from the armrest
touchscreen, and then adjust the
head restraint up and down.
Wing-out head restraint adjustment
(if equipped)
ORS031036
While driving, the wing-out head
restraint supports the passenger’s head
from shaking. Hold both ends of the
wing-out head restraint with your hands,
and pull out or push in to adjust its
position.
Information
When the wing-out head restraint is not in
use, hold both ends of the head restraint
and pull out to return it to its original
position.

3-31
03
Pre-active Safety Seat (PSS) (if
equipped)
When Pre-active Safety Seat detects
a collision or hazardous situation, it
provides safety by repositioning the seat
as follows:

[Seatback (power passenger seat and
rear seat): Raises the seatback when
reclined.

[Seat cushion (power rear seat): If
the cushion height is low, raises the
cushion.
WARNING
Pre-active Safety Seat is a
supplementary device. The driver
should keep their eyes on the road and
verify that there are no obstructions
ahead. If there are no passengers or the
seatbelts are not fastened, the system
will not function.
System operation

[Pre-active Safety Seat limits
passenger’s movement and helps
decrease the chance of injury by
raising the seatback right before
collision to tighten the seatbelt.
The system may operate under the
following situations:
- The brake pedal was depressed
abruptly.
- The vehicle is difficult to control.
- Collision risk is considered high by
the vehicle distance sensor.
[Pre-active Safety Seat helps prevent
the passenger from leaning forward
or to the side by raising the seatback
during sudden braking or rapid
turning to tighten the seatbelt.
The system may operate under the
following situations:
- The upper body is leaned forward
due to sudden braking.
- The upper body is leaned to the side
due to rapid turning.
- Driving on a slippery icy road.
- There is high risk of a rollover.
System pause
If the passenger adjusts the seat
manually, the system stops immediately.
However, it restarts to operate after 5
seconds when the hazardous situation
continues.
System malfunction
If the Pre-active Safety Seat system does
not operate properly, have the vehicle
inspected by an authorized retailer of
Genesis Branded products.