headlamp GENESIS GV60 2023 User Guide

Page 289 of 690

5-98
Convenience Features
High Beam Assist Operation
Display and control
[After selecting ‘High Beam Assist
(or HBA (High Beam Assist))’ in the
Settings menu, High Beam Assist will
operate by following the procedure
below.
- Place the headlamp switch in
the AUTO position and push
the headlamp lever towards the
instrument cluster. The High Beam
Assist (
) indicator light will
illuminate on the cluster and High
Beam Assist will be enabled.
- When High Beam Assist is enabled,
high beam will turn on when vehicle
speed is above 25 mph (40 km/h).
When vehicle speed is below 15
mph (25 km/h), high beam will turn
off.
- The High Beam (
) indicator light
will illuminate on the cluster when
high beam is on.
[When High Beam Assist is operating, if
the headlamp lever or switch is used,
High Beam Assist operates as follow:
- If the headlamp lever is pulled
towards you when the high beam
is off, the high beam will turn
on without High Beam Assist
cancelled. When you let go of the
headlamp lever, the lever will move
to the middle and the high beam
will turn off.
- If the headlamp lever is pulled
towards you when the high beam is
on by High Beam Assist, low beam
will turn on and the High Beam
Assist will turn off.
- If the headlamp switch is placed
from AUTO to another position
(headlamp/position/off), High
Beam Assist will turn off and the
corresponding lamp will turn on.[When High Beam Assist is operating,
high beam switches to low beam if
any of the following conditions occur:
- When the headlamp of an
oncoming vehicle is detected.
- When the tail lamp of a vehicle in
front is detected.
- When the headlamp or tail lamp of a
motorcycle or a bicycle is detected.
- When the surrounding ambient light
is bright enough that high beams
are not required.
- When streetlights or other lights are
detected.
Information
The images and colors in the cluster may
differ depending on the cluster type or
theme selected from the cluster.

Page 290 of 690

5-99
05
High Beam Assist Malfunction
and Limitations
High Beam Assist malfunction
OJWEV051094L
When High Beam Assist is not working
properly, the ‘Check High Beam Assist
(HBA) system’ or ‘Check HBA (High
Beam Assist system’ warning message
will appear and
warning light will
illuminate on the cluster. Have the
vehicle be inspected by an authorized
retailer of Genesis Branded products.
Limitations of High Beam Assist
[Light from an oncoming or front
vehicle is not detected because of
lamp damage, or because it is hidden
from sight, etc.
[Headlamp of an oncoming or front
vehicle is covered with dust, snow or
water.
[There is a lamp that has a similar
shape as a vehicle’s lamp.
[Headlamps have been damaged or
not repaired properly.
[Headlamps are not aimed properly.
[Driving on a narrow-curved road,
curved road, rough road, uphill or
downhill. [Vehicle in front is partially visible on a
crossroad or curved road.
[There is a traffic light, reflecting sign,
flashing sign or mirror ahead.
[There is a temporary reflector or flash
ahead (construction area).
[The road conditions are bad such as
being wet, iced or covered with snow.
[A vehicle suddenly appears from a
curve.
[The vehicle is tilted from a flat tire or
is being towed.
[Light from an oncoming or front
vehicle is not detected due to
obstacles in the air such as exhaust
fume, smoke, fog, snow, or water spay
or blizzard on the road, or fogging in
the lamp, etc.
Information
For more details on the limitations of the
)URQW9LHZ&DPHUDUHIHUWR

Page 396 of 690

6-62
Driving Your Vehicle
NOTICE
If you are still stuck after rocking the
vehicle a few times, have the vehicle
pulled out by a tow vehicle to avoid
motor overheating, possible damage
to the reduction gear, and tire damage.
See “Towing” section in chapter 8.
Smooth Cornering
Avoid braking or gear changing in
corners, especially when roads are wet.
Ideally, corners should always be taken
under gentle acceleration.
Driving at Night
Night driving presents more hazards than
driving in the daylight. Here are some
important tips to remember:
[Slow down and keep more distance
between you and other vehicles, as it
may be more difficult to see at night,
especially in areas where there may
not be any street lights.
[Adjust your mirrors to reduce the glare
from other drivers’ headlamps.
[Keep your headlamps clean and
properly aimed. Dirty or improperly
aimed headlamps will make it much
more difficult to see at night.
[Avoid staring directly at the
headlamps of oncoming vehicles. You
could be temporarily blinded, and it
will take several seconds for your eyes
to readjust to the darkness.
Driving in the Rain
Rain and wet roads can make driving
dangerous. Here are a few things to
consider when driving in the rain or on
slick pavement:
[Slow down and allow extra following
distance. A heavy rainfall makes
it harder to see and increases the
distance needed to stop your vehicle.
[Turn OFF your Smart Cruise Control
(SCC). (if equipped)
[Replace your windshield wiper blades
when they show signs of streaking or
missing areas on the windshield.
[Be sure your tires have enough tread.
If your tires do not have enough tread,
making a quick stop on wet pavement
can cause a skid and possibly lead to
an accident. See “Tire Tread” section
in chapter 9.
[Turn on your headlamps to make it
easier for others to see you.
[Driving too fast through large puddles
can affect your brakes. If you must go
through puddles, try to drive through
them slowly.
[If you believe your brakes may be wet,
apply them lightly while driving until
normal braking operation returns.

Page 433 of 690

7-19
07
:$51,1*
[(YHQWKRXJKWKHZDUQLQJPHVVDJHRU
warning light does not appear on the
FOXVWHU)RUZDUG&ROOLVLRQ$YRLGDQFH
$VVLVWPD\QRWSURSHUO\RSHUDWH
[)RUZDUG&ROOLVLRQ$YRLGDQFH$VVLVW
PD\QRWSURSHUO\RSHUDWHLQDQDUHD
IRUH[DPSOHRSHQWHUUDLQ ZKHUH
DQ\REMHFWVDUHQRWGHWHFWHGDIWHU
WXUQLQJ21WKHYHKLFOH
Limitations of Forward Collision-
Avoidance Assist
Forward Collision-Avoidance Assist may
not operate properly, or it may operate
unexpectedly under the following
circumstances:
[The detecting sensor or the
surroundings are contaminated or
damaged
[The temperature around the front
view camera is high or low due to
surrounding environment
[The camera lens is contaminated due
to tinted, filmed or coated windshield,
damaged glass, or sticky foreign
material (sticker, bug, etc.) on the
glass
[Moisture is not removed or frozen on
the windshield
[Washer fluid is continuously sprayed,
or the wiper is on
[Driving in heavy rain or snow, or thick
fog
[The field of view of the front view
camera is obstructed by sun glare
[Street light or light from an oncoming
traffic is reflected on the wet road
surface, such as a puddle on the road
[An object is placed on the dashboard[Your vehicle is being towed
[The surrounding is very bright
[The surrounding is very dark, such as
in a tunnel, etc.
[The brightness changes suddenly, for
example when entering or exiting a
tunnel
[The brightness outside is low, and the
headlamps are not on or are not bright
[Driving through steam, smoke or
shadow
[Only part of the vehicle, pedestrian or
cyclist is detected
[The vehicle in front is a bus, heavy
truck, truck with an unusually shaped
cargo, trailer, etc.
[The vehicle in front has no tail lights,
tail lights are located unusually, etc.
[The brightness outside is low, and the
tail lamps are not on or are not bright
[The rear of the front vehicle is small
or the vehicle does not look normal,
such as when the vehicle is tilted,
overturned, or the side of the vehicle
is visble, etc.
[The front vehicle’s ground clearance is
low or high
[A vehicle, pedestrian or cyclist
suddenly cuts in front
[The bumper around the front radar is
impacted, damaged or the front radar
is out of position
[The temperature around the front
radar is high or low
[Driving through a tunnel or iron bridge
[Driving in vast areas where there
are few vehicles or structures (for
example, desert, meadow, suburb,
etc.)
[Driving near areas containing metal
substances, such as a construction
zone, railroad, etc.

Page 475 of 690

7-61
07
Limitations of Intelligent Speed
Limit Assist
Intelligent Speed Limit Assist may not
operate properly, or it may operate
unexpectedly under the following
circumstances:
[The road sign is contaminated or
indistinguishable
- The road sign is difficult to see due
to bad weather, such as rain, snow,
fog, etc.
- The road sign is not clear or
damaged
- The road sign is partially obscured
by surrounding objects or shadow
- A road sign near the road you are
driving is detected
[The road signs do not conform to the
standards below:
- The text or picture on the road sign
is different from the standard
- The road sign is installed between
the main line and the exit road or
between diverging roads
- There is no conditional road signs
on the road sign located on the exit
road
- A sign is attached to another vehicle
[The distance between the vehicle and
the road signs is too far
[The vehicle encounters illuminant
road signs
[Intelligent Speed Limit Assist
incorrectly recognizes numbers or
pictures in the street signs or other
signs as the speed limit
[A road sign near the road you are
driving is detected
[Multiple signs are installed close
together
[The minimum speed limit sign is
misrecognize
[The minimum speed limit sign is on
the road[The brightness changes suddenly, for
example when entering or exiting a
tunnel or passing under a bridge
[Headlamps are not used or the
brightness of the headlamps are weak
at night or in the tunnel
[Road signs are difficult to recognize
due to the reflection of sunlight, street
lights, or oncoming vehicles
[The navigation information or GPS
information contain errors.
[The driver does not follow the guide
of the navigation.
[The driver is driving a new road that is
not in the navigation system yet.
[The field of view of the front view
camera is obstructed by sun glare
[Driving on a road that is sharply
curved or continuously curved
[Driving through speed bumps, or
driving up and down or left to right on
steep inclines
[The vehicle is shaking heavily
[Driving on a newly opened road
:$51,1*
[Intelligent Speed Limit Assist is a
supplemental function that helps the
GULYHUWRFRPSO\ZLWKWKHVSHHGOLPLW
RQWKHURDGDQGPD\QRWGLVSOD\WKH
correct speed limit or control the
GULYLQJVSHHGSURSHUO\
[$OZD\VVHWWKHYHKLFOHVSHHGWRWKH
VSHHGOLPLWLQ\RXUFRXQWU\
[,QWHOOLJHQW6SHHG/LPLW$VVLVWPD\
QRWRSHUDWHIRUVHFRQGVDIWHUWKH
YHKLFOHLVVWDUWHGRUWKHIURQWYLHZ
FDPHUDLVLQLWLDOL]HG
Information
For more details on the limitations of the
front view camera, refer to “Forward
Collision-Avoidance Assist (FCA)” section
in this chapter.

Page 497 of 690

7-83
07
Smart Cruise Control disabled
OTM070115N
When the front radar cover or sensor
is covered with snow, rain, or foreign
material, it can reduce the detecting
performance and temporarily limit or
disable Smart Cruise Control.
If this occurs the ‘Smart Cruise Control
disabled. Radar blocked’ warning
message will appear for a certain period
of time on the cluster.
Smart Cruise Control will operate properly
when snow, rain or foreign material is
removed.
:$51,1*
(YHQWKRXJKWKHZDUQLQJPHVVDJHGRHV
QRWDSSHDURQWKHFOXVWHU6PDUW&UXLVH
&RQWUROPD\QRWSURSHUO\RSHUDWH
CAUTION
6PDUW&UXLVH&RQWUROPD\QRWSURSHUO\
RSHUDWHLQDQDUHD IRUH[DPSOHRSHQ
WHUUDLQ ZKHUHDQ\REMHFWVDUHQRW
GHWHFWHGDIWHUWXUQLQJ21WKHYHKLFOH
Limitations of Smart Cruise Control
Smart Cruise Control may not operate
properly, or it may operate unexpectedly
under the following circumstances:
[The detecting sensor or the
surroundings are contaminated or
damaged
[Washer fluid is continuously sprayed,
or the wiper is on
[The camera lens is contaminated due
to tinted, filmed or coated windshield,
damaged glass, or sticky foreign
material (sticker, bug, etc.) on the
glass
[Moisture is not removed or frozen on
the windshield
[The field of view of the front view
camera is obstructed by sun glare
[Street light or light from an oncoming
vehicle is reflected on the wet road
surface, such as a puddle on the road
[The temperature around the front
view camera is high or low
[An object is placed on the dashboard
[The surrounding is very bright
[The surrounding is very dark, such as
in a tunnel, etc.
[The brightness changes suddenly, for
example when entering or exiting a
tunnel
[The brightness outside is low, and the
headlamps are not on or are not bright
[Driving in heavy rain or snow, or thick
fog
[Driving through steam, smoke or
shadow

Page 629 of 690

9
Tire Sidewall Labeling ................................................................................................ 9-27
Tire Terminology and Definitions ............................................................................. 9-30
All Season Tires ...........................................................................................................9-34
Summer Tires .............................................................................................................9-34
Snow Tires...................................................................................................................9-34
Radial-Ply Tires ...........................................................................................................9-34
Low Aspect Ratio Tires ...............................................................................................9-35
Fuses ................................................................................................................ 9-36
Instrument Panel Fuse Replacement ........................................................................ 9-37
Motor Compartment Panel Fuse Replacement ...................................................... 9-38
Fuse/Relay Panel Description....................................................................................9-39
Light Bulbs .......................................................................................................9-49Headlamp, Parking Lamp, Turn Signal Lamp, Daytime Running Light (DRL)
Replacement ............................................................................................................. 9-50
Puddle Lamp Replacement ....................................................................................... 9-51
Rear Combination Lamp Replacement .................................................................... 9-51
High Mounted Stop Lamp Replacement ..................................................................9-52
License Plate Lamp Replacement .............................................................................9-52
Front Trunk Lamp Replacement ................................................................................9-53
Interior Light Replacement ........................................................................................9-53
Appearance Care ............................................................................................ 9-55Exterior Care ...............................................................................................................9-55
Interior Care ............................................................................................................... 9-60
California Perchlorate Notice ......................................................................... 9-63

Page 633 of 690

9-6
Maintenance
Owner Maintenance Schedule
When you stop for charging:
[Check the coolant level in the coolant
reservoir.
[Check the windshield washer fluid
level.
[Check for low or under-inflated tires.
WARNING
Be careful when checking
your coolant level if the motor
compartment is hot. This
may result in coolant being
blown out of the opening and
cause serious burns and other
injuries.
While operating your vehicle:
[Check for vibrations in the steering
wheel. Notice if there is any increased
steering effort or looseness in the
steering wheel, or change in its
straight-ahead position.
[Notice if your vehicle constantly turns
slightly or “pulls” to one side when
traveling on smooth, level road.
[When stopping, listen and check for
unusual sounds, pulling to one side,
increased brake pedal travel or “hard-
to-push” brake pedal.
[Check the shift gear P (Park) function.
[Check the parking brake.
[Check for fluid leaks under your
vehicle (water dripping from the air
conditioning system during or after
use is normal).
At least monthly:
[Check coolant level in the coolant
reservoir.
[Check the operation of all exterior
lights, including the stoplights, turn
signals and hazard warning flashers.
[Check the inflation pressures of all
tires including the spare (if equipped)
for tires that are worn, show uneven
wear, or are damaged.
[Check for loose wheel bolts.
At least twice a year: (for example,
every Spring and Autumn)
[Check radiator, heater and air
conditioning hoses for leaks or
damage.
[Check windshield washer spray and
wiper operation. Clean wiper blades
with a clean cloth dampened with
washer fluid.
[Check headlamp alignment.
[Check the seat belts for wear and
function.
At least once a year:
[Clean body and door drain holes.
[Lubricate door hinges and hood
hinges.
[Lubricate door and hood locks and
latches.
[Lubricate door rubber weather strips.
[Check the air conditioning system.
[Inspect and lubricate shift gear
linkage and controls.
[Clean the battery (12V) and terminals.
[Check the brake fluid level.

Page 664 of 690

9-37
09
Instrument Panel Fuse
Replacement
„Driver’s side
OJWEV091012
1. Turn the vehicle off.
2. Turn all other switches off.
3. Open the fuse panel cover.
4. Refer to the label on the inside of
the fuse panel cover to locate the
suspected fuse location.
OJWEV091007
5. Pull the suspected fuse straight out.
Use the removal tool (1) provided in
the motor compartment fuses panel
cover.6. Check the removed fuse; replace it if
it is blown. Spare fuses are provided in
the instrument panel fuse panels (or in
the motor compartment fuse panel).
7. Push in a new fuse of the same
rating, and make sure it fits tightly in
the clips. If it fits loosely, consult an
authorized retailer of Genesis Branded
products.
In an emergency, if you do not have
a spare fuse, use a fuse of the same
rating from a circuit you may not need
for operating the vehicle, such as the
cigarette lighter fuse.
If the headlamps or other electrical
components do not work and the fuses
are undamaged, check the fuse panel
in the motor compartment. If a fuse is
blown, it must be replaced with the same
rating.

Page 676 of 690

9-49
09
Consult an authorized retailer of
Genesis Branded products to replace
most vehicle light bulbs. It is difficult
to replace vehicle light bulbs because
other parts of the vehicle must be
removed before you can get to the bulb.
This is especially true for removing the
headlamp assembly to get to the bulb(s).
Removing/installing the headlamp
assembly can result in damage to the
vehicle.
NOTICE
To prevent damage, do not clean the
headlamp lens with chemical solvents
or strong detergents.
Information - Headlamp
desiccant
This vehicle is equipped with desiccant to
reduce fogging inside the headlamp due
to moisture. The desiccant is consumable
and its performance may change based on
the used period or environment. If fogging
inside the headlamp due to moisture
continues for a long time, consult an
authorized retailer of Genesis Branded
products.
Information
The headlamp and tail lamp lenses could
appear frosty if the vehicle is washed after
driving or the vehicle is driven at night in
wet weather. This condition is caused by
temperature difference between the lamp
inside and outside and, it does not indicate
a problem with your vehicle. When
moisture condenses in the lamp, it will be
removed after driving with the headlamp
on. The removable level may differ
depending on lamp size, lamp position
and environmental condition. However, if
moisture is not removed, have the vehicle
inspected by an authorized retailer of
Genesis Branded products.
LIGHT BULBS

Page:   < prev 1-10 11-20 21-30 next >