audio GMC ENVOY 2002 Owner's Guide

3-47 Stereo RCA Jacks
The RCA jacks and the mini-headphone jacks are
located behind the video screen on the overhead console.
The RCA jacks allow you to hook up an auxiliary device
such as a camcorder or a video game unit. The yellow
RCA jack is used for video and the red and white RCA
jacks are used for audio. You may require adapter
connectors or cables to connect your auxiliary device to
the RCA jacks. Refer to the manufacturer's instructions
for proper usage. The mini
-headphone jacks allow you
to hook up customer provided wired headphones.
To use the auxiliary audio and video inputs on the RSE,
connect an external auxiliary device such as a camcorder
to the RCA jacks and turn on both the auxiliary device
power and the power on the front of the RSE player.
If a disc is not present in the player, the auxiliary signal
will immediately be displayed on the RSE. If a disc is
present when the RSE power is turned on, the player will
automatically begin playing the disc and the user will need
to press the AUX button on the remote control to display
and/or hear the auxiliary input signals. Each successive
press of the AUX button on the remote control will switch
the system between disc and auxiliary input. The wired
headphone volume control will only operate when the
DVD player power is turned on and it controls both wired
headphone jacks at the same time. See ªRemote Controlº
later in this section for more information.
Audio Speakers
Audio from the DVD player can only be heard either
through the IR headphones or wired headphones
(not included). The sound will not come through the
vehicle's speakers.
Video Screen
The video screen is located in the overhead console.

3-49
The entertainment system is only compatible with
Region 1 DVDs authorized for use in the United States,
Canada, Puerto Rico, Bermuda, the Virgin Islands
and some islands in the Pacific. On some DVD jackets,
you will see the region displayed. Regular audio CDs
can also be played by the DVD player. The video
screen will default to off when an audio CD is played.
Home recorded CDs (CDRs) will not play in this
DVD player. Try the audio system's CD player instead.
If an error message appears on the front instrument
panel display, see ªDVD Messagesº later in this section.
DVD Player Buttons
(Power): Press this button to turn the DVD
player on.
(Headphone Volume): Press the minus (±)
symbol to decrease headphone volume. Press the
plus (+) symbol to increase headphone volume.
(Play/Pause): Press this button to start play.
Press this button while a DVD is playing to pause it.
Press it again to continue playing the DVD.
(Stop/Eject): Press this button to stop playing,
rewinding or fast forwarding. Press the button a second
time to eject the disc.Playing a Disc
To play a disc, gently insert the disc (with the label
side up) into the loading slot. The DVD player
will continue loading the disc and the player will
automatically start.
If a disc is already in the player, press the play/pause
button on the face of the player or on the remote control.
Some DVDs will not allow you to fast forward or
skip the copyright or previews. Some DVDs will begin
playing after the previews have finished. If the DVD does
not begin playing, refer to the on
-screen instructions.
Stopping and Resuming Playback
To stop a disc, press and release the stop/eject button
on the DVD player or the stop button on the remote.
To resume playback, press the play/pause button on the
DVD player or the remote. As long as the disc has not
been ejected and the stop button has not been pressed
twice on the remote control, the movie should resume
play from where it was last stopped. If the disc has been
ejected, or if the stop button on the remote has been
pressed twice, the disc will resume play at the beginning.

3-50
Parental Control Button: This button is located on the
front of the DVD console which is mounted vertically
above the driver's right shoulder. Press this button while
a DVD is playing to freeze the video and mute the audio
to the headphones. It will also disable all other button
operations from the remote and DVD player. The driver
will then be able to gain the attention of the rear seat
passengers. Press this button again to restore normal
play of the DVD.
Ejecting a Disc
Press the stop/eject button on the DVD player once to
stop and a second time to eject the disc.
If a disc is ejected from the player, but not removed,
the DVD player will reload the disc after approximately
10 to 20 seconds.DVD Messages
The following errors may be displayed:

Disc Format Error: This message will be displayed
if a disc is inserted upside down, if the disc is not
able to be read or if the disc format is not compatible.
This message will also be displayed for un
-supported
formats such as CD
-RW s .

Disc Play Error: This message will be displayed
if the mechanism can not play the disc. Severely
scratched discs will cause this error.

Region Code Error: This message will be displayed
for all non Region 1 discs (DVDs sold outside of
North America).

Load/Eject Error: This message will be displayed
if the disc is not properly lined up in the mechanism.

Disc Not Present: This message will be displayed if
the PLAY, EJECT or DVD AUX buttons are pressed
and no disc is in the player.

3-53
COMP/AUDIO (COMP) Compression: Press and
release this button to display the current compression
displayed on the screen. Press this button again to
select the next compression state. Three compression
states are available including minimum, standard and
off. The compression feature only functions on AC3
(Dolby Digital) encoded DVD video discs.
Press and hold this button to see if the DVD playing
has optional audio tracks, such as different languages
or commentaries. Press and release to change selections.
INPUT/TITLE DVD AUX (Auxiliary): Press and
release this button to switch between the auxiliary input
device and the DVD player.
Press and hold this button to see a display of the DVD's
titles. Press and release to change the titles available.
RTN (Return): When a DVD menu is active and
the return button is pressed, the selected option will be
disabled. This button could have different functions with
different discs.
SCREEN BRIGHTNESS: Press the plus or
minus symbol to increase or decrease the brightness
of the screen. This button can also be found above the
video screen.
LIGHT: Press this button to illuminate the keypad
for about eight seconds.Setup Menu
To access the setup menu, ensure a DVD disc is in the
player and the video is in stop mode. Press the menu key.
Once the menu is activated, use the UP, DOWN, RIGHT,
LEFT, and Enter buttons to navigate the screen.
The setup menu allows the user to select default preferences
for Menu Language, Subtitle Language, Audio Language,
TV Aspect, TV Mode, and Dynamic Range Compression.
Not all DVDs support all the feature defaults in the
setup menus. In the event a particular feature is not
supported, defaults will be provided by the DVD media.
Exit the setup menu by pressing the RETURN button
on the remote control. If you make changes to the
system setup defaults, the disc will resume play from
it's beginning and not where it previously left off.
Battery Replacement
To change the batteries, do the following:
1. Unclip the battery door located on the back of
the remote control.
2. Remove the batteries from the compartment.
3. Replace the two AA batteries. Make sure that
they are installed correctly.
If the remote control is to be stored for a long period
of time, remove the batteries and keep them in a cool,
dry place.

3-55
ProblemRecommended Action
The language
in the audio or
on the screen
is wrong.Press and hold the COMP/AUDIO
button on the remote. This will
access the DVD's main menu.
Go to the system menu and check
the default settings for menu
language, subtitle language
and audio language.
The remote does
not work.Point the remote directly at
the player, but not too close
to the screen.
The batteries could be dead or
put in wrong.
If the power button on the player
is flashing, the parental control
is on, which disables the remote.
I can not
hear anything
when I lower
the volume.Quickly press and release the
COMP/AUDIO button on the
remote. This tells you the current
default setting. Press and release
the COMP/AUDIO button again
to choose another setting.
ProblemRecommended Action
How do I get
subtitles on
or off?Press and hold the DISP/S-TITLE
button on the remote to go to the
DVD's main menu. Then follow
the prompts.
After stopping
the player,
I push PLAY
but sometimes
the DVD starts
where I left off
and sometimes
at the beginning.Press the STOP button on the
remote to resume where the
DVD left off.
Press the STOP button twice to
start the DVD at the beginning.
If the power is off and the
DVD is still in the player,
press the PLAY button.
The DVD is
playing but
there is no
picture or sound.
The auxiliary
medium (video
game, camcorder,
etc.) is running
but there is no
picture or sound.Press the INPUT/TITLE
button on the remote to get
to auxiliary input.
The auxiliary medium's cords
could be plugged into the
wrong jack.

3-56
ProblemRecommended Action
The audio or
video skips
or jumps.The DVD could be dirty or
scratched. Try cleaning the DVD.
When I return to
the DVD from
the system menu,
sometimes it
plays from the
beginning and
sometimes from
where it left off.If the STOP button was pressed
once, it resumes play from where
it left off.
If the STOP button was pressed
twice, it will start at the beginning
of the DVD.
However, if a change was made to
the menu, the DVD will start from
the beginning, even if the STOP
button was only pressed once.
The fast forward,
fast reverse,
previous and
next functions
do not work.Some commands that do one thing
for DVDs will not always work
or perform the same function for
audio, CDs or games.
ProblemRecommended Action
My disc is
stuck in the
player. The
EJECT/LOAD
button does
not work.Press the EJECT/LOAD button on
the remote, or the STOP/EJECT
button on the DVD player.
Turn the power off, then on again.
I lost the
remote and/or
the headphones.See your dealer for assistance.
What is the best
way to clean
the screen?Pour some isopropyl or rubbing
alcohol on a clean cloth and wipe.
Sometimes
the wireless
headphone
audio cuts out
or buzzes for a
moment then it
comes back.This could be caused by
interference from cell towers
or by using your cell phone in
the vehicle.

3-57 Rear Seat Audio (If Equipped)
This feature allows rear seat passengers to listen to any
of the music sources including AM
-FM, cassette tapes
or CDs and to use automatic tone control. The rear
seat passengers can only control the music sources
that the front seat passengers are not listening to.
For example, rear seat passengers may listen to a
cassette tape or CD through headphones while the
driver listens to the radio through the front speakers. The rear seat passengers have control of the volume for
each set of headphones. The front seat audio controls
always override the rear seat audio controls.
This feature is intended for rear seat passengers.
The following functions are controlled by the rear seat
audio system buttons:
VOL: Turn the knob clockwise to increase volume
and counterclockwise to decrease volume. The left VOL
knob controls the left headphone and the right VOL
knob controls the right headphone.
PROG: With a cassette tape in the player and the
radio playing, press this button to play a cassette tape.
Press PROG to switch between the tape and compact
disc if both are loaded. Press PROG again to return
to the radio when a cassette tape or compact disc is
playing. The inactive tape or CD will remain safely
inside the radio for future listening.
PWR: Press this button to turn the rear seat audio
system on or off. The rear speakers will be muted
when the power is turned on unless you have a Bose


equipped vehicle. You may operate the rear seat audio
functions even when the primary radio power is off.

3-59 Audio Steering Wheel Controls
(If Equipped)
If your vehicle has this
feature, certain radio
functions can be operated
by using the controls on
your steering wheel.
AM/FM: Press this control to tune to the next radio
station. When playing a cassette tape or compact disc,
press AM/FM to switch to the radio.
(Program): Press this control to tune to a higher
preset radio station. When playing a cassette tape, press
program to hear the other side of a tape that is playing.
When using the CD changer, this control will seek to the
next selection.
(Volume): Press the up or down arrow to increase
or decrease volume.
Understanding Radio Reception
AM
The range for most AM stations is greater than for FM,
especially at night. The longer range, however, can
cause stations to interfere with each other. AM can pick
up noise from things like storms and power lines.
Try reducing the treble to reduce this noise if you
ever get it.
FM Stereo
FM stereo will give you the best sound, but FM signals
will reach only about 10 to 40 miles (16 to 65 km).
Tall buildings or hills can interfere with FM signals,
causing the sound to come and go.
Understanding DVD Distortion
You may experience audio distortion in the IR
headphones when operating cellular phones, scanners,
CB radios, Global Position Systems (GPS)*, two
-way
radios, mobile fax, or walkie talkies.
It may be necessary to turn off the DVD player when
operating one of these devices in or near the vehicle.
* Excludes the OnStar

System.

3-60 Tips About Your Audio System
Hearing damage from loud noise is almost undetectable
until it is too late. Your hearing can adapt to higher
volumes of sound. Sound that seems normal can be
loud and harmful to your hearing. Take precautions
by adjusting the volume control on your radio to a
safe sound level before your hearing adapts to it.
To help avoid hearing loss or damage do the following:
1. Adjust the volume control to the lowest setting.
2. Increase volume slowly until you hear comfortably
and clearly.NOTICE:
Before you add any sound equipment to your
vehicle
-- like a tape player, CB radio, mobile
telephone or two
-way radio -- be sure you
can add what you want. If you can, it's very
important to do it properly. Added sound
equipment may interfere with the operation
of your vehicle's engine, Delphi Electronics
radio or other systems, and even damage them.
Your vehicle's systems may interfere with the
operation of sound equipment that has been
added improperly.
So, before adding sound equipment, check with
your dealer and be sure to check federal rules
covering mobile radio and telephone units.

6-33
Battery
Your new vehicle comes with a maintenance free
ACDelco
battery. When it's time for a new battery, get
one that has the replacement number shown on the
original battery's label. We recommend an ACDelco
battery. See ªEngine Compartment Overviewº in the
Index for battery location.
WARNING: Battery posts, terminals and related
accessories contain lead and lead compounds, chemicals
known to the State of California to cause cancer and
reproductive harm. Wash hands after handling.
Vehicle Storage
If you're not going to drive your vehicle for 25 days or
more, remove the black, negative (
-) cable from the
battery. This will help keep your battery from
running down.
CAUTION:
Batteries have acid that can burn you and gas
that can explode. You can be badly hurt if you
aren't careful. See ªJump Startingº in the Index
for tips on working around a battery without
getting hurt.
Contact your dealer to learn how to prepare your vehicle
for longer storage periods.
Also, for your audio system, see ªTheft
-Deterrent
Featureº in the Index.
Bulb Replacement
For the type of bulbs, see ªReplacement Bulbsº in
the Index.
For any bulb changing procedure not listed in this
section, contact your dealer.