door lock GMC ENVOY 2007 Get To Know Guide

Page 5 of 20

5
Customization Button
• Press once and the vehicle settings
will be displayed. Press again to
scroll through and set the customization features.
Select Button
• Press to select your customiza
tion feature setting while it isdisplayed on the DIC, and to move
on to the next feature.
• The customization features can be
reset to their default mode by holding
and down for four seconds.
Language Options
• If you find that the unit displays a lan
guage other than the one you preferand you are unable to change it, hold
and down until the display
begins cycling through the threeavailable languages. Release the buttons when you see the preferredlanguage.
Displaying Driver Preferences
• The driver preferences are recalled
by pressing memory button 1 or 2
located on the driver’s door. The lastvalue displayed for each preferenceis saved automatically.
See Section 3 of your Owner Manual.
SAFETY & SECURITY
Lockout Protection
Prevent your ignition key from being
locked in your vehicle
• When the key is in the ignition and
a door is open, pressing any power
door lock switch unlocks the driver’sdoor and locks all other doors.
See Section 2 of your Owner Manual.
OnStar®(if equipped)
If your vehicle is OnStarequipped, the
OnStar system provides invehicle safety,
security, and phone services, available
24 hours a day, 7 days a week. These
services are easily accessed through the
three OnStar buttons in your vehicle.
• Press the blue OnStar button to con
nect to an OnStar Advisor for services
such as OnStar Vehicle Diagnosticsor driving directions and locationassistance.*
• Press the white Phone button to make
phone calls using OnStar HandsFreeCalling.**
• Press the red Emergency button to
connect to an OnStar Advisor who
can contact a nearby emergency
services provider to request emergency services be dispatched to yourlocation.
For more information about OnStar fea
tures, refer to the OnStar Owner’s Guideand enclosed audio CD located in yourglove box.
* Routing and location assistance may require
service upgrade
**Available in most markets
See Section 2 of your Owner Manual.

Page 6 of 20

Getting to Know YourEnvoy6
Content TheftDeterrent System
Arm the ContentTheft Deterrent
System
• Lock the doors using the power door
lock switch or by pressing the Lockbutton on the Remote Keyless Entrytransmitter.
• After closing all doors, the security
light on the instrument panel cluster
stops flashing and remains lit. After adelay of about 30 seconds, the lampdarkens and the system arms itself.
• When arming with the power door
lock switch, at least one door must beopen and the key must be removed
from the ignition. (A door does nothave to be open to arm the systemwith the Remote Keyless Entry transmitter.)
• The system will not arm if the door is
locked with a key or the manual doorlock button is pressed.
• If the alarm is tripped, the horn
sounds and the headlamps/taillamps
flash for about two minutes. Thealarm sounds whenever a lockeddoor is opened without the key or
Remote Keyless Entry transmitter, or
if someone attempts to turn on the
ignition without the correct key.
Turn off the alarm
• Unlock a door with the key or press
Unlock on the Remote Keyless Entry
transmitter.
• Starting the engine with the correct
key will also turn off the alarm.
See Section 2 of your Owner Manual.

Page 14 of 20

Getting to Know YourEnvoy14
Heated, Power Outside Mirrors
(if equipped)
Activate heat feature on the power
outside mirrors
• Press the rear window defogger
button on the climate control panel.
See Section 2 of your Owner Manual.
Outside Mirror with Curb View
Assist (if equipped)
This feature automatically adjusts the
passenger side mirror downward to apreset tilt position when the vehicle is in
Reverse gear. The mirror returns to itsnormal position when the vehicle ismoved out of Reverse. See your OwnerManual to activate this system for thefirst time.
See Sections 2 and 3 of your Owner Manual.
Interior Lamps
Your vehicle is equipped with illuminated
entry and exit lighting as well as domelamps.
Activate illuminated entry feature
• Open a door or press the Unlock
button on your Remote Keyless Entry
transmitter.
• With all doors closed, the dome
lamps stay illuminated briefly and turn
off automatically.
Disable entry and exit lighting
•Push in the Dome Lamp Override
button located below the exteriorlamps switch (see “A” above). This
will override the illuminated entry feature unless the Remote Keyless Entrytransmitter is used to unlock the
vehicle. The Dome Lamp Overridefeature is useful when the vehicledoors need to be open for a longperiod of time.
See Section 3 of your Owner Manual.
A

Page 15 of 20

15
Luggage Carrier (if equipped)
Slide the crossrails to desired
position
1. Pull up the lever on each side of the
crossrail. This will release the crossrail and allow you to slide it.
2. When the crossrail is where you want
it, press down on the levers to lock itin place.
Reduce wind noise when the roof
luggage carrier is not in use
• Position the rear crossrail at the
rearmost position and the front crossrail above the rearmost portionof the rear door opening (above the Cpillar).
See Section 2 of your Owner Manual.
Note:Never carry anything on the vehi
cle roof that is longer or wider than theluggage carrier itself. (Examples: ply
wood, paneling, a mattress.) The load
could be violently torn off, causing you
or others to have a collision.
Loading cargo that weighs more than
220 pounds (100 kg) on the luggagecarrier may damage your vehicle.
Universal Home Remote
(if equipped)
The Universal Home Remote is a com
bined universal transmitter and receiverthat can activate up to three devices,such as garage door openers, entrydoor locks, gates and security systems.
It’s recommended that you read the
instructions in your Owner Manual com
pletely before attempting to program any
of the three channels on the Universal
Home Remote. The engine should beturned off when programming the
remote.
See Section 2 of your Owner Manual.
Note:Do not use the Universal Home
Remote with any garage door openerthat does not have the “stop and
reverse” feature or any opener manu
factured before April 1, 1982.
Sun Visors
Block glare
• To help block the sun’s glare, rotate
the sun visor down.
• Block the driver or passenger front
side window glare by turning the sunvisor to the side window.
• Pull out the sun visor extender (if
equipped) for additional window coverage.
See Section 2 of your Owner Manual.