reset GMC ENVOY 2007 Get To Know Guide

Getting to Know YourEnvoy4
Fuel Information Button
•Press to scroll through the range,
average fuel economy, fuel used andthe GM Oil Life System
TM.
• RANGE estimates the remaining dis
tance you can drive without refueling.
Range is based on recent fuel economy and the fuel remaining in the tank.
• AVG. ECON calculates how many
miles per gallon you are gettingbased on overall driving conditions.Press and hold the Select button
( ) while AVG. ECON is displayedand the DIC will begin calculating theaverage fuel economy from that pointin time.
• FUEL USED shows the current
amount of fuel used in gallons since
the last reset for FUEL USED. Thismode should be reset after every fueltank fillup.
• ENGINE OIL LIFE calculates an esti
mate (percentage) of the engine oil’sremaining useful life. It also will alertyou when it is time to change your oilby illuminating the CHANGE ENGOILlight on the DIC. Please remem
ber to always reset the oil life system
after an oil change by pressing andholding for four seconds while
ENGINE OIL LIFE is displayed. When
successful, the DIC will displayENGINE OILLIFE: 100%.
Driver Information Center (DIC)
(if equipped)
Your vehicle’s Driver Information Center
(DIC) is located in the instrument panel
cluster.
Access DIC modes
• Press one of the following DIC but
tons located on the steering wheel.
– Trip Information ( )
Trip Information Button
•Press to scroll through the
odometer, TRIP A, TRIP B, and
TIMER. When either TRIPAor TRIP
B is displayed, you can press the
Select button ( ) to reset the
displayed odometer.
• You can also reset a trip odometer
to zero by pressing and holding thereset stem for four seconds. WhenTIMER is displayed, you can press
to start or stop the timer. To reset
it to zero, push and hold while
TIMER is displayed.
Note:If your vehicle is not equipped
with DIC steering wheel buttons, pressthe trip odometer reset stem located inthe instrument panel cluster to selectthe information. Hold the stem for fourseconds to reset trip odometers.

5
Customization Button
• Press once and the vehicle settings
will be displayed. Press again to
scroll through and set the customization features.
Select Button
• Press to select your customiza
tion feature setting while it isdisplayed on the DIC, and to move
on to the next feature.
• The customization features can be
reset to their default mode by holding
and down for four seconds.
Language Options
• If you find that the unit displays a lan
guage other than the one you preferand you are unable to change it, hold
and down until the display
begins cycling through the threeavailable languages. Release the buttons when you see the preferredlanguage.
Displaying Driver Preferences
• The driver preferences are recalled
by pressing memory button 1 or 2
located on the driver’s door. The lastvalue displayed for each preferenceis saved automatically.
See Section 3 of your Owner Manual.
SAFETY & SECURITY
Lockout Protection
Prevent your ignition key from being
locked in your vehicle
• When the key is in the ignition and
a door is open, pressing any power
door lock switch unlocks the driver’sdoor and locks all other doors.
See Section 2 of your Owner Manual.
OnStar®(if equipped)
If your vehicle is OnStarequipped, the
OnStar system provides invehicle safety,
security, and phone services, available
24 hours a day, 7 days a week. These
services are easily accessed through the
three OnStar buttons in your vehicle.
• Press the blue OnStar button to con
nect to an OnStar Advisor for services
such as OnStar Vehicle Diagnosticsor driving directions and locationassistance.*
• Press the white Phone button to make
phone calls using OnStar HandsFreeCalling.**
• Press the red Emergency button to
connect to an OnStar Advisor who
can contact a nearby emergency
services provider to request emergency services be dispatched to yourlocation.
For more information about OnStar fea
tures, refer to the OnStar Owner’s Guideand enclosed audio CD located in yourglove box.
* Routing and location assistance may require
service upgrade
**Available in most markets
See Section 2 of your Owner Manual.

11

ENTERTAINMENT

Audio SystemsLoad one CD into the SixDisc
CD Player

1. With the ignition on, press andrelease the LOAD side of the LOAD
CD button.
2. Wait for the indicator light at the right side of the slot to turn green.
3. Insert the disc partway into the slot, label side up; the player will pull the
disc in.

MultipleDisc CD Player
(if equipped)

• Press the H or HR button until the correct hour appears on the display.
• Press and hold the M or MIN button until the correct minute appears on
the display.
The time may be set with the ignition on
or off.

Set the time with an FM station’s
Radio Data System (RDS) setting
(if equipped)

• Press and hold both HR and MN for two seconds until UPDATED and the
clock symbol appear on the display.
• If the time is not available from the station, NO UPDAT appears in the
display.

Program radio station presets

1. Turn the radio on.
2. Press the BAND button to select theband (AM/FM1/FM2/XM1/XM2).
3. Use the seek or tune knob to tune in the desired station.
4. Press AUTO EQ to select the equalization that best suits the type
of station selected.
5. Press and hold one of the six numbered pushbuttons until a beep
sounds; release the button.
6. Repeat these steps for each station preset, using a different numbered
button for each station.

Display a station’ s INFO message
when INFO appears on the display

• Press INFO to see the message.
Once the complete message has been displayed, INFO disappears
from the display.

Tune to an RDS broadcast of a
selected program type

1. Press the TYPE button to select the
Program Type you want to listen to.
2. Press the or button.

Access one of the two available XM
Satellite Radio bands (if equipped)

• Press the BAND button until XM1 or XM2 appears on the display.

MP3 Radio (if equipped)

A CDR or CDRW containing MP3
audio tracks will play automatically when
inserted into the CD/MP3 player.

See Section 3 of your Owner Manual.

Getting to Know YourEnvoy14
Heated, Power Outside Mirrors
(if equipped)
Activate heat feature on the power
outside mirrors
• Press the rear window defogger
button on the climate control panel.
See Section 2 of your Owner Manual.
Outside Mirror with Curb View
Assist (if equipped)
This feature automatically adjusts the
passenger side mirror downward to apreset tilt position when the vehicle is in
Reverse gear. The mirror returns to itsnormal position when the vehicle ismoved out of Reverse. See your OwnerManual to activate this system for thefirst time.
See Sections 2 and 3 of your Owner Manual.
Interior Lamps
Your vehicle is equipped with illuminated
entry and exit lighting as well as domelamps.
Activate illuminated entry feature
• Open a door or press the Unlock
button on your Remote Keyless Entry
transmitter.
• With all doors closed, the dome
lamps stay illuminated briefly and turn
off automatically.
Disable entry and exit lighting
•Push in the Dome Lamp Override
button located below the exteriorlamps switch (see “A” above). This
will override the illuminated entry feature unless the Remote Keyless Entrytransmitter is used to unlock the
vehicle. The Dome Lamp Overridefeature is useful when the vehicledoors need to be open for a longperiod of time.
See Section 3 of your Owner Manual.
A