power steering GMC ENVOY 2009 Get To Know Guide

Getting to Know Your Envoy2
See Section 3 of your Owner Manual.
Instrument Panel
DRIVER INFORMATION
The main features of the instrument
panel include:
A. Exterior Lamp Controls
B. Air Outlets
C. Turn Signal/Multifunction Lever
D. OnStar
®/Audio Steering Wheel
Controls
E. Instrument Panel Cluster
F. Audio Steering Wheel Controls
G. Ignition Switch
H. Audio SystemI. Climate Controls
J. Hood Release
K. Driver Information Center (DIC)
Steering Wheel Controls
L. Transfer Case Controls
M. Shift Lever
N. Accessory Power Outlet
O. Parking Brake
P. Rear Window Washer/Wiper
Q. Rear Window Defogger
R. Glove Box

Getting to Know Your Envoy6
Content Theft-Deterrent System
Arm the Content Theft-Deterrent
System
• Lock the doors using the power door
lock switch or by pressing the Lock
button on the Remote Keyless Entry
transmitter.
• After closing all doors, the security
light on the instrument panel cluster
stops flashing and remains lit. After a
delay of about 30 seconds, the lamp
darkens and the system arms itself.
• When arming with the power door
lock switch, at least one door must be
open and the key must be removed
from the ignition. (A door does not
have to be open to arm the system
with the Remote Keyless Entry
transmitter.)
• The system will not arm if the door is
locked with a key or the manual door
lock button is pressed.
• If the alarm is tripped, the horn
sounds and the headlamps/taillamps
flash for about two minutes. The
alarm sounds whenever a locked
door is opened without the key or
Remote Keyless Entry transmitter,
or if someone attempts to turn on
the ignition without the correct key.
Turn off the alarm
• Unlock a door with the key or press
Unlock on the Remote Keyless Entry
transmitter.
• Starting the engine with the correct
key will also turn off the alarm.
See Section 2 of your Owner Manual.
COMFORT
Electric Adjustable Pedals
Adjust the brake and accelerator
pedals to comfortable positions
• Press the switch located on the
steering column toward you to move
the pedals closer to you.
• Press the switch away from you to
move the pedals away from you.
See Section 2 of your Owner Manual.
Note:The pedals cannot be positioned
farther away from the driver than they
are in their standard position. This
feature can be programmed to work
with the memory function (if equipped)
on your vehicle. Adjustment of the
powered pedals requires that the
vehicle be in Park.