CD player GMC YUKON 2006 Get To Know Guide

Getting to Know YourYukon/Yukon Denali8
SixDisc CD Changer
(Denali models only)
Quick Load
• Press LOAD (“A” above) for approxi
mately three seconds. The lowest
available number will flash.
• Wait for amber lights to flash on sides
of slot (“B” above) before inserting
CD. The next available number will
flash and accept another CD until all
are occupied.
• To exit Quick Load, press either a
number with a CD in it or LOAD.
Quick Unload
• Press EJECT ( ) for approximate
ly three seconds; all CDs will eject
from highest number to lowest.
Load 1 CD
• Press LOAD; all available numbers
will flash amber.
• Select the number desired.
• Wait for amber lights to flash on sides
of slot before inserting CD.
• Insert CD.
• Repeat to load more CDs.
Unload 1 CD
• Press EJECT ( ).
• Press number for CD desired.
Play a CD
• Option 1: Select the number for the
CD desired (wait eight seconds).
• Option 2: Press 5/SIDE button on
radio face to scroll through CDs.
Select CD Track
• Option 1:
PREV/NEXT on
radio.
• Option 2: SEEK
arrows on radio.
• Option 3: SEEK
arrows on steering
wheel.
See Section 3 of your Owner Manual.
A
B
Touch Screen Navigation
Entertainment System
(if equipped)
Your vehicle’s Navigation Entertainment
System provides you with detailed maps
of all major highways and roads
throughout the United States. After you
enter a destination, the system provides
Note:CDs with any labels may jam in
the CD player.Label a CD using a per
manent marker. If more than one CD is
inserted into the slot at one time, or if
scratched or damaged CDs are played,
the CD player could be damaged. When
using the CD player, use only CDs in
good condition without labels; load one
CD at a time; and keep the CD player
and the loading slot free of foreign
materials, liquids and debris.
YukonYukonDenali 06 Beta3 5/19/05 10:03 AM Page 8

9
Universal Home Remote
(if equipped)Rear Seat Entertainment System
(if equipped)
Program the Universal Home Remote
1.Determine which of the three chan
nels (buttons) you want to program
for functions such as a garage door
opener, gate opener or entry door
locks.
2. Press and hold the desired remote
button through step 3.
3. When the remote light blinks slowly
(within 30 seconds), hold your trans
mitter/opener 1" to 3" from the remote
buttons. Then hold your transmitter
button on until the remote light flash
es rapidly (up to 90 seconds). The
process is now complete.
See Section 2 of your Owner Manual.
The DVD Rear Seat Entertainment
(RSE) system includes a DVD player
and a video display screen (located in
the overhead console), two sets of wire
less headphones and a remote control.
To play a DVD:
•The ignition must be in the Run or
Accessory position, or RAP(Retained
Accessory Power,available after the
ignition is turned off) must be active.
•Push forward on the release latch to
fold down the video screen.
• Insert a DVD into the loading slot;
it will automatically start.
•If a DVD is already loaded, press the
Play/Pause button.
•Press the CD/AUX button on the
radio until RSE appears on the radio
display to listen to the DVD through
your vehicle speakers.
•When using the wireless head
phones, turn the headphones on and
adjust the volume using the volume
knob.
Note:If your transmitter has a “rolling
code” feature, this process may not
work. Please refer to your Owner
Manual.
turnbyturn instructions for reaching
your destination. In addition, the system
can help you locate banks, airports,
restaurants, post offices, ATMs and
more.
See your Owner Manual or Navigation
Entertainment System Quick Reference
Guide for operating instructions.
See Section 3 of your Owner Manual.
To stop or eject a DVD:
•To stop playing a DVD, press the
Stop button. Press the Play button to
resume viewing. If the Stop button is
pressed twice, the DVD will resume
viewing at the beginning.
•To eject a DVD, press the Eject but
ton on the DVD player.
See Section 3 of your Owner Manual.
YukonYukonDenali 06 Beta3 5/19/05 10:03 AM Page 9