key GMC YUKON 2007 Get To Know Guide

Page 1 of 24

DRIVER INFORMATION
Instrument Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2Instrument Panel Cluster . . . . . . . . . . . . . . . . . . . . . . .3
Vehicle Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Driver Information Center . . . . . . . . . . . . . . . . . . . . . .4
SAFETY & SECURITY
Remote Keyless Entry . . . . . . . . . . . . . . . . . . . . . . . . . .6
Content TheftDeterrent System . . . . . . . . . . . . . . . . . .7OnStar
® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
COMFORT
Power Seat Controls . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Heated Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Memory Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Adjustable Pedals . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9Sun Visor Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . .9
Manual Climate Controls . . . . . . . . . . . . . . . . . . . . . . . .9Automatic Climate Controls . . . . . . . . . . . . . . . . . . . .10
Rear Seat Climate Controls . . . . . . . . . . . . . . . . . . . . .10
ENTERTAINMENT
Audio System Features . . . . . . . . . . . . . . . . . . . . . . . .11MultipleDisc CD Player . . . . . . . . . . . . . . . . . . . . . . . .14
Touch Screen Navigation Entertainment System . . .14
XM Satellite Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Rear Seat Audio and DVD Rear Seat
Entertainment Systems . . . . . . . . . . . . . . . . . . . . . . . .15
Audio Steering Wheel Controls . . . . . . . . . . . . . . . . .16CONVENIENCE
Automatic Dimming Rearview Mirror with
Compass and Temperature Display . . . . . . . . . . . . . .16
Remote Vehicle Start . . . . . . . . . . . . . . . . . . . . . . . . . .17
Power Running Boards . . . . . . . . . . . . . . . . . . . . . . . .17Auto Turn Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Cruise Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Rainsense™ II Windshield Wipers . . . . . . . . . . . . . . .18
Heated Windshield Washer Fluid . . . . . . . . . . . . . . . .19
Rear Vision Camera . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Automatic Headlamp System . . . . . . . . . . . . . . . . . . .19Folding 2ndRow Seats . . . . . . . . . . . . . . . . . . . . . . . .20
Folding 3rdRow Seats . . . . . . . . . . . . . . . . . . . . . . . .20Liftgate and Liftglass Operation . . . . . . . . . . . . . . . . .21
Sunroof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Ultrasonic Rear Parking Assist . . . . . . . . . . . . . . . . .22
Universal Home Remote . . . . . . . . . . . . . . . . . . . . . . .22
PERFORMANCE & MAINTENANCE
6Speed Automatic Transmission Controls . . . . . . .22StabiliTrak
®– Stability Control System . . . . . . . . . . .22
Tire Pressure Monitor . . . . . . . . . . . . . . . . . . . . . . . . .23
Resetting the Engine Oil Life System . . . . . . . . . . . .23
OWNER INFORMATION
Roadside Assistance . . . . . . . . . . . . . . . . . . . . . . . . . .24My GMLink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Congratulations on your purchase of a GMC Yukon or Yukon Denali. Please read this information about your vehicle’s
features and your Owner Manual to ensure an outstanding ownership experience. Note that your vehicle may not includeall the features described in this booklet. Keep this booklet with your Owner Manual for easy reference.

Page 3 of 24

3
See Section 3 of your Owner Manual.
Instrument Panel Cluster
A
B
C
D
E
F
G
Your vehicle’s instrument panel is
equipped with this cluster or one verysimilar to it. The instrument panel
cluster includes these key features:
A.Oil Pressure Gauge
B.Fuel GaugeC.Driver Information Center
Display/Odometer
D.Tachometer
E.Speedometer
F.Voltmeter
G.Engine Coolant Temperature
Gauge
Note:
The instrument panel cluster is
designed to let you know about manyimportant aspects of your vehicle’s
operation. It is important to read yourOwner Manual and become familiarwiththe information being relayed to
youby the lights, gauges and indicators,
as well as what action can be taken toensure safety and to prevent damage.

Page 5 of 24

5
(Vehicle Information):Press
this button to display the oil life,English/Metric units, tire pressure andtire pressure system programming
(if equipped), engine hours and RemoteKeyless Entry programming.
(Customization):Press this button
to customize certain vehicle features toyour preference.
(Set/Reset):Press this button to set
or reset certain vehicle functions as wellas acknowledge DIC messages.
Customization Features
To customize features:
1. With the vehicle in Park, turn on the
ignition.
2. Press the (Customization) button
to display available customizationfeatures.
3. With the desired customization
feature displayed, press the (Set/Reset) button to access thefeature settings.
4.Press the button to scroll through
the available settings.
5. With the desired setting displayed,
press the button to select it.
6. To exit the Feature Settings menu,
press the button until EXITFEA
TURE SETTINGS is displayed and
then press , or press the button or thebutton.
Customization features include:
• Auto Door Lock — Automatically
locks the vehicle doors
• Auto Door Unlock — Automatically
unlocks the vehicle doors
• Remote Door Lock — Type of feed
back from Remote Keyless Entrylocking
• Remote Door Unlock — Type of feed
back from Remote Keyless Entryunlocking
• Delay Door Lock — Delays locking
doors and liftgate after exiting
• Exit Lighting — Amount of time the
exterior lamps remain on after exiting
• Approach Lighting — Exterior lamps
turn on when using Remote KeylessEntry
• Chime Volume — Increases the
volume level
• Park Tilt Mirrors (if equipped) —
Automatically tilts down the outsidemirrors when in Reverse
• Easy Exit Seat (if equipped) —
Automatically moves back the driver’s
seat when the key is removed from
the ignition
• Memory Seat Recall (if equipped) —
Automatically recalls the driver’s seatposition when using Remote KeylessEntry
• Remote Start (if equipped) —
Enables remote vehicle start
• Factory Settings — Sets all features
to the factory default
• Exit Feature Settings

Page 6 of 24

Getting to Know YourYukon/Yukon Denali6
Warnings and Messages
The DIC provides a variety of vehicle
messages (depending on optional equipment) as well as warnings if a problemis sensed in a vehicle system.
To acknowledge a message and clear it
from the display, press any of the DICbuttons. Some urgent messages cannot
be cleared from the DIC display.
If your vehicle is equipped with OnStar
and a warning message appears, youcan press the blue OnStar button and
speak to an OnStar Advisor. In many
vehicles, OnStar Advisors can accesscertain diagnostic information and cantell you how serious the condition is andwhat you should do about it.
See Section 3 of your Owner Manual.
The Remote
Keyless Entry
(RKE) transmitter includes
the followingfunctions:
(Remote
Vehicle Start)
(if equipped): If
your vehicle hasthis feature, itcan be used tostart the engine.
(See Remote Vehicle Start.)
(Lock):Press this button to lock all
the doors. If enabled through the DriverInformation Center (DIC), the parkinglamps will flash once and/or the horn willchirp to indicate locking has occurred.
(Unlock):Press this button to unlock
the driver’s door. If the button is pressedagain within five seconds, all remainingdoors will unlock. If enabled through theDIC, the parking lamps will flash once toindicate unlocking has occurred.
(Liftglass):Press and hold this
button to open the liftglass.
(Power Liftgate) (if equipped):
Press and hold this button to open or
close the liftgate. The taillamps will flashand a chime will sound to indicate theliftgate is activated.
(Vehicle Locator/Panic Alarm):Press this button to locate your vehicle.
The parking lamps will flash and thehorn will sound three times.
Note:Your vehicle’s warnings and mes
sages provide critical information thatcan prevent damage to your vehicle.Review your Owner Manual to becomefamiliar with the information displayedand the action required.
Remote Keyless Entry
SAFETY & SECURITY

Page 7 of 24

7
Press and hold the button to activate the
panic alarm. The parking lamps will flashand the horn will sound for 30 seconds.
Press the button again or turn the ignition to Run to cancel the panic alarm.
See Section 2 of your Owner Manual.
To arm the content theftdeterrent alarm
system, lock the doors using the RKE
transmitter. The security light on theinstrument panel cluster will flash forapproximately 30 seconds to indicate
the alarm is activated. To disarm thesystem, unlock the doors using the RKE
transmitter.
The alarm system will not be armed or
disarmed if the doors are locked or
unlocked with a key, the manual doorlock or the power door lock switch.
See Section 2 of your Owner Manual.
The OnStar system provides invehicle
safety, security and phone services,
available 24 hours a day, 7 days aweek. These services are easily
accessed using the three OnStar
buttons located on the inside rearview mirror.
For more information about OnStar
features, refer to the OnStar Owner’s
Guide and enclosed audio CD in yourglove box.
See Section 2 of your Owner Manual.
The power seat controls for the driver
and front passenger seats are locatedon the outboard side of the seats.
Power Seat: Use the control (A) to
move the seat forward/rearward andup/down as well as to raise/lower thefront or rear of the seat cushion.
Power Recline (if equipped): Use the
control (B) to recline/raise the seatback.
Power Lumbar (if equipped): Use the
control (C) to increase/decrease lumbarsupport and to raise/lower the height ofthe support.
See Section 1 of your Owner Manual.
Power Seat Controls
(if equipped)
A
B
C
Content TheftDeterrent System
OnStar®(if equipped)
COMFORT

Page 8 of 24

Getting to Know YourYukon/Yukon Denali8
To operate the heated seats, the engine
must be on. The heated seat operation
turns off when the ignition is turned off.
Front Seats
The heated front seat controls are locat
ed on the front doors.
(Heated Seatback):Press the top
button to turn on the heated seatback.
(Heated Seat/Seatback):Press the
bottom button to turn on the heated seatand seatback.
Continue to press the desired button to
cycle through the temperature settingsof High (three indicator lights), Medium(two indicator lights), Low (one indicator
light) and Off (all indicator lights are off).
2ndRow Seats
The heated rear seat controls are on the
rear control panel, located on the backof the floor console.
(Heated Seat):Press the button
to turn on the heated seat and cyclethrough the temperature settings.
See Section 1 of your Owner Manual.
The memory buttons are located on
the driver’s door. Settings can be pro
grammed for the driver’s seat, outsidemirrors and the adjustable pedals (ifequipped) for two drivers.
To save memory settings:1.Adjust the driver’s seat, outside mir
rors and pedals to a comfortableposition.
2. Press and hold button 1 or 2 until two
beeps sound.
Repeat these steps for a second driver.
To recall the settings, press memory
button 1 or 2 with the vehicle in Park.
If the Remote Keyless Entry transmitteris used to enter the vehicle and thememory seat recall feature is on (seeCustomization Features), the settings
will be recalled automatically.
EasyExit Seat
The easyexit seat button is located
between the two memory buttons.Withthe vehicle in Park, press the
(EasyExit) button to move the driver’s
seat to the exit position.
If the easyexit seat feature is on (see
Customization Features), automatic seatmovement will occur when the key isremoved from the ignition.
See Section 1 of your Owner Manual.
Heated Seats (if equipped)Memory Settings (if equipped)

Page 17 of 24

17
This feature allows you to start the
engine from outside the vehicle by using
the Remote Keyless Entry (RKE) trans
mitter. The remote start capability mustbe turned on using the Driver
Information Center.
The vehicle’s automatic climate control
system (if equipped) will default to aheating or cooling mode based onoutside temperature, and the manualclimate control system will turn on at
the same setting as when the vehicle
was last turned off.
Starting the Vehicle
To remote start the vehicle:
1.
Aim the RKE transmitter at the vehicle.
(Transmitter range is within approximately 200 feet of the vehicle.)
2. Press and release the (Lock)
button on the transmitter.
3. Immediately press and hold the
(Remote Start) button for about four
seconds. When the vehicle starts, theparking lamps will turn on. The engine
will continue running for 10 minutes.
4.Repeat these steps for a 10minute
time extension. Only two consecutive
remote starts are allowed.
When you enter the vehicle after a
remote start, the key must be insertedinthe ignition and turned to the Run
position before driving.
Canceling a Remote Start
To turn off the engine instead of driving
after a remote start:
• Press and hold the (Remote Start)
button until the parking lamps turn off.
• Press and release the Hazard
Warning Flashers button. Press it
again to turn off the flashers.
• Turn the key in the ignition switch to
the Run position and then off.
See Section 2 of your Owner Manual.
The power running boards extend from
beneath the vehicle when any side door
is open. The vehicle must be stationary
for the running boards to operate. Todisable the running boards, press the
(Running Boards) disable button on
the instrument panel. Press the button
again to turn the running boards back on.
See Section 2 of your Owner Manual.
The turn signal lever includes an auto
matic lane change signal feature.
To signal a lane change, raise or lower
the lever until the arrow on the instrument panel cluster starts to flash, and
then release the lever. The turn signalwill automatically flash three times. If the
Tow/Haul mode is selected, the turn signal will automatically flash six times.
See Section 3 of your Owner Manual.
Remote Vehicle Start
(if equipped)
Note: Remote Vehicle Start will not
operate if the key is in the ignition, thehood or liftgate is open, or the Check
Engine light is illuminated on the instru
ment cluster.
Auto Turn Signal
Power Running Boards
(if equipped)

Page 19 of 24

19
Press the (Heated Washer Fluid)
button, located below the climate controls on the instrument panel, to sprayheated washer fluid on the windshield.This will help to clear ice, tree sap orbugs from the windshield. A light on the
switch will flash while the washer fluid is
heating, which may take up to 40 seconds. The wipers will automatically turn
on for four cycles or until the button ispressed again.
See Section 3 of your Owner Manual.
The rear vision camera displays a view
of the area behind the vehicle on thenavigation screen when the vehicle isshifted into Reverse. Once shifted out ofReverse, the navigation screen willreturn to the last screen displayed afterapproximately 10 seconds.
To turn the camera on or off:
1.Shift into Park.
2. Press the Menu hard key to enter the
Menu options.
3.Press the Menu hard key to select
Display, or touch the Display screenbutton.
4. Touch the Rear Camera Options
screen button.
5.Touch the Rear Camera Image in
Reverse screen button.
To clean the camera lens, located above
the license plate, rinse it with water andwipe it with a soft cloth.
See Section 2 of your Owner Manual.
Your vehicle is equipped with an
Automatic Headlamp System, which
turns on the Daytime Running Lamps
(DRL) during the day and the head
lamps and other exterior lamps at night
or when necessary.
The system uses a light sensor, located
on top of the instrument panel, to determine light conditions. For proper systemoperation, avoid placing any objects on
or near the sensor.
Exterior Lamp Controls
The exterior lamps control knob is locat
ed on the instrument panel to the left ofthe steering wheel.
(Off):When operating in the AUTO
position, a momentary turn of the knob
to the Off position will turn off theAutomatic Headlamp System and allexterior lights, excluding the DRLs.
AUTO (Automatic):Automatically turns
on the DRLs in the daytime and theAutomatic Headlamp System at night or
when necessary.
(Parking Lamps):Manually turns
on parking lamps and taillamps.
(Headlamps):Manually turns on
the headlamps and other exterior lamps.
(Fog Lamps)(if equipped): Press
this button to turn the fog lamps on or
off.
Heated Windshield Washer Fluid
(if equipped)
Rear Vision Camera
(if equipped)
Automatic Headlamp System

Page 21 of 24

21
2. Pull down the seat until it latches to
the floor.
3. Lift up the seatback until it locks in
place. Pull on the seatback to makesure it is locked.
See Section 1 of your Owner Manual.
Use the Remote Keyless Entry (RKE)
transmitter or the power door lockswitches to unlock the liftgate.
Liftgate:Press the touchpad (A) on
the back of the handle in the center ofthe liftgate; then pull up the liftgate toopen it.
Liftglass:Press the touchpad (B) on the
liftgate, located above the right side ofthe license plate, or use the RKE trans
mitter to unlatch the liftglass.
Power Liftgate (if equipped)
There are several ways to open and
close the power liftgate:
• Press and hold the power liftgate but
ton on the RKE transmitter until theliftgate starts moving.
• Press the touchpad on the liftgate
handle to open.
• Press the button on the bottom of the
liftgate to close.
•Press the (Power Liftgate) switch
on the overhead console inside thevehicle.
To turn off the power liftgate function,
press the (Power Liftgate Off) switchon the overhead console.
See Section 2 of your Owner Manual.
The open/close and vent switches for
the power sunroof are located on the
overhead console. The open/closeswitch has two detents.
(ExpressOpen):Press the rear of
this switch completely (to the second
detent) to expressopen the sunroof. Tostop the sunroof, press the switch again.
To partially open the sunroof, lightly
press and hold the rear of the switch (tothe first detent) until the sunroof reachesthe desired position.
(ExpressClose):Press the front of
this switch completely (to the seconddetent) to expressclose the sunroof. To
stop the sunroof, press the switch again.
To partially close the sunroof, lightly
press and hold the front of the switch (tothe first detent) until the sunroof reachesthe desired position.
(Vent): Press the rear of this switch
to vent the sunroof. Press the switchagain to stop the sunroof.
Press and hold the front of the switch
toclose the sunroof.
See Section 2 of your Owner Manual.
Liftgate and Liftglass Operation
AB
Sunroof (if equipped)