turn signal GMC YUKON 2019 Get To Know Guide

2
INSTRUMENT PANEL
Audio Next/Previous Favorite Station Controls (behind steering wheel)
Cruise Control/ Forward Collision Alert/Heated Steering Wheel Buttons
Driver Information Center Controls/Voice Recognition Buttons
Audio Volume Controls (behind steering wheel)
Tilt/Telescopic Steering Wheel Control
Instrument Panel Illumination Control/Exterior Lamp Control4WD ControlF
Traction Control and StabiliTrak/Front and Rear Park Assist/Lane Keep Assist/Adjustable Pedals/Power Assist StepF Buttons
Driver Information Center
Turn Signal/ Windshield Wipers Lever
Integrated Trailer Brake Control
Low Fuel
Traction Control Off
Lane Keep Assist Warning
Vehicle Ahead
Brake System
Cruise Control Set
StabiliTrak Active
StabiliTrak Off
Security
Tow/Haul Mode
Lights On Reminder
Airbag Readiness
Symbols

4
REMOTE KEYLESS ENTRY TRANSMITTER (KEY FOB)
Unlock
Press to unlock the driver’s door. Press again to unlock all doors.
Lock
Press to lock all doors.
Press and hold the Lock/Unlock buttons to automatically fold/unfold the power mirrors.
Note: To change the Auto Mirror Folding setting, go to Settings > Vehicle > Comfort and Convenience.
Liftglass
Press twice to open the liftglass.
Power Liftgate
Press twice to open or close the power liftgate.
Vehicle Locator/Panic Alarm
Press and release to locate your vehicle. Press and hold to activate the alarm. Press again to cancel the alarm.
Remote Vehicle Start
Press and release the Lock button and then press and hold the button until the turn signal  lamps flash  (about  4 seconds) to start the engine from outside the vehicle. After entering the vehicle, turn on the ignition.
• During a remote start, the engine will run for 15 minutes.
• Remote Start can be extended once by repeating the remote start procedure.
• Press and hold the button until the  parking  lamps turn  off to cancel  a remote start.
• The heated/ventilated seats will turn on  during  a remote  start (if selected in the Vehicle Settings menu) when outside temperatures warrant.
Note: If a key fob is left in the vehicle when locking the vehicle, the Remote Left in Vehicle Alert may sound. To program the remote lock, unlock, and remote start settings, go to Settings > Vehicle > Remote Lock, Unlock, Start.
See Keys, Doors and Windows in your Owner’s Manual.
UNIVERSAL REMOTE SYSTEM
The Universal Remote System on the overhead console enables your vehicle to control 3  different  devices, ranging from garage doors and gates to home light-ing. Go to www.homelink.com for detailed
videos and instructions on how to pro-gram the Universal Remote System. For additional assistance, call 1-800-355-3515.
See Instruments and Controls in your Owner’s Manual.

8
PROGRAMMING THE LIFTGATE
HEIGHT
1. Turn the Power Liftgate knob to the 3/4 mode position.
2. Open the liftgate.
3. Adjust the liftgate manually to the desired height.
4. To save the setting, press and hold the button next to the liftgate latch for  3  seconds.  The turn  signals  flash and a beep sounds when the setting is saved.
HANDS-FREE POWER PROGRAMMABLE LIFTGATE
OPEN/CLOSE THE POWER LIFTGATE
Press the Power Liftgate button on  the  Remote  Keyless Entry  (RKE) transmitter twice.
Press the Power Liftgate knob on the overhead console.
Press the touchpad on the liftgate handle to open the liftgate.
Press the button next to the liftgate latch to close the liftgate.
HANDS-FREE OPERATION
To open or close the liftgate hands-free, kick your foot straight in and out under the center of the rear bumper. Do not swing your foot side-to-side. The RKE transmitter must be within 3 feet of the liftgate.See Keys, Doors and Windows in your Owner’s Manual.
WIPERS AND WASHERS
REAR WIPER
Slide the switch to activate the rear wipers.
OFF
INT Intermittent
ON
See Instruments and Controls in your Owner’s Manual.
WINDSHIELD WIPERS
Rotate the band on the lever to activate the wipers.
Fast Wipes
Slow Wipes
INT Intermittent
Rotate the band up for more frequent wipes or down for less frequent wipes.
AUTO – Rainsense™ On/Off
Press to have the wipers operate auto-matically when moisture is detected on the windshield. Rotate the INT band to adjust the sensitivity setting.
OFF
Single Wipe
Washer Fluid
Push the paddle forward to spray  
washer  fluid on the  windshield.

17
FORWARD AUTOMATIC BRAKING – In potential front-end imminent collision situa-tions with detected vehicles, the brakes may be applied, if you have not already done so, to help reduce damage or help avoid collisions at very low speeds with vehicles directly ahead. Forward Automatic Braking works at speeds of 5–50 mph or, if also equipped with Adaptive Cruise ControlF, at speeds above 2 mph.
To set the Forward Automatic Braking and Forward Collision Alert systems to Alert and  Brake,  Alert, or Off,  go to Settings  >  Vehicle  > Collision/Detection  Systems > Forward Collision System.
LANE KEEP ASSIST WITH LANE DEPARTURE WARNING – The system may help you avoid collisions due to unintentional lane departures. The Lane Keep Assist Indicator is green if the system is available to assist. If the vehicle approaches a detected lane marking without using a turn signal in that direction, the system may assist by gently turning the steering wheel and displaying an amber .
If active driver steering is not detected, the amber  may  flash  and the Safety  Alert Seat may pulse  or beeps  may sound  (if selected)  on the  side  of the  departure  direc-tion as the lane marking is crossed. The Lane Keep Assist system does not continu-ously steer the vehicle; the driver needs to steer and be in complete control of the vehicle.
Press the Lane Keep Assist button on the left side of the instrument panel to turn  the system  on or off.
LANE CHANGE ALERT WITH SIDE BLIND ZONE ALERT – While driving, the sys-tem displays a warning symbol on the left or right side mirror when a vehicle is detected in that side blind zone area or rapidly approaching that area. The warning symbol flashes if a  turn  signal  is activated  when a vehicle  has been  detected  on the same side.
 To  turn  the system  on or off,  go to Settings  >  Vehicle  > Collision/Detection  Systems > Lane Change Alert.
REAR VISION CAMERA – When the vehicle is in Reverse, a view of the area behind the vehicle displays on the infotainment screen. Vehicle speed must be below 8 mph.
 To  turn  the Rear  Vision  Camera  Guidelines  or  Rear  Park Assist  Symbols  on  or off, go to Settings > Rear Camera.
REAR CROSS TRAFFIC ALERT – When the vehicle is in Reverse, the system warns of cross-traffic  coming  in either  direction  by displaying  a red  alert  on the  infotainment screen and the left or right side of the Safety Alert Seat pulses or beeps sound (if selected). 
 To  turn  the system  on or off,  go to Settings  >  Vehicle  > Collision/Detection  Systems > Rear  Cross  Traffic  Alert.
FRONT AND REAR PARK ASSIST – During low-speed parking maneuvers, the sys-tem  provides  “distance  to closest  object”  information  on the  Driver  Information  Center and the Safety  Alert Seat pulses  or a beep  sounds  (if  selected).  When an object  is very close,  the Safety  Alert Seat  pulses  or a continuous  beep  sounds  (if selected).
 To  turn  the system  on or off,  press  the Park Assist button on the left side of the instrument panel.
DRIVER ASSISTANCE SYSTEMS
See Driving and Operating in your Owner’s Manual.
F Optional equipment

19
The ITBC system can be used to adjust the amount of power output, or Trailer Gain,
available to the trailer brakes. The control panel is located on the left side of the instrument panel. ITBC information is displayed on the Driver Information Center.
Adjust the Trailer Gain by pressing the +/– adjustment buttons on the control panel.
 Squeeze  the levers  together  (left lever  does not move) on the control panel to manually apply the trailer brakes.
See Driving and Operating in your Owner’s Manual.
INTEGRATED TRAILER BRAKE CONTROL (ITBC)
The traction control system limits wheelspin and the StabiliTrak® stability control  
system  assists with  directional  control of the  vehicle  in difficult   driving conditions. Both systems turn on automatically every time the vehicle is started.
Turn off traction control if the vehicle is stuck and rocking the vehicle is required.
Press the Traction Control/StabiliTrak Off button on the left side of the instru-ment  panel  to turn  traction  control off or on.  The Traction  Control Off light  will  
illuminate  on the  instrument  cluster when the  system  is off.
See Driving and Operating in your Owner’s Manual.
TRACTION CONTROL AND STABILITRAK SYSTEMS
The Low Tire Pressure light on the instrument cluster illuminates when one or more of the  vehicle’s  tires  is significantly  underinflated.  Fill the  tires  to the  proper  tire pressures listed on the Tire and Loading Information label, located below the driver’s door latch. Current tire pressures can be viewed on the Driver Information Center.
The Tire  Fill Alert  provides  visual  and audible  alerts to help  when  inflating  a tire  to the recommended  tire pressure  (does not apply  to spare  tire). When  the recommended pressure  is reached,  the horn  sounds  and the turn  signals  change  from flashing  to solid. 
Refer to your Owner’s Manual for information about normal monthly tire maintenance.
See Vehicle Care in your Owner’s Manual.
TIRE PRESSURE MONITOR WITH TIRE FILL ALERT
The Tow/Haul Mode adjusts the transmission shifts to reduce shift cycling, such as when towing or hauling heavy loads or driving on steep grades.
Press the Tow/Haul Mode button on the end of the shift lever to turn the  
system  on or off.
See Driving and Operating in your Owner’s Manual.
TOW/HAUL MODE