Settings HONDA ACCORD 2005 CL7 / 7.G Owners Manual

Push or pull the adjustment knob
right, left, up, or down to move the
mirror.
When you f inish, turn the
adjustment knob to the center
(of f ) position. This turns of f the
adjustment knob to keep your
settings.
Turn the ignition switch to ON (II).
Turn the adjustment knob to L
(driver’s side) or R (passenger’s
side).
Keeptheinsideandoutsidemirrors
clean and adjusted f or best visibility.
Be sure to adjust the mirrors bef ore
you start driving.
The inside mirror has day and night
positions. The night position reduces
glare f rom headlights behind you.
Flip the tab on the bottom edge of
the mirror to select the day or night
position. 3. 4.
1. 2.
CONT INUED
Mirrors
A djusting the Power Mirrors
Inst rument s and Cont rols
93
ADJUSTMENT KNOB
TAB
——y

y
(%yy

ÛÝ
When the indicator in the DUAL
button is off, both sides adjust to the
same temperature.
Press the DUAL button to select
dual temperature control mode (see
page ).
This button turns the air
conditioning on and of f . The
indicator above the button is on
when the A/C is on.
On EX with Leather and EX-V6
models, see page f or automatic
climate control and semi-automatic
operation inf ormation.
Select the f an speed by pressing the
A/C button to view the display, then
press any of the f an control icons.
Turning this dial clockwise increases
the temperature of the airflow.
The driver and passenger can select
independent temperature settings.Press the DUAL button. The
indicator in the button will come on.
The driver and passenger can each
select the temperature control
buttons ( or ) to the
desired setting.
Turn this dial to increase or decrease
the fan speed and airflow.
Select the f an speed by pressing the
fan control buttons ( or ).
The f an speed is shown by vertical
bars in the display. Push the DUAL button. When the indicator in the button is on, turn the
dials to adjust the temperature. 113
111
Vehicles without navigation system
Vehicles with navigation system
Vehicles without navigation system Vehicles with navigation system
On all models except EX with Leather and EX-V6 models
On EX with Leather and EX-V6 models On all models except EX with Leather
and EX-V6 models
On EX with Leather and EX-V6 models On EX with Leather and EX-V6 models
On all models except EX with Leatherand EX-V6 models
Vents, Heating, and A/C
Dual Button
Air Conditioning (A/C) Button/ Icons
T emperature Control
Fan Control
106
——y

y
(%y
y

µµµ
µ
Each side of the bars (1
6) or preset icon can store one
f requency on AM, and two
f requencies on FM.
Select the desired band, AM or
FM. FM1 and FM2 let you store
two f requencies with each side of
the preset bar or each preset icon.
Press the SOUND button repeatedly
to display the bass (BAS), treble
(TRE), balance (BAL), and f ader
(FAD) settings. On models with
navigation system, touch the
SOUND icon or press the TUNE
knob.press the
A.SEL button or touch the AUTO
SELECTicon.Thisrestoresthe
presets you originally set.
If you do not like the stations auto
select has stored, you can store
other f requencies on the preset bars
or icons as previously described.
You will see a ‘‘0’’ displayed af ter
pressing a preset bar or icon if auto
select cannot f ind a strong station f or
every preset bar or icon.
Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
The preset f requencies will be lost if
your vehicle’s battery goes dead, is
disconnected, or the radio f use is
removed. If you are
traveling far from home and can no
longer receive your preset stations,
you can use the auto select feature to
find stations in the local area.
Press the A. SEL button or touch the
AUTO SELECT icon. ‘‘A. SEL’’
f lashes in the display (the upper
display on models with navigation
system), and the system goes into
scan mode f or several seconds. It
stores the f requencies of six AM,
and twelve FM stations in the preset
bars or icons.
Pick a preset number (1 6), and
hold it until you hear a beep.
Press the lef t or right side of the
bar or icon and hold it until you
hear a beep.
UsetheTUNE,SEEK,orSCAN
function to tune the radio to a
desired station.
First push the AUDIO DISPLAY
button to view the preset icons.
1. 2. 3. 4.
To turn of f auto select,
On models without navigation system
Preset
Adjusting the Sound
AUTO SELECT
Playing the AM/FM Radio
120
——y
y
(%y
y

µ
Your vehicle’s audio system will
disable itself if it is disconnected
f rom electrical power f or any reason.
To make it work again, you must
enter a specif ic code using the preset
bars or the TUNE knob. Because
there are hundreds of number
combinations possible, making the
system work without knowing the
exact code is nearly impossible.
Youshouldhavereceivedacardthat
lists your audio system’s code and
serial numbers. It is best to store this
card in a saf e place at home. In
addition, you should write the audio
system’s serial number in this
Owner’s Manual. If your vehicle’s battery is
disconnected or goes dead, or the
radio f use is removed, the audio
system will disable itself . If this
happens, you will see ‘‘ ’’/
‘‘ ’’ in the f requency display
the next time you turn on the system.
Use the preset bars to enter the code.
Thecodeisontheradiocodecard
included in your Owner’s Manual kit.
When it is entered correctly, the
radio will start playing.
If you make a mistake entering the
code, do not start over; complete the
sequence, then enter the correct
code. You have ten tries to enter the
correct code. If you are unsuccessf ul
in ten attempts, you must then leave
the system on f or 1 hour bef ore
trying again.You will have to store your favorite
stations on each side of the preset
bars (1 6) or icons af ter the system
begins working. Your original
settings were lost when the power
was disconnected.
If you lose the card, you must obtain
the code number f rom a dealer. To
do this, you will need the system’s
serial number.
OnEX,EX-V6,andLX-V6models
Radio T hef t Prot ect ion
Features
149
——y
y
(%y
y