keyless HONDA ACCORD SEDAN 2011 8.G Technology Reference Guide

R E A R V I E W C A M E R A( m o d e l s w i t h n a v i g a t i o n )
How It Works
• When you shift into Reverse (R)\b a realtime imageof the area behind your vehicle is shown in the
navigation display\b along with helpful parking guide
lines.
• Turn the guide lines off by pressing and holding CANCEL for about 3 seconds.
• The display turns off when you shift out of Reverse.
For added convenience\b the area behind your vehicle is displayed to help you navigate
while backing up.
DRIVING POSITION MEMORY SYSTEM (DPMS) (if equipped)
Store a driver’s seat position into memory for each remote transmitter.
Programming DPMS
I P O D®O R U S B F L A S H M E M O R Y (if equipped)
Play audio files from your compatible iPod or USB flash memory device through your
vehicle’s audio system.
Connecting Devices and Playing Audio Files
1. Open the center console\b and pull
out the USB adapter cable.3.Press CD/AUX or AUX to begin
playing.
2. Connect the USB connector to your
iPod dock connector or flash drive.
iPod is a registered trademark of Apple Computer, Inc ., registered in the U.S. and other countries. iPod not included.
Note\b A stored memory position is linked to the corresponding keyless remote (1 or 2).
Each item begins to adjust when you unlock the driver’s door with the remote and enter
the vehicle.
1. Turn the ignition switch to
ON (II). Shiftinto Park (P).
2. Adjust your seat to the preferred
setting. 3.
Press and hold the SET button
until you hear a beep\b then release.
4. Press and hold the memory
button # corresponding to the
remote (1 or 2) you are using
until you hear two beeps.
89
11 Accord 4D TRG\fATG_NEW STYLE 7/20/2010 3\f05 PM Page \b