ignition HONDA ACCORD SEDAN 2012 8.G Technology Reference Guide

A U T O D O O R L O C K SProgram how and when the vehicle doors automatically lock and unlock.
Default Lock SettingProgramming the Auto Door Unlock Setting
The doors are preset to
lock when your vehicle
reaches about 1\f mph.
Default Unlock Setting
Only the driver’s door is
preset to unlock when
you shift into Park (P).
Programmable Auto Door Lock\bUnlock Settings
Below are the different programmable options you can choose. See Auto Door
Locking/Unlocking in your Owner’s Manual for instructions on programming these settings.
AUTO \fOOR UNLOCK
Auto Unlock
(all doors)
When you turn
the ignition OFFWhen you shift into Park
Auto Unlock
(only driver’s door)
When you turn
the ignition OFFWhen you shift into Park
Turn off
Auto Unlock
Operate manually
AUTO \fOOR LOCK
Auto Lock
When you
reach 1\f mphWhen you shift out of Park
Turn off
Auto Lock
Operate manually
1. Close all doors. Shiftinto Park (P).
2.Turn the ignition switch to ON (II).4. Within 5 seconds\b turnthe ignition
switch to LOCK (\f).
3. Press and hold the unlock side of
the master lock switch for about 1\f
seconds. In that time\b you will hear
three clicks.
23
To program all doors to unlock when you shift to Park:
12 Accord 4D TRG\fATG_NEW STYLE 7/19/2011 3\f29 PM Page 3

R E A R V I E W C A M E R A( m o d e l s w i t h n a v i g a t i o n )
How It Works
• When you shift into Reverse (R)\b a realtime imageof the area behind your vehicle is shown in the
navigation display\b along with helpful parking guide
lines.
• Turn the guide lines off by pressing and holding CANCEL for about 3 seconds.
• The display turns off when you shift out of Reverse.
For added convenience\b the area behind your vehicle is displayed to help you navigate
while backing up.
DRIVING POSITION MEMORY SYSTEM (DPMS) (if equipped)
Store a driver’s seat position into memory for each remote transmitter.
Programming DPMS
i P o d®O R U S B F L A S H D R I V E
Play audio files from your compatible iPod or USB flash drive through your vehicle’s
audio system.
Connecting Devices and Playing Audio Files
1. Open the center console\b and pull
out the USB adapter cable.3.Press CD/AUX or AUX to begin
playing.
2. Connect the USB connector to your
iPod dock connector or flash drive.
iPod is a registered trademark of Apple Computer, Inc ., registered in the U.S. and other countries. iPod not included.
Note\b A stored memory position is linked to the corresponding keyless remote (1 or 2).
Each item begins to adjust when you unlock the driver’s door with the remote and enter
the vehicle.
1. Turn the ignition switch to
ON (II). Shiftinto Park (P).
2. Adjust your seat to the preferred
setting. 3.
Press the SET button. You will
hear a beep.
4. Press the memory button
corresponding to the remote
(1 or 2) you are using. You will
hear two beeps.
89
4. Press the SKIP buttons to change
tracks.
12 Accord 4D TRG\fATG_NEW STYLE 7/19/2011 3\f30 PM Page \b