buttons HONDA ACCORD SEDAN 2013 9.G Technology Reference Guide

1415
How It Works
O N E T O U C H T U R N S I G N A L
Use this quick and convenient method to signal a lane change.
• Lightly push the turn signallever up or down for a three
blink sequence.
• For a continuous signal\b push the lever up or down until it
locks into place.
How It Works
A U T O H E A D L I G H T S W I T H W I P E R I N T E G R A T I O N
For your safety and convenience\b your vehicle’s headlights automatically turn on when
you activate the windshield wipers.
• Make sure your headlights are in the AUTOposition.
• Turn on your windshield wipers. The headlights also turn on.
• When you turn off the windshield wipers\b the headlights turn off shortly after.
D R I V I N G P O S I T I O N M E M O R Y S Y S T E M ( D P M S )
How It Works
1. Turn on the vehicle. Make sure
the shift lever is in Park (P).3. Press SET. You will hear a beep.
4.Press the memory button
corresponding to the remote (1
or 2) you are using. You will
hear two beeps.
Note: Stored positions can also be recalled by pressing memory buttons
(1 or 2) on the door.
Store driver’s seat positions into memory for each corresponding keyless remote
(1 or 2)\b which are recalled when you unlock the driver’s door with the remote
and enter the vehicle.
2.Adjust your preferred seat
settings.
13 Accord4D TRG_TOURING\fATG_NEW\A STYLE 7/13/2012 4\f41 PM Page 9

24
25
VOICE RECOGNITION
To keep your eyes on the road and hands on the wheel, use voice commands for hands-free calling, navigation, audio, and climate control. For a full list of commands,say
“Information
” and “
Voice Help.
”
How It WorksControl four different systems with the steering wheel buttons and the ceiling microphone. To reduce the likelihood of driver distraction, certain manual functions may be inoperable or grayed out while the vehicle is moving. Voicecommands are always available.
Voice Command Portal
Voice Command Tips• To hear a list of available commands at any time, press and release the Talk button, then say “Help.” • When using the Talk button, wait for a beep, then give a command. • When the Talk button is pressed, all available voice commands are highlighted in yellow. • Speak in a clear, natural voice.• Reduce all background noise. • Adjust the dashboard and side vents away from the microphone in the ceiling. • Close the windows.
The system recognizes your command.
The system confirms the command.
Press the Talk button again, and the system waitsfor you to say a command.
When you press the Talk button from any of the main screens (NAV, PHONE, INFO, AUDIO), the voice portal screen appears and the system gives you examplesof voice commands that can be used. For more examples, see
page 26
.
Pick-Up button:
Answer an incoming
call or go to a phone-specific voiceportal screen. Hang-Up/Back button:
End a call,
decline an incoming call, or cancel anoperation. Talk button:
Give phone, navigation,
audio, or climate control commands.
13 Accord 4D TRG_TOURING_ATG_NEW STYLE 8/31/2012 11:31 AM Page 14

3031
Using HFL
B L U E T O O T H®H A N D S F R E E L I N K®
Make and receive phone calls through your vehicle’s audio system.Visit
handsfreelink.honda.comto check if your phone is Bluetoothcompatible.
To reduce the likelihood of driver distraction, certain functions may be
inoperable or grayed out while the vehicle is moving. Stop or pull over to
perform the function.
FM Traffic
Press and release the Talk button before you give a command.
Displaying Traffic Information
Say “Display traffic” to view traffic flow and icons.
Note:Traffic flow and incident icons are
only displayed on map scales of 5 miles
(8 km) or less.
Heavy traffic
Moderate traffic
Traffic
Flow
data
Traffic
Flow
data
Incident
icon
Incident
icon
Incident
Incident Icons:
Congestion
Construction
Road closed
Weather
Provides continuously updated info\b including traffic speed\b incidents\b and
construction in major metro areas. Works in cities where a clear FM traffic signal
is available.
Traffic Rerouting
The system can automatically provide detours around traffic or incidents
when a destination is set and Traffic Rerouting is turned on in Navi Settings
(see
page 45).
1. Say “Display traffic on my
route” to view a list of
incidents on your route.
4.Say “Recalculate route” to set
the new route.
3.
Say “Avoid” and the incident
list returns.
2. Say the number of the
incident you want to avoid.
PickUp button: Answer an incoming call
or go to a phonespecific voice portal
screen.
HangUp/Back button: End a call\b decline
an incoming call\b or cancel an operation.
Talk button: Make a call using a stored
voice tag\b phonebook name\b or phone
number.
Use these buttons to navigate through the HFL menus.
PHONE button: Go
to the phone screen.
BACK button:
Cancel an operation
or return to the
previous screen.
SETTINGS button:
Go to Phone Settings
to pair a phone and
set up text/mail
options. Interface Dial:
Rotate to scroll
through selections
and press to make a
selection.
MENU button:
From the Phone
screen\b access Speed
Dial\b Redial\b Call
History\b Phonebook\b
Dial\b and Text/Mail
options.
13 Accord4D TRG_TOURING\fATG_NEW\A STYLE 7/13/2012 4\f45 PM Page 17