wheel HONDA ACCORD SEDAN 2014 9.G Technology Reference Guide

1415
M U L T I V I E W R E A R C A M E R A
How It Works
For added convenience, the area behind your vehicle is displayed to help you navigate
while backing up.
Normal Top down
Wide (default)
• When you shift into Reverse (R), a real\btime image of the area behind your
vehicle is shown in the upper display, along with helpful parking guidelines.
• Press the interface dial to toggle between views.
• The display turns off when you shift out of Reverse.
Changing Settings
Turn the guidelines on or off.
\f. Press SETTINGS. Use the interface dial to make and
enter selections.
2. Select Camera Settings.
3. Select Rear Camera.
4. Select one of the options. Fixed Guidelines: Guidelines
appear when you shift into
Reverse. Select On or Off.
Dynamic Guidelines: Guidelines
move as you turn the steering
wheel. Select On or Off.
5. Press BACK to exit the menu.
L A N E W A T C HT M
Helps you check your right blind spot when you make a lane change to the right.
Visibility \brea
How It Works
When the right turn signal is activated, a camera located in the passenger side
door mirror shows the right rear area outside your vehicle on the display.
LaneWatch Display
Press the LaneWatch button on the turn signal switch to view a constant real\btime
display. Press it again to turn the display off. The display still appears when the right
turn signal is activated.
See your Owner’s Manual for information on adjusting LaneWatch settings.
Display
14 Accord 2D TRG_EXL \ANAVI_ATG_NEW STYLE \A 7/18/2013 9\f08 AM \APage 9

2021
V O I C E R E C O G N I T I O N
How It Works
The voice control system uses the steering wheel buttons and th\2e ceiling
microphone.
To reduce the potential for driver distraction, certain manual functions
may be inoperable or grayed out while the vehicle is moving. Voice
commands are always available.
Voice Command Portal
PickUp button:Answer an
incoming call or go to a phone\b
specific voice portal screen.
HangUp/Back button: End a
call, decline an incoming call, or
cancel an operation.
Talk button: Say phone,
navigation, audio, or climate
control commands.
The system recognizes
your command. The system confirms the
command.
Voice Command Tips
• When the Talk button is pressed, all available voice commands are highlighted
in yellow. To bypass the system prompts, press and release the Talk button
again to say a command.
• To hear a list of available commands at any time, press and release the Talk button, then say “Voice Help.”
• Speak in a clear, natural voice.
• Reduce all background noise.
• Adjust the dashboard and side vents away from the microphone in the ceiling.
• Close the windows.
To keep your eyes on the road and hands on the wheel, use the Talk button to
say voice commands to operate certain vehicle features.
When you press the Talk button from any of the main screens (NAV, PHONE,
INFO, AUDIO), the voice portal screen appears and the system gives you examples
of voice commands that can be used. For more examples, see page 22.
Press the Talk button
again, and the system waits
for you to say a command.
14 Accord 2D TRG_EXL \ANAVI_ATG_NEW STYLE \A 7/18/2013 9\f08 AM \APage 12

3233
B A S I C A U D I O O P E R A T I O N
Operate basic controls of your audio system using various and convenient methods.
Steering Wheel Controls
Volume increase button
Volume decreasebutton
SOURCE button:Change audio source.
tbutton:Go toprevious stationsor tracks.
ubutton:Go to nextstations or tracks.
Touchscreen Controls
Select various controls depending on the audio source being played.
FM screen shown
Source: Selectaudio sources.
Preset:Selectpreset stations.
Skip/Seek: Changestations, tracks, etc.
More:Select menuoptions and soundsettings.
USB Connection
Playing Audio Files
i P o d®O R U S B F L A S H D R I V E
Play audio files from your compatible iPod or USB flash drive through your vehicle’saudio system.
1. Connect the iPod cable or USB flash drive to the USB port in the front console(see opposite page).
2. Select Source and select the iPod or USB icon.
3. Use the touchscreen or steering wheel controls to change tracks.
iPod is a trademark of Apple, Inc .
Searching for Music
1. Press AUDIO. Use the interface dialto make and enter selections.
2. Press MENU.
3. Select Music Search.
4. Select a category or folder.
5. Select a track and press ENTER tobegin playing.
Connect the iPhone or iPod cableor a USB flash drive to the USBport in the front console.
Connect your device only when your vehicle is stopped.
Select the iPodor USB iconfrom Source.
14 Accord 2D TRG_EXL NAVI_ATG_NEW STYLE 7/18/2013 9:09 AM Page 18

3435
SONG BY VOICETM(SBV)
Play songs from your iPod and HDD from most screens by using simple voice
commands.
HARD DISC DRIVE (HDD) AUDIO
Record CDs onto your vehicle’s hard disc drive. Songs are automatically recorded once a
CD is inserted into the disc slot.
Select the HDD
icon from Source.
Playing HDD Audio
\f. Select Source and select the HDD icon. The last recorded album begins playing.
2. Use the touchscreen or steering wheel controls to change tracks.
Searching for Music
\f. Press AUDIO. Use the interface dial to make and enter selections.
2. Press MENU.
3. Select Music Search.
4. Select one of the categories.
5. Select a track and press ENTER to begin playing.
Using the “Play” Command
\f. Say “Music search.”
2. Say “Play” and a search option. For example,“Play artist XYZ” or “Play song XYZ.”
3. The system plays the first song by the artist or the specified song and returns to your
original screen.
Using the “List” Command
\f. Say “Music search.”
2. Say “List” and a search option. For example, “List artist XYZ” or “List album XYZ.”
3. A list of tracks by the artist or album is displayed. Say the number of your selection.
For example, “One.”
4. The system plays the selected song and returns to your original screen.
Press and release the Talk button before you say a command.
Press and release the Talk button before you say a command.
14 Accord 2D TRG_EXL \ANAVI_ATG_NEW STYLE \A 7/18/2013 9\f09 AM \A Page 19

3637
Play and operate Pandora from your compatible phone through your vehicle’s audio system. Visit handsfreelink.honda.comto check if this feature is compatible with yourphone. Standard data rates apply.
P A N D O R A®
Access music and information programming, locationbased services, and social mediathrough your vehicle’s audio system. Download the HondaLink app to your phone fromowners.honda.com/appsbefore using this feature. Visit handsfreelink.honda.comto check ifthis feature is compatible with your phone. Standard data rates apply.
H o n d a L i n k f e a t u r i n g A h aT M
Playing PandoraPlaying Aha
1.For Bluetooth connection: Make sure your phone is paired to Bluetooth®
HandsFreeLink®(see page 27) and the screen is on and unlocked.
For USB connection: Connect the iPhone cable to the USB port in the frontconsole (see page 32).
2. Select Source and select the aha icon. Streaming begins.
3. Use the touchscreen to like/dislike songs, and the touchscreen or steeringwheel controls to change tracks.
iPhone is a trademark of Apple, Inc .
1.For Bluetooth connection: Make sure your phone is paired to Bluetooth®
HandsFreeLink®(see page27) and the screen is on and unlocked.
For USB connection: Connect the iPhone cable to the USB port in the front console (see page 32).
2. Select Source and select the Pandora icon. Streaming begins.
3. Use the touchscreen to like/dislike songs, and the touchscreen or steeringwheel controls to change tracks.
iPhone is a trademark of Apple, Inc .
Notes:
• iPhone can connect via Bluetooth or USB; Android and BlackBerry can connectvia Bluetooth only.
• If you cannot operate Pandora through the audio system, it may be streamingthrough Bluetooth®Audio. Make sure the Pandora source on your audio system isselected.
• A popup may appear on your phone requesting you to allow access for the appto be launched.
• Operate your phone only when your vehicle is stopped.
Notes:
• iPhone can connect via Bluetooth or USB; Android can connect via Bluetoothonly.
• If you cannot operate Aha through the audio system, it may be streamingthrough Bluetooth®Audio. Make sure the Aha source on your audio system isselected.
• A popup may appear on your phone requesting you to allow access for the appto be launched.
• Operate your phone only when your vehicle is stopped.
Select the Pandora icon from Source. Select the ahaicon from Source.
Select Stations to select from16 favorite stations.
Press MENU to view thecomplete station list.
14 Accord 2D TRG_EXL NAVI_ATG_NEW STYLE 7/18/2013 9:09 AM Page 20

3\b39
B L U E T O O T H® A U D I O
Play stored or streaming audio from your compatible phone through your vehicle’s audio
system. Visit handsfreelink.honda.com to check if this feature is compatible with your phone.
Playing BluetoothAudio
\f. Make sure your phone is on and paired to Bluetooth® HandsFreeLink®(see
page 27).
2. Select Source and select the Bluetooth icon.
3. From your phone, open the desired audio player or app and begin playing. Sound is redirected to the audio system. Make sure the volume on your phone
is properly adjusted.
4. Use the touchscreen or steering wheel controls to change tracks.
H O M E L I N K® ( i f e q u i p p e d )
Program your vehicle to operate up to three remote\bcontrolled devices around your
home, such as garage doors, lighting, or home security systems.
Press and hold the button on the
remote and the HomeLink button at
the same time. Then, while
continuing to hold the HomeLink
button, press and release the button
on the remote every 2 seconds.
Does the LED blink at a faster rate within 20
seconds?
Press and hold
the HomeLink
button again. Training
complete
YES
NO
HomeLink indicator
flashes for 2 seconds,
then remains on. HomeLink LED
remains on.YES
NO
YES
NO
Position the remote transmitter you
wish to link 1–3 inches from the
HomeLink button you want to program.1
Press and hold the desired HomeLink
button and the button on the remote
transmitter.
Does the HomeLink indicator (LED) blink at a
faster rate after about 10 seconds?
2
a
The remote has a rolling code.
Press the “learn” button on the
remote-controlled device (e.g.,
garage door opener).
Press the programmed HomeLink
button again; the remote-controlled
device should operate. Within 30 seconds, press and hold
the programmed HomeLink button
for 2 seconds.a
Press and hold the programmed
HomeLink button for about a
second.
Does the device (garage door opener) work?
3
b
4
5
Training a Button
If you have any problems programming HomeLink, see the owner’s manual included
with the device you are trying to program, call HomeLink at (800) 355\b3\25\f5, or
visit www.homelink.com.
Notes:
• You may need to enable additional Bluetooth settings on your phone for playback.
• The play/pause function and remote audio controls are not supported on all phones.
• Operate your phone only when your vehicle is stopped.
Select the
Bluetooth icon
from Source.
14 Accord 2D TRG_EXL \ANAVI_ATG_NEW STYLE \A 7/18/2013 9\f09 AM \A Page 21