HONDA ACCORD TOURING 2014 9.G Technology Reference Guide

1\b19
F O R W A R D C O L L I S I O N W A R N I N G ( F C W )
Alerts you to the possibility of a frontend collision.
Changing Settings
Determine the warning timing\b or turn the system off.
1. Press SETTINGS. Use theinterface dial to make and
enter selections.
2. Select Vehicle Settings.
3. Select Forward Collision Warning Distance.
4. Select Long\b Normal\b Short\b or Off.
5. Press BACK to exit the menu.
How It Works
At 1\f mph or higher\b if the radar sensor in the front grille detects a vehicle in front of
you and the system determines a collision is likely\b the system warns you with the
following visual and audible alerts:
FCW may not activate under certain conditions. See your Owner’s Manual for more information.
Short
Normal
Long
When the FCW distance is set to Short:
• the headsup light near the windshield flash\1es continuously
• BRAKE flashes continuously
• a beep sounds continuously
until you take preventive action.
When the FCW distance is set to Normal \5or Long:
• The headsup light near the windshield flashes twi\1ce.
• If you do not take action to prevent a collision and the distance to the other vehicle becomes sufficiently close\b BRAKE flashes on the MID\b the headsup
light flashes\b and a beep sounds continuously until you take preventive action.
You can also change vehicle settings using the
multiinformation display (see page 6).
14 Accord 4D TRG_TOUR\AING_ATG_NEW STYLE \A7/10/2013 9\f39 AM \APage 11

2021
A D A P T I V E C R U I S E C O N T R O L ( A C C )Set a space interval between your vehicle and the vehicle ahead of you. When the vehicle
ahead changes speed\b ACC senses the change and increases or decreases your vehicle’s
speed to maintain a set following distance or speed.
Operating ACC
How to Use ACC
Changing Vehicle Distance
Control the distance between your vehicle and the vehicle in front of you.
Press the
Distance button
to shuffle through
four ranges.
The selected range and set speed are shown on the MID.
RangeMID Screen
Extra Long
Long
Middle
Short
If there is no vehicle ahead of
you\b a dottedline vehicle icon
appears on the MID.
Note: The ACC radar sensor in the front grille can detect and monitor the distance o\1f a
vehicle up to approximately 1\f\f yards ahead.
If a vehicle enters the ACC
range\b a beep sounds and a
vehicle icon appears on the MID.
Check the MID for
information.
Turning ACC On
1. Press MAIN.
2. ACC appears in the MID.
Using ACC
1. Accelerate to the desired speed (above 25 mph).
2. Press SET/ and release the accelerator pedal. The set speed is fixed\b and ACC begins.
3. To increase speed\b press RES/+. To decrease speed\b press SET/.
Standard Cruise Control
1. Press and hold the Distance button.
2. A beep sounds\b and the selected mode appears in the MID.
Canceling ACC
There are three ways to cancel:
• Press MAIN.
• Press CANCEL.
• Tap the brake pedal.
MAIN
Distance
CANCEL RES/+
SET/
Short range
Normal
range
Long
range
\fxtra Long
Range
ACC automatically adjusts the following distance based on the range
selected and your vehicle speed.
14 Accord 4D TRG_TOUR\AING_ATG_NEW STYLE \A7/10/2013 9\f39 AM \APage 12

Display Options
Press the Display button tochange the main displays.
PhoneShows phonescreen.
InfoShowsinformationscreen andoptions.
NavigationShows map ornavigationinformation.
AudioShows currentaudio information.
2223
I N T E L L I G E N T M U L T I I N F O R M A T I O N D I S P L A Y ( i M I D )
Choose what to display in the upper screen.
Changing the Display
U S I N G T H E T O U C H S C R E E N
Interactive touchscreen display includes audio and Bluetooth®HandsFreeLink®
functionality.
Audio Options
FM screen shown
Source: Selectaudio sources.
Preset:Selectpreset stations orchannels.
Skip/Seek: Changestations, channels,tracks, etc.
More:Select menuoptions and soundsettings.
Bluetooth®HandsFreeLink®Options*
Sound/Screen Options
When you enter the Dial screenfrom the Phone Menu, you can use the touchscreen to enterthe number.
*Manual operation is disabled while the vehicle is moving.
Select Sound Settings toadjust the audio system.Select Screen Settings toadjust various screen features.
Select More from the main screen.
When you enter the Phonebookscreen from the Phone Menu,you can use the touchscreen tosearch for names.
14 Accord 4D TRG_TOURING_ATG_NEW STYLE 7/10/2013 9:39 AM Page 13

2425
V O I C E R E C O G N I T I O N
How It Works
The voice control system uses the steering wheel buttons and th\1e ceiling
microphone.
To reduce the potential for driver distraction, certain manual functions
may be inoperable or grayed out while the vehicle is moving. Voice
commands are always available.
Voice Command Portal
PickUp button:Answer an
incoming call or go to a phone
specific voice portal screen.
HangUp/Back button: End a
call\b decline an incoming call\b or
cancel an operation.
Talk button: Say phone\b
navigation\b audio\b or climate
control commands.
The system recognizes
your command. The system confirms the
command.
Voice Command Tips
• When the Talk button is pressed\b all available voice commands are highlighted
in yellow. To bypass the system prompts\b press and release the Talk button
again to say a command.
• To hear a list of available commands at any time\b press and release the Talk button\b then say “Voice Help.”
• Speak in a clear\b natural voice.
• Reduce all background noise.
• Adjust the dashboard and side vents away from the microphone in the ceiling.
• Close the windows.
To keep your eyes on the road and hands on the wheel\b use the Talk button to
say voice commands to operate certain vehicle features.
When you press the Talk button from any of the main screens (NAV\b PHONE\b
INFO\b AUDIO)\b the voice portal screen appears and the system gives you examples
of voice commands that can be used. For more examples\b see page 22.
Press the Talk button
again\b and the system waits
for you to say a command.
14 Accord 4D TRG_TOUR\AING_ATG_NEW STYLE \A7/10/2013 9\f39 AM \APage 14

2627
Commonly Used Voice Commands
Here are some examples of commonly used voice commands. Try some of these
to familiarize yourself with the voice command system.
G e n e r a l C o m m a n d s(Accepted on most screens to change
displays)
• Display map
• Display menu
• Display phone
• Information
• Display audio screen
• What time is it?
F i n d P l a c e C o m m a n d s(Accepted on Map screen)
• Find nearest: ATM Honda dealer
gas station airport
Mexican hospital restaurant bank
post office
N a v i g a t i o n C o m m a n d s(Accepted on Map screen)
• How long/far to the destination?
• Display destination map
• Display entire route
D i s p l a y C o m m a n d s(Accepted on Map screen)
• Display (or hide): ATM
gas station
restaurant
post office
• Display north up/heading up
• Zoom in/out
• Go home
• Display current location
A u d i o C o m m a n d s(Accepted on most screens)
• Radio on
• Radio # FM/AM
• Radio preset 1/2/3/4/5/6
• XM channel #
• XM preset 1/2/3/4/5/6
• DISC play
• DISC play track #
• DISC skip forward/back
• iPod/USB/HDD play
P h o n e C o m m a n d s(Accepted on most screens)
• Call by name
• Call by number
C l i m a t e C o n t r o l C o m m a n d s(Accepted on most screens)
• Air conditioner on/off
• Rear defrost on/off
• Climate control recirculate/ fresh air
• Fan speed up/down
• Temperature # degrees (# = 57–87)
• Temperature max hot/cold
H e l p C o m m a n d s(Accepted on most screens)
• Voice help (list of all available commands by category)
Press and release the Talk button before you say a command.Press and release the Talk button before you say a command.
14 Accord 4D TRG_TOUR\AING_ATG_NEW STYLE \A7/10/2013 9\f39 AM \APage 15

2\b29
N A V I G A T I O NRealtime navigation system uses GPS and a map database to show your current
location and help guide you to a desired destination.
Calculated route
Time to go
Distance to go Next guidance
point
Current vehicle
location
Map Screen LegendEntering a Destination Using Voice Commands
For information on setting other destination options\b see your Navigation Manual.
1. Say “Address.”
2. Say “Street,” then say the street name
on the next screen. Do not include
the direction (N\b S\b E\b W) or type
(St.\b Ave.\b Blvd.\b etc.).
3. A list of street names appears. Say the number next to the street you
want to select.
4. Say the entire street address number. For example\b “123\f.” If
necessary\b say “OK” to proceed.
5. If the street address is in more than one city\b a list of city names appears.
Say the number next to the city you
want to select.
6. Say “Set as destination” to set the route.
1. From the map screen\b say “Find nearest ATM.”
2. A list of the nearest ATMs in your area is displayed by shortest distance
to destination.
3. Say the number next to the destination you want to select.
4. Say “Set as destination” to set the route.
Using the “Find Nearest” Command
Entering a Street Address
Note:
It is recommended that you enter your destination before driving or when
the vehicle is stopped.
Press and release the Talk button before you say a command.
Press and release the Talk button before you say a command.
14 Accord 4D TRG_TOUR\AING_ATG_NEW STYLE \A7/10/2013 9\f39 AM \APage 1\b

3031
Using HFL
B L U E T O O T H® H A N D S F R E E L I N K®
Make and receive phone calls through your vehicle’s audio system. Visit handsfreelink.honda.comto check if this feature is compatible with your phone.
To reduce the potential for driver distraction, certain functions may beinoperable or grayed out while the vehicle is moving. Stop or pull over toperform the function.
PickUp button:Answer anincoming call or go to a phonespecific voice portal screen.
HangUp/Back button:End acall, decline an incoming call, or cancel an operation.
Talk button: Make a call using a stored voice tag, phonebook name,or phone number.
Use these buttons to navigate through the HFL menus.
PHONE button: Go to the phone screen.
BACK button: Cancel an operationor return to theprevious screen.
SETTINGS button: Go to Phone Settingsto pair a phone andset up text/emailoptions.
Interface Dial:Rotate to scrollthrough selectionsand press to make aselection.
MENU button: From the Phonescreen, access SpeedDial, Redial, CallHistory, Phonebook,Dial, and Text/EMailoptions.
FM Traffic
Displaying Traffic Information
Say “Display traffic”to view traffic flow and incident icons.
Note:Traffic flow and incident icons aredisplayed on map scales of 5 miles or less.
Heavy traffic
Moderate trafficIncident
I n c i d e n t I c o n s
Congestion
Construction
Road closed
Weather
1. Say “Display traffic on my route”toview a list of incidents on your route.
2. Say the number of the incident youwant to avoid.
3. Say “Avoid”and the incident listreturns.
4. Say “Recalculate route”to set thenew route.
Traffic ReroutingTM
The system can automatically provide detours around traffic or incidentswhen a destination is set and Traffic Rerouting is turned on in Navi Settings(see page 10), or you can manually reroute.
Provides continuously updated information, including traffic speed, incidents, andconstruction in major metro areas.
IncidenticonIncidenticon
TrafficFlowdata
TrafficFlowdata
Press and release the Talk button before you say a command.
14 Accord 4D TRG_TOURING_ATG_NEW STYLE 7/10/2013 9:39 AM Page 17

3233
Use the interface dial to make and enter selections.
Pairing Your Phone
Pair your phone when the vehicle is stopped to begin using handsfree phone and
related audio functions.
1. Press SETTINGS.
2. Select Phone Settings.
3. Select Bluetooth Device List (if no phone has been paired) or Connect
Phone (if pairing an additional phone).
4. Select Add Bluetooth Device.
5. Make sure your phone is in discovery mode and select OK.
6. HFL searches for your phone. Select your phone when it appears on the
list.
If your phone does not appear:
Select Phone Not Found and search
for HandsFreeLink from your phone.
7. HFL gives you a sixdigit code. Compare it to the code that appears
on your phone. Connect to HFL from
your phone.
8. The system asks if you want to enable Phone Synchronization. Select On to
automatically import contacts and call
history.
Receiving a Call
A notification is heard and the incoming call information appears on the display.
Press the Hang
Up button to
end or decline
the call.
Press the Pick
Up button to
answer the call.You can also select the icons
on the touchscreen.
Using Voice Commands
Use the interface dial to make and enter selections.
Dialing a Number
Enter a 1\fdigit phone number to call.
Using the Menu*
*Manual operation is limited while the vehicle is moving. Voice commands are always available.
1. Press PHONE.
2. Press MENU.
3. Select Dial.
4. From the navigation screen or the touchscreen\b enter the phone number.
Select the green phone icon to call.
1. Say “Dial by number.”
2. Say the phone number. For example\b “31\b555123\f.”
3. The system begins to dial.
Use the interface dial to make and enter selections.
Using Speed Dial and Call History
Store 2\f speed dial entries for quick calling\b or view the last 2\f calls.
1. Press PHONE.
2. From the Speed Dial tab\b scroll through the list to find the entry you
want to call\b and select it to call.
For Call History\b move the interface
dial to the right and scroll through
the list.
Press and release the Talk button before you say a command.
14 Accord 4D TRG_TOUR\AING_ATG_NEW STYLE \A7/10/2013 9\f39 AM \APage 18

3435
Use the interface dial to make and enter selections.
Using the Phonebook
When your phone is paired, its entire phonebook is automatically imported to the system. Phone synchronization must be on for this feature to work.
Using Voice Commands
Using the Menu*
*Manual operation is limited while the vehicle is moving. Voice commands are always available.
1. Press PHONE.
2. Press MENU.
3. Select Phonebook.
4. Scroll through the list to find the nameand number you want to call, and select it to call.
1. Say “Call by name.”
2. Say the phonebook name and phonetype. For example, “John Smith mobile.”
S M S T E X T M E S S A G I N G A N D E M A I L
Use the interface dial to make and enter selections.
Receiving Messages
Use the interface dial to make and enter selections.
Replying to Messages
Receive and send text messages and emails from your paired and linked phone using Bluetooth®HandsFreeLink®. Visit handsfreelink.honda.comto see if this feature iscompatible with your phone. Standard message rates apply. This feature is limitedwhile the vehicle is moving.
1. A notification appears on the display.Select Read to open the message.
2. The message is displayed, and thesystem reads it aloud.
1. With the message open, select Reply.
2. Select one of the six available replymessages.
3. Select Send to send the message.
Note:Notifications and operation for SMS Text and Email are separate. Choose yourdesired account in Phone Settings (see page 10).
Use the interface dial to make and enter selections.
Calling the Sender
1. With the message open, select Call.
2. The system begins dialing the number.
Press and release the Talk button before you say a command.
14 Accord 4D TRG_TOURING_ATG_NEW STYLE 7/10/2013 9:39 AM Page 19

3637
B A S I C A U D I O O P E R A T I O N
Operate basic controls of your audio system using various and convenient methods.
Steering Wheel Controls
Volume increase button
Volume decreasebutton
SOURCE button:Change audio source.
tbutton:Go toprevious stationsor tracks.
ubutton:Go to nextstations or tracks.
Touchscreen Controls
Select various controls depending on the audio source being played.
FM screen shown
Source: Selectaudio sources.
Preset:Selectpreset stations.
Skip/Seek: Changestations, tracks, etc.
More:Select menuoptions and soundsettings.
Connect the iPhone or iPod cableor a USB flash drive to the USBport in the front console.
Connect your device only whenyour vehicle is stopped.
USB Connection
Select the iPodor USB iconfrom Source.
Playing Audio Files
i P o d®O R U S B F L A S H D R I V E
Play audio files from your compatible iPod or USB flash drive through your vehicle’saudio system.
1. Connect the iPod cable or USB flash drive to the USB port in the front console(see opposite page).
2. Select Source and select the iPod or USB icon.
3. Use the touchscreen or steering wheel controls to change tracks.
iPod is a trademark of Apple, Inc .
Searching for Music
1. Press AUDIO. Use the interface dialto make and enter selections.
2. Press MENU.
3. Select Music Search.
4. Select a category or folder.
5. Select a track and press ENTER tobegin playing.
14 Accord 4D TRG_TOURING_ATG_NEW STYLE 7/10/2013 9:40 AM Page 20