HONDA INSIGHT 2010 2.G Owners Manual

You can cancel cruise control in any
of these ways:Push the CANCEL button on the
steering wheel.
Push the CRUISE button on the
steering wheel. Tap the brake pedal. Pressing the CRUISE button turns
the system off and erases the
previous cruising speed. When you push the CANCEL button,
or tap the brake pedal, the system
will remember the previously-set
cruising speed. To return to that
speed, accelerate to above 25 mph
(40 km/h) and then press and
release the RES/ACCEL button. The
CRUISE CONTROL indicator comes
on. The vehicle will accelerate to the
same cruising speed as bef ore.
Tapping either of the paddle shif ters
shif ts the speed up or down, but does
not cancel the cruise control. For
more information on driving with
paddle shif ters, see page .
316
EX models onlyCanceling Cruise Control Resuming the Set Speed
Cruise Control
258
CRUISE BUTTON
CANCEL
BUTTON
—
—y

y
)"yy
2010 Insight

µµ
Bluetooth
HandsFreeLink(HFL)
allows you to place and receive
phone calls using voice commands,
without handling your cell phone.
Press and
release to give a command or answer
a call.
Press and
release to end a call, go back to the
previous command, or cancel the
command.
To use HFL, you need a Bluetooth-
compatible cell phone. For a list of
compatible phones, pairing
procedures, and special f eature
capabilities:
In the U.S., visit
or call (888) 528-7876.
In Canada, visit or call
(888) 9-HONDA-9.
handsf reelink.honda.
com
www.honda.ca,
CONT INUED
On models wit h navigat ion syst em HFL Buttons
BluetoothHandsFreeL ink
Using HFL
HFL Talk button
HFL Back button
Features
259
HFL BACK BUTTON
NAVI VOICE
CONTROL
BUTTONS
HFL TALK
BUTTON
—
—y

y
)"yy
2010 Insight

Try to reduce all background
noise. If the microphone picks up
voices other than yours,
commands may be misinterpreted.Many commands can be spoken
together. For example, you can
say ‘‘Call 123-456-7890’’ or ‘‘Dial
Peter.’’
Press and release the HFL Talk
button each time you want to
make a command. Af ter the beep,
speak in a clear, natural tone.
When HFL is in use, navigation
voice commands cannot be
recognized.
To change the volume level of
HFL, use the audio system volume
knob or the steering wheel volume
controls.
Airorwindnoisefromthe
dashboard and side vents and
windows may interfere with the
microphone. Adjust or close them
as necessary.
BluetoothHandsFreeL ink
Voice Cont rol T ips
260
MICROPHONE
—
—y

y
)"yy
2010 Insight

CONT INUED
To hear general HFL inf ormation,
including help on pairing a phone
or setting up the system, say
‘‘Tutorial.’’
For help at any time, including a
list of available commands, say
‘‘Hands f ree help.’’As an incoming call notif ication, you
will see the f ollowing display:
The Bluetooth icon will also
appear on the audio display when a
phone is linked. Some phones may send battery,
signal strength, and roaming status
inf ormation to HFL.
BluetoothHandsFreeL ink
Help Features
Inf ormation Display
Features
261
ROAM STATUSHFL
MODE
PHONE DIALING BATTERY LEVEL
STATUS
SIGNAL STRENGTH
—
—y

y
)"yy
2010 Insight

A notif ication that there is an
incoming call, or HFL is in use, will
appear on the navigation screen
when the audio system is on.When there is an incoming call, or
HFL is in use, ‘‘HFL’’ will appear at
the bottom of the map screen.
BluetoothHandsFreeL ink
262
HFL MESSAGE
—
—y

y
)"yy
2010 Insight

ÌÌÌÌ
CONT INUED
BluetoothHandsFreeL ink
How to Use HFL
Features
263
‘‘Phone Setup’’
‘‘Call’’ or ‘‘Dial’’‘‘Pair’’
‘‘Edit’’
‘‘Delete’’
‘‘Jim Smith’’
‘‘Set Pairing
Code’’
The ignition switch must be in the ACCESSORY (I) or ON (II) position.
‘‘List’’‘‘Status’’
‘‘Next Phone’’ Hear a list of all phones paired to the system (See page
267)
Delete a paired phone from the system (See page
267)
Edit the name of a paired phone (See page
267)
Pair a phone to the system (See page
266)
Hear which paired phone is currently linked to the system
(See page 268)
Search for another previously paired phone to link to (See page 268)
Set the pairing code to a ‘‘Fixed’’ or ‘‘Random’’ number
(See page 268)
Once a phonebook entry is stored, you can say a name here.
(See page 269)
‘‘123-555- ’’ Enter desired
phone number (See page269)
Press HFL
Talk button
Press and release the HFL Talk button each time you give a command.
—
—y
y
)"yy
2010 Insight

BluetoothHandsFreeL ink
264
‘‘Redial’’
‘‘Transfer’’
‘‘Mute’’
‘‘Send’’‘‘Phonebook’’ ‘‘Store’’
‘‘Edit’’
‘‘Delete’’
‘‘Receive Contact’’
‘‘List’’
Transfer a call from HFL to your phone, or from your phone to HFL (See page
272)
Redial the last number called (See page
270)
Mute your voice to the person at the other end of the call (See page 272)
Send numbers or names during a call (See page 272)
Store a phonebook entry (See page 273)
Edit the name of an existing phonebook entry (See page 273)
Delete a phonebook entry (See page 274)
If your phone supports this function, use this to transfer contacts from
your phone to HFL (See page 274)
Hear a list of all stored phonebook entries (See page 274)
Press HFL
Talk button
Press and release the HFL Talk button each time you give a command.
—
—y

y
)"yy
2010 Insight

Î
Î
CONT INUED
BluetoothHandsFreeL ink
Features
265
‘‘Change Language’’‘‘Hands Free Help’’
‘‘System
Set up’’
‘‘Tutorial’’ ‘‘Clear’’
‘‘Auto Transfer’’ ‘‘Call Notification’’ ‘‘Security’’
‘‘Change Passcode’’
Hear a list of available commands and additional information describing each command
(See page 261)
Hear a tutorial for general rules on using the system (See page
261)
Apply a security passcode to the system that must be input at each key
cycle to access the system (See page
279)
Change your security passcode (See page 280)
Clear the system of all paired phones, phonebook entries and security
passcode (See page 281)
Set how you would like to be notified of an incoming call
(See page
280)
Press HFL
Talk button
Press and release the HFL Talk button each time you give a command. Set calls to automatically transfer from your phone to HFL when you
enter the vehicle (See page
280)
Change language from English to French (See page 282)
: Canadian models
—
—y

y
)"yy
2010 Insight

To use HFL, you need to pair your
Bluetooth-compatible cell phone to
the system.This command group is available f or
paired cell phones.
You cannot pair your phone while
the vehicle is moving.
Your phone must be in discovery
or search mode to pair. Ref er to
your phone’s manual.
Up to six phones can be paired.
Your phone’s battery may drain
f aster when it is paired to HFL.
If af ter three minutes your phone
is not ready to pair or a phone is
not f ound, the system will time out
andreturntoidle. Press and release the HFL Talk
button. If you are pairing a phone
f or the f irst time, HFL will give
you inf ormation about the pairing
process. If it is not the f irst phone
you are pairing, say ‘‘
’’ and say ‘‘ .’’
Follow the HFL prompts and put
your phone in discovery or search
mode. HFL will give you a 4-digit
pairing code and begin searching
foryourphone.
When your phone f inds a
Bluetooth device, select HFL f rom
the options and enter the 4-digit
code f rom the previous step.
Follow the HFL prompts and
name the newly paired phone.
1.
2.
3.
4.
Phone Setup
Phone
setup Pair
Phone pairing tips T o pair a cell phone:
BluetoothHandsFreeL ink
266
—
—y
y
)"y
y
2010 Insight

Say ‘‘.’’
Say‘‘ ’’aftertheprompts.
If there is more than one phone
paired to the system, HFL will ask
you which phone’s name you want
to change. Follow the HFL
prompts and rename the phone.
Press and release the HFL Talk
button bef ore a command.
Press and release the HFL Talk
button bef ore a command.
Say ‘‘ .’’
Say‘‘ ’’aftertheprompts.
HFL will ask you which phone you
want to delete. Follow the HFL
prompts to continue with the
deletion. Press and release the HFL Talk
button bef ore a command.
HFLwillreadoutallthepaired
phone’s names. Say‘‘ ’’aftertheprompts. Say ‘‘ .’’
1.
2.
3.
3. 1.
2.1.
2.
3.
CONT INUED
Phone setup
EditPhone setup
Delete
List Phone setup
To hear the names of all paired
phones:
T o rename a paired phone:
T o delet e a paired phone:
BluetoothHandsFreeL ink
Features
267
—
—y

y
)"yy
2010 Insight