change time HONDA ODYSSEY 2014 RC1-RC2 / 5.G Technology Reference Guide

Page 10 of 25

Helps you check your right blind spot when you make a lane change to the right.
Available on Touring.
1617
L A N E W A T C HT M
Visibility Area
How It Works
When the right turn signal is activated\b a camera located in the passenger side
door mirror shows the right rear area outside your vehicle on the display.
Display
C O O L B O X
Store beverages in a conveniently located box to keep them cool.
Usage Tips
• The Cool Box is not a refrigerator or cooler. It does not cool down warm drinks.
• Do not use ice.
• Do not store perishable items inside for an extended amount of time.
• Keep the box closed for best results.
• The box cannot be removed for cleaning.
• Because the air conditioning system is always on when the Cool Box is in use\b fuel economy may be slightly reduced.
• If the ignition switch is turned to LOCK (\f)\b the box maintains its temperature for one hour.
How It Works
• Store up to four 2\founce bottles or six 12ounce cans. Keep already cold drinks from becoming warm.
• Press COOL BOX to turn the system on or off. A green indicator light appears when the Cool Box is on. Cold air from the air conditioning
system flows into and circulates within the box.
LaneWatch Display
Press the LaneWatch button on the turn signal switch to view a constant realtime
display. Press it again to turn the display off. The display still appears when the right
turn signal is activated.
See your Owner’s Manual for more information on adjusting LaneWatch settings.
14 Odyssey TRG_TOURIN\AG_ATG_NEW STYLE 4/\A25/2013 2\f37 PM P\Aage 10

Page 13 of 25

I N T E L L I G E N T M U L T I I N F O R M A T I O N D I S P L A Y ( i M I D )
Choose what to display in the upper screen.
2223
Info
Shows trip
computer and
other options.
Display Options
Audio*
Shows current
audio information. Navigation
Shows map or navigation
information.
Changing the Display
Phone
Shows phone screen.
H O M E L I N K®
Program your vehicle to operate up to three remotecontrolled devices around your
home\b such as garage doors\b lighting\b or home security systems.
Press and hold the button on the
remote and the HomeLink button at
the same time. Then, while
continuing to hold the HomeLink
button, press and release the button
on the remote every 2 seconds.
Does the LED blink at a faster rate within 20 seconds?
Press and hold
the HomeLink
button again. Training
complete
YES
NO
HomeLink indicator
flashes for 2 seconds,
then remains on. HomeLink LED
remains on.YES
NO
YES
NO
Position the remote transmitter you
wish to link 1–3 inches from the
HomeLink button you want to program.1
Press and hold the desired HomeLink
button and the button on the remote
transmitter.
Does the HomeLink indicator (LED) blink at a
faster rate after about 10 seconds?
2
a
The remote has a rolling code.
Press the “learn” button on the
remote-controlled device (e.g.,
garage door opener).
Press the programmed HomeLink
button again; the remote-controlled
device should operate.
Within 30 seconds, press and hold
the programmed HomeLink button
for 2 seconds.a
Press and hold the programmed
HomeLink button for about a
second.
Does the device (garage door opener) work?
3
b
4
5
Training a Button
If you have any problems programming HomeLink\b see the owner’s manual included
with the device you are trying to program\b call HomeLink at (8\f\f) 35535\115\b or
visit www.homelink.com.
*Front audio information is shown by default. Press REAR AUDIO to display rear audio information.
Press the display
button to change
the main displays.
You can also press
each display’s
corresponding
button on the
audio system.
14 Odyssey TRG_TOURIN\AG_ATG_NEW STYLE 4/\A25/2013 2\f38 PM P\Aage 13