reset HONDA PILOT 2014 2.G User Guide

91
uu Gauges and Displays u Multi-Informat ion Display *
Continued
Instrument Panel
■Customization flow
Press the / button.
SEL/RESET
CUSTOMIZE SETTINGS
SECURITY RELOCK TIMER
TRIP A INFO RESET
LANGUAGE SELECTION
ADJUST OUTSIDE TEMP. DISPLAY
MEMORY POSITION LINK
INTERIOR LIGHT DIMMING TIME
HEADLIGHT AUTO OFF TIMER
AUTO LIGHT SENSITIVITY
AUTO DOOR LOCK
AUTO DOOR UNLOCK
KEY AND REMOTE UNLOCK MODE
KEYLESS LOCK ACKNOWLEDGMENT
METER SETUP
POSITION SETUP
LIGHTING SETUP
DOOR/WINDOW SETUP
SEL/RESET
SEL/RESET
SEL/RESET
SEL/RESET
PTG KEYLESS OPEN MODE *
EXIT
CHG SETTING
DEFAULT ALL
EXIT
SEL/RESET
SEL/RESET
SEL/RESET
* Not available on all models

92
uu Gauges and Displays u Multi-Information Display *
Instrument Panel
■List of customizable options
*: Default Setting
Setup Group Customizable Features DescriptionSelectable Settings
METER
SETUP
LANGUAGE SELECTIONChanges the displayed language.ENGLISH*/FRENCH /SPANISH
ADJUST OUTSIDE TEMP.
DISPLAYAdjusts the temperature reading by a few degrees.-5°F ~ ±0°F* ~ +5°F (U.S.)
-3°C ~ ±0°C* ~ +3°C (Canada)
TRIP A INFO RESET
Changes the setting of how to reset trip meter A,
average fuel economy A, average speed A, and
elapsed time A.with REFUEL /
MANUAL ONLY*/ IGN OFF
POSITION
S
ETUP MEMORY POSITION LINK
Changes the driver's seat
and the outside mirror
positions to a stored setting. ON*/
OFF
LIGHTING
SETUP
INTERIOR LIGHT
DIMMING TIMEChanges the length of time the interior lights stay on
after you close the doors.60 sec/ 30 sec*/15 sec
HEADLIGHT AUTO OFF
TIMERChanges the length of time the exterior lights stay
on after you close the driver's door.60 sec/ 30 sec/15 sec*/0 sec
AUTO LIGHT SENSITIVITYChanges the timing for the headlights to come on.MAX /HIGH /MID*/ LOW /MIN

93
uu Gauges and Displays u Multi-Informat ion Display *
Continued
Instrument Panel
*1:Not available on all models
*2: Default SettingSetup Group
Customizable Features DescriptionSelectable Settings
DOOR/
WINDOW
SE
TUP AUTO DOOR LOCK
Changes the setting for
the automatic
locking
feature. SHIFT FROM
(P
/WITH VEH
SPEED*2/ OFF
AUTO DOOR UNLOCK Changes the setting for when the doors unlock
automatica

lly. SHIFT TO
(P
*2/IGN OFF /OFF
DRIVER DOOR
*2/ ALL DOORS
KEY AND REMOTE
UNLOCK MODE Sets up either the driver's door or all doors to unlock
on the first push

of the remote transmitter. DRIVER DOOR*2/
ALL DOOR
KEYLESS LOCK
ACKN
OWLEDGMENT LOCK/UNLOCK- The exterior
ligh ts flash. LOCK (2nd
push)- The beeper sounds. ON*2/
OFF
SECURITY RELOCK TIMER Changes the time it takes for the doors to relock and
the secur

ity system to set after you unlock the
vehicle without opening any door. 90 sec
/60 sec/ 30 sec*2
PTG KEYLESS OPEN
MODE*1Changes the keyless setting for when the power
tailgate opens. ANYTIME*2 / WHEN
UNLOCKED
DEFAULT
ALLCancels/Resets all the customized settings as
default.CANCEL*2/ SET

94
uu Gauges and Displays u Multi-Information Display *
Instrument Panel
■Example of customization settings
The steps for changing the TRIP
A INFO RESET setting to with REFUEL are shown
below. The default setting for TRIP A INFO RESET is MANUAL ONLY .
1. Press and
release / button until
CUSTOMIZE SETTINGS appear
s on the
display.
2. Press the SEL/
RESET button.
u CHG SE
TTING appears on the display.
3. Press the SEL/RES
ET button to go into the
METER SETUP group.
4. Press the SEL/
RESET button again.
u LA
NGUAGE SELECTION appears first
on the display.

95
uu Gauges and Displays u Multi-Informat ion Display *
Instrument Panel
5.Press the / button until TR IP A
INFO RESET appea
rs on the display, then
press the SEL/RESET button.
u Th
e display switches to the setup screen,
where you can select with REFUEL,
MANUAL ONLY , IGN OFF, or EXIT .
6. Press the / button and select wi
th
REFUEL , then pr
ess the SEL/RESET button.
u The
with REFUEL setup screen appears,
then the display retu rns to the customize
item screen.
7. Press the / button until EX
IT
appears on the display, then press the SE
L/
RESET button.
8. Repeat
Step 7 until you return to the
normal screen.

130
uu Operating the Switches Around the Steering Wheel u Brightness Control
Controls
Brightness Control
When the ignition switch is in ON (w
, you can
use the brightness control knob to adjust
instrument panel brightness.
Brighten: Turn the knob to the right.
Dim: Turn the knob to the left.
You will hear a beep when the brightness
reaches minimum or
maximum. The
information display
*/multi-information
display * will return to its original state several
seconds after you adjust the brightness.
■Brightness level indicator
The brightness level is shown on the
info
rmation display */multi-information
display * while you are adjusting it.
1Brightness Control
Instrument panel brightne ss varies, depending on
whether the exterior lights are on or off. The
instrument panel dims to reduce glare when they are
on.
Pressing the (Select/Reset) knob or the /
(information) button
* switches the display.
If you turn the knob to the right until the brightness
display is up to max, the beeper sounds. This cancels
the reduced instrument panel brightness when the
exterior lights are on.
Control Knob
On multi-information display
On information display
* Not available on all models

132
uu Operating the Switches Around the Steering Wheel u Driving Position Memory System *
Controls
Driving Position Memory System *
You can store two driver’s seat and door mirror positions with the driving position
memory system.
When you unlock and open the driver’s door with a remote transmitter, the seat and
door mirrors adjust

automatically to one of the two preset positions.
The multi-information display shows you which remote transmitter you used to
un
lock the vehicle when you enter.
• Driver 1 transmitter
is linked to memory button 1.
• Driver 2 transmitter
is linked to memory button 2.
1Driving Position Memory System *
Using the multi-information display, you can disable
the automatic seat adjustment function. 2 Customized Features P. 90
The customize setting is also stored by the Driver 1
and 2 transmitters. What setting is recalled next time
depends on which transmitter you use to unlock and
open the driver's door.
Driver 1 Driver 2
* Not available on all models

Continued177
uu Audio System Basic Operation u Audio/Information Screen *
Features
Shows the current audio information.
2 Audio System Basic Operation P. 175
Shows the instant fuel economy, averag e fuel economy, distance (trip meter),
average speed, elapsed time, and range.
2 Instant Fuel Economy P. 82
2 Trip Meter P. 82
2 Range P. 82
■Average speed
Shows the average speed in mph (U.S.) or km/h (Canada).
■Elapsed time
Shows the time during one drive cycle.
Shows a clock screen or an image you import.
2 Wallpaper Setup P. 179
Minimizes the display by only showing the compass, audio status, and clock on the
upper part of the display.
■Audio Display
■Trip Computer
■Wallpaper
■Minimum Display
1 Trip Computer
You can reset the trip computer.
2 Trip Computer P. 88

181
uu Audio System Basic Operation u Audio/Information Screen *
Continued
Features
You can reset all data on the trip computer.
1. Press the SETUP button.
2. Ro
tate to select Trip Computer Reset ,
then press .
3. Ro
tate to Trip A or Trip B , then press
.
u Th
e confirmation message will appear.
4. Ro
tate to select Yes, then press to
reset completely.
■Trip Computer Reset

184
uu Audio System Basic Operation u Audio Remote Controls
Features
Audio Remote Controls
Allows you to operate the audio system while driving.
MODE Button
Cycles through the audio modes as follows:
FM1FM2 AM XM1
*XM2 *CD CD-L
 AU
X
VOL Button
Press : Increases the volume.
Press : Decreases the volume.
CH Button
• When list
ening to the radio
Press
(+
: Selects the next preset radio station.
Press
(-
: Selects the previous pr eset radio station.
Press and hold
(+
: Selects the next strong station.
Press and hold
(-
: Selects the previous strong station.
• When list
ening to a CD, CD Library, iPod ® or USB flash drive.
Press
(+
: Skips to the next song.
Press
(-
: Goes back to the beginning of the current or previous song.
• W
hen listening to a CD or CD Library.
Press and hold
(+
: Skips to the next folder/album.
Press and hold
(-
: Goes back to the previous folder/album.
1 Audio Remote Controls
The CD mode appears only when a CD is loaded.
When in AUX mode, the following are operable from
the remote controls:
•iPod ®/USB flash drive connected to the USB
adapter cable
•Bluetooth ® Audio (with some phones only)
MODE
Button
CH
(Channel)
ButtonVOL
(Volume)
Button
3
4
* Not available on all models