phone HONDA RIDGELINE 2012 1.G Technology Reference Guide

V O I C E R E C O G N I T I O N( m o d e l s w i t h n a v i g a t i o n )To keep your eyes on the road and hands on the wheel, use voice commands for
handsfree calling, navigation, audio, and climate control\b For a full list of commands, say
“Information ” and “Voice Command Help. ”
Key Functions by Voice Command
C L I M A T Ep\b 15
N A V I G A T I O Np\b 16
B L U E T O O T H® H A N D S F R E E L I N K®p\b 18
A U D I Op\b 15
Control four different systems with the steering wheel buttons and the ceiling
microphone\b
Voice Command Tips
• Press and release
the HFL or Navi Talk button, wait for a beep, then give a
command\b
• For a list of available HFL commands, press and release
the HFL Talk button
and say “Handsfree help.”
• For a list of available navigation commands, press and release the Navi Talk
button and say“Help.”
• Speak in a clear, natural voice\b
• Reduce all background noise\b
• Adjust the dashboard and side vents away from the microphone in the ceiling\b
• Close the windows\b
HFL Talk button\b Give HFL commands or
answer incoming calls\b
Navi Talk button\b Give navigation, audio,
and climate control commands\b
Navi Back button\b Cancel a command or
return to the previous screen\b
HFL Back button\b End a call, go back to
the previous command, or cancel an
operation\b
1011
12 Ridgeline TRG\fATG_NEW STYLE 9/15/2011 8\f4\b AM Page 7

B L U E T O O T H® H A N D S F R E E L I N K®( m o d e l s w i t h n a v i g a t i o n )Place and receive phone calls through your vehicle’s audio system\b Visit
handsfreelink.honda.com to check if your phone is compatible with the system\b
Pairing Your Phone
Press and release the HFL Talk button before you give a command\b
Press and release the HFL Talk button before you give a command\b
Making a Call
1\b Pressthe HFL Talk button\b
\f\b Say “Call” or “Dial” and the
desired phone number\b 3\b Say
“Call”or “Dial” to continue\b
Receiving a Call
\f\b Press the HFL Talk button to
accept the call\b
3\b Press the HFL Back button to
end or decline the call\b
4\b The call is connected and heard through the vehicle’s speakers\b
1\b A notification is heard andthe incoming phone number
appears on the MID\b
HFL Talk button\b Give HFL
commands or answer incoming calls\b
HFL Back button\b End a call, go back
to the previous command, or cancel an
operation\b
181\f
1\b Enable “Discovery” or
“Search” mode on your
compatible phone\b
\f\b Say “Phone setup,” then say
“Pair.”
3\b HFL gives you a fourdigit code that appears on the
MID\b 5\b HFL asks you to name the
phone\b For example, say
“Mary’s phone.” The phone is
now added\b
4\b Search for HandsFreeLink
from your phone, and enter
the code when prompted\b
Connect to HFL\b
12 Ridgeline TRG\fATG_NEW STYLE 9/15/2011 8\f48 AM Page 11

Press and release the HFL Talk button before you give a command\b
HFL Phonebook
1\b Say “Phonebook.”
Store up to 50 names and their phone numbers, which can be used
as speed dials\b
\f\b Say “Store.” 3\b Say
the name of the contact,
and then the phone number\b
4\b To call a contact once an entry is stored, say“Call Mike.”
Press and release the Navi Talk button before you give a command\b
Cellular Phonebook *
1\b Say “Display Information.”
Say “Cellular Phone.”
Import your entire cell phone’s address book to the navigation system\b
*not available on all phones
\f\b Say
“Import Cellular
Phonebook.” 3\b HFL begins to import your
contacts to the system\b4\b To call a contact, say“Search
Imported Phonebook” and select
the name and number\b
H O M E L I N K®( i f e q u i p p e d )
The HomeLink Universal Transceiver can be programmed to operate up to three
remotecontrolled devices around your home, such as garage doors, lighting, or home
security systems\b
Press and hold the button on the
remote and the HomeLink button at
the same t ime. Then, while
continuing to hold the HomeLink
button, press and release the button
on the remote every 2 seconds.
Does the LED blink at a faster rate within 20
seconds?
Press and hold
the HomeLink
button again. Training
complete
YES
NO
HomeLink indicator
flashes for 2 seconds,
then remains on. HomeLink LED
remains on.YES
NO YES
NO
Position the remote transmitter you
wish to link 1–3 inches from the
HomeLink button you want to program.1
Press and hold the desired
HomeLink button and the button on
the remote transmitter.
Does the HomeLink indicator (LED) blink at a
faster rate after about 10 seconds?
2
a
The remote has a rolling code.
Press the “learn” button on the
remote-controlled device (e.g.,
garage door opener).
Press the programmed HomeLink
button again; the remote-controlled
device should operate. Within 30 seconds, press and
hold the programmed HomeLink
button for 2 seconds.a
Press and hold the programmed
HomeLink button for about a
second.
Does the device (garage door opener) work?
3
b
4
5
Training a Button
If you have any problems programming HomeLink, see the owner’s manual included
with the device you are trying to program, call HomeLink at (800) 35535\315, or
visit www.homelink.com \b
2021
12 Ridgeline TRG\fATG_NEW STYLE 9/15/2011 8\f48 AM Page 12