differential HUMMER H2 2007 Owners Manual

How to Check Lubricant
To get an accurate reading, the vehicle should be
on a level surface.
When the differential is cold, the proper level is
from 5/8 inch to 1-5/8 inch (15 mm to 40 mm)
below the bottom of the ller plug hole, located on
the rear axle. Add only enough uid to reach
the proper level.
What to Use
Refer to the Maintenance Schedule to determine
what kind of lubricant to use. SeeRecommended
Fluids and Lubricants on page 528.
Four-Wheel Drive
Transfer Case
It is not necessary to regularly check transfer case
uid unless you suspect there is a leak or you
hear an unusual noise. A uid loss could indicate
a problem. Have it inspected and repaired.
Refer to the Maintenance Schedule to determine
how often to change the lubricant. See
Scheduled Maintenance on page 517.
438

Front Axle
When to Check and Change Lubricant
It is not necessary to regularly check front axle
uid unless you suspect there is a leak or you hear
an unusual noise. A uid loss could indicate a
problem. Have it inspected and repaired.
How to Check Lubricant
To get an accurate reading, the vehicle should be
on a level surface.
When the differential is cold, the proper level is
from about 1/4 inch (6 mm) to about 3/8 inch
(10 mm) below the ller plug hole.
What to Use
Refer to the Maintenance Schedule to determine
what kind of lubricant to use. SeeRecommended
Fluids and Lubricants on page 528.
440