engine Hyundai Creta 2016 Manual PDF

4-5
Multimedia System
4
How vehicle audio works
AM and FM radio signals are broad-
cast from transmitter towers located
around your city. They are intercept-
ed by the radio antenna on your vehi-
cle. This signal is then processed by
the radio and sent to your vehicle
speakers.
When a strong radio signal has
reached your vehicle, the precise
engineering of your audio system
ensures the best possible quality
reproduction. However, in some
cases the signal coming to your vehi-
cle may not be strong and clear.This can be due to factors, such as
the distance from the radio station,
closeness of other strong radio sta-
tions or the presence of buildings,
bridges or other large obstructions inthe area.
AM broadcasts can be received at
greater distances than FM broad-
casts. This is because AM radio
waves are transmitted at low fre-
quencies. These long distance, low
frequency radio waves can follow the
curvature of the earth rather than
travelling straight. In addition, they
curve around obstructions resulting
in better signal coverage.
JBM001
FM reception
JBM002
AM reception

4-13
Multimedia System
4
Information - Using the USB
device
 Connect the USB device after turn- ing on the engine. The USB device
may become damaged if it is already
connected when the ignition is
turned on.The USB device may not
operate properly if the car ignition
is turned on or off with the USB
device connected.
 Heed caution to static electricity when connecting/disconnecting USB
devices.
 Encoded MP3 Players will not be recognized when connected as an
external device.
 When connecting an external USB device, the device may not properly
recognize the USB is in some states.
 Only products formatted with byte/sectors under 64Kbyte will be
recognized.
 This device recognizes USB devices formatted in FAT 12/16/32 file for-
mats. This device does not recognize
files in NTFS file format.
(Continued)(Continued)
 Some USB devices may not be sup- ported due to compatibility issues.
 Avoid contact between the USB con- nector with bodily parts or foreign
objects.
 Repeated connecting/disconnecting of USB devices within short periods
of time may result in product mal-
function.
 A strange noise may occur when dis- connecting the USB.
 Make sure to connect/disconnect external USB devices with the audio
power turned off.
 The amount of time required to rec- ognize the USB device may differ
depending on the type, size or file
formats stored in the USB. Such dif-
ferences in time are not indications
of malfunctions.
 The device only supports USB devices used to play music files.
 USB images and videos are not sup- ported.
(Continued)(Continued)
 Do not use the USB I/F to charge batteries or USB accessories that
generate heat. Such acts may lead to
worsened performance or damage
to the device.
 The device may not recognize the USB device if separately purchased
USB hubs and extension cables are
being used. Connect the USB direct-
ly with the multimedia terminal of
the vehicle.
 When using mass storage USB devices with separate logical drives,
only files saved to the root drive can
be played.
 Files may not properly operate if application programs are installed
to the USBs.
 The device may not operate normal- ly if MP3 Players, cellular phones,
digital cameras, or other electronic
devices (USB devices not recognized
as portable disk drives) are connect-
ed with the device.
(Continued)i

4-89
Multimedia System
4
In using usb device
•To use an external USB device,
make sure the device is not
connected when starting up
the vehicle. Connect the device
after starting up.
•If you start the engine when
the USB device is connected, it
may damage the USB device.
(USB flashdrives are very sen-
sitive to electric shock.)
•If the engine is started up or
turned off while the external
USB device is connected, the
external USB device may not
work.
•It may not play inauthentic
MP3 or WMA files.
1) It can only play MP3 files with the compression rate between8Kbps~320Kbps.
2) It can only play WMA music files with the compression ratebetween 8Kbps~320Kbps.
(Continued)
CAUTION(Continued)
•Take precautions for static electricity when connecting or
disconnecting the external
USB device.
•An encrypted MP3 PLAYER is
not recognizable.
•Depending on the condition of
the external USB device, the
connected external USB
device can be unrecognizable.
•When the formatted byte/sec- tor setting of External USB
device is not either 512BYTE
or 2048BYTE, then the device
will not be recognized.
•Use only a USB device format-
ted to FAT 12/16/32.
•USB devices without USB I/F
authentication may not be
recognizable.
•Make sure the USB connec- tion terminal does not come in
contact with the human bodyor other objects.
(Continued)
(Continued)
•If you repeatedly connect or
disconnect the USB device in
a short period of time, it may
break the device.
•You may hear a strange noise when connecting or discon-
necting a USB device.
•If you disconnect the external
USB device during playback in
USB mode, the external USB
device can be damaged or may
malfunction. Therefore, discon-
nect the external USB devicewhen the audio is turned off or
in another mode. (e.g, Radio orCD)
•Depending on the type and
capacity of the external USB
device or the type of the files
stored in the device, there is a
difference in the time taken
for recognition of the device.
•Do not use the USB device for
purposes other than playing
music files.(Continued)

Driving your vehicle
5
Before driving.........................................................5-3Before entering the vehicle ...........................................5-3
Before starting...................................................................5-3
Ignition switch ........................................................5-5 Key ignition switch ............................................................5-5
Engine Start/Stop button ................................................5-9
Manual transaxle .................................................5-19 Manual transaxle operation .........................................5-19
Good driving practices ...................................................5-21
Automatic transaxle ............................................5-23 Automatic transaxle operation ....................................5-24
Parking ...............................................................................5-28
Good driving practices ...................................................5-28
Braking system.....................................................5-30 Power brakes ...................................................................5-30
Disc brakes wear indicator ...........................................5-31
Rear drum brakes ...........................................................5-31
Parking brake ...................................................................5-31
Anti-lock Brake System (ABS) ....................................5-34
Electronic Stability Control (ESC)................................5-36
Vehicle Stability Management......................................5-40
Hill-Start Assist Control (HAC) ....................................5-41
Good braking practices..................................................5-42 Cruise control .......................................................5-43
Cruise control operation................................................5-43
Special driving conditions ...................................5-48 Hazardous driving conditions.......................................5-48
Rocking the vehicle ........................................................5-48
Smooth cornering ...........................................................5-49
Driving at night ................................................................5-49
Driving in the rain ...........................................................5-50
Driving in flooded areas ................................................5-50
Highway driving ...............................................................5-51
Winter driving .......................................................5-52 Snow or icy conditions ..................................................5-52
Winter precautions .........................................................5-54
Vehicle weight ......................................................5-56 Overloading.......................................................................5-56

5-2
Driving your vehicle
Carbon monoxide (CO) gas is toxic. Breathing CO can cause unconsciousness and death.
Engine exhaust contains carbon monoxide which canno t be seen or smelled.
Do not inhale engine exhaust.
If at any time you smell engine exhaust inside the vehicle, open the windows immediately. Exposure to CO can cause
unconsciousness and death by asphyxiation.
Be sure the exhaust system does not leak.
The exhaust system should be checked whenever the v ehicle is raised to change the oil or for any other purpose. If
you hear a change in the sound of the exhaust or if you drive over something that strikes the undernea th side of the
vehicle, we recommend that the exhaust system be ch ecked as soon as possible by an authorized HYUNDAI dealer.
Do not run the engine in an enclosed area.
Letting the engine idle in your garage, even with t he garage door open, is a hazardous practice. Run t he engine only
long enough to start the engine and to move the veh icle out of the garage.
Avoid idling the engine for prolonged periods with people inside the vehicle.
If it is necessary to idle the engine for a prolong ed period with people inside the vehicle , be sure to do so only in an
open area with the air intake set at "Fresh" and fa n control set to high so fresh air is drawn into the interior.
Keep the air intakes clear.
To assure proper operation of the ventilation syste m, keep the ventilation air intakes located in front of the windshield
clear of snow, ice, leaves, or other obstructions.
If you must drive with the tailgate open:
Close all windows.
Open instrument panel air vents.
Set the air intake control at "Fresh", the air flow control at "Floor" or "Face", and the fan control set to high.
WARNING

Key ignition switch
(if equipped)
IGNITION SWITCH
5-5
Driving your vehicle
5OIB054010
To reduce the risk of SERIOUS
INJURY or DEATH, take the fol
lowing precautions:
•NEVER allow children or any
person who is unfamiliar with
the vehicle to touch the ignition
switch or related parts.
Unexpected and sudden vehicle
movement can occur.
•NEVER reach through the steer
ing wheel for the ignition switch,
or any other control, while the
vehicle is in motion. The pres
ence of your hand or arm in this
area may cause a loss of vehicle
control resulting in an accident.
WARNING
•NEVER turn the ignition switch
to the LOCK or ACC position
while the vehicle is in motion
except in an emergency. This
will result in the engine turning
off and loss of power assist for
the steering and brake systems.
(Continued)
(Continued)
This may lead to loss of direc
tional control and braking func
tion, which could cause an acci
dent.
•Before leaving the driver’s seat,
always make sure the shift lever
is in 1st gear (for manual
transaxle vehicle) or P (Park, for
automatic transaxle vehicle)
position, apply the parking
brake, and turn ignition switch to
the LOCK position.
Unexpected vehicle movement
may occur if these precautions
are not followed.WARNING

5-6
Driving your vehicle
Key ignition switch positions
Switch
PositionActionNotice
LOCKThe ignition key can be removed in the LOCK position.The steering wheel locks to protect the vehi
cle from theft. (if equipped)
ACC
Electrical accessories are usable.The steering wheel unlocks.
If difficulty is experienced turning the ignition
switch to the ACC position, turn the key
while turning the steering wheel right and
left to release tension.
ON
This is the normal key position when the engine has started.
All features and accessories are usable.
The warning lights can be checked when you turn the ignition
switch from ACC to ON.Do not leave the ignition switch in the ON
position when the engine is not running to
prevent the battery from discharging.
STARTTo start the engine, turn the ignition switch to the START position.
The switch returns to the ON position when you let go of the key.The engine will crank until you release the
key.

5-7
Driving your vehicle
5
Starting the engine Starting the gasoline engine
Vehicle with manual transaxle:
1. Make sure the parking brake is
applied.
2. Make sure the shift lever is in neu tral.
3. Depress the clutch and brake ped als.
4. Turn the ignition switch to the START position. Hold the key
(maximum of 10 seconds) until the
engine starts and release it. Vehicle with automatic transaxle:
1. Make sure the parking brake is
applied.
2. Make sure the shift lever is in P (Park).
3. Depress the brake pedal.
4. Turn the ignition switch to the START position. Hold the key
(maximum of 10 seconds) until the
engine starts and release it.
•Always wear appropriate shoes
when operating your vehicle.
Unsuitable shoes, such as high
heels, ski boots, sandals, flip
flops, etc., may interfere with
your ability to use the brake,
accelerator and clutch pedals.
•Do not start the vehicle with the
accelerator pedal depressed.The
vehicle can move and lead to an
accident.
•Wait until the engine rpm is nor
mal. The vehicle may suddenly
move if the brake padel is
released when the rpm is high.
WARNING

5-8
Driving your vehicle
Information
• Do not wait for the engine to warm up while the vehicle remains station
ary.
Start driving at moderate engine
speeds. (Steep accelerating and
decelerating should be avoided.)
• Always start the vehicle with your foot on the brake pedal. Do not
depress the accelerator while start
ing the vehicle. Do not race the
engine while warming it up.Starting the diesel engine
To start the diesel engine when the
engine is cold, it has to be preheat
ed before starting the engine and
then have to be warmed up before
starting to drive.
Vehicle with manual transaxle:
1. Make sure the parking brake is applied.
2. Make sure the shift lever is in neu tral.
3. Depress the clutch and brake ped als.
4. Turn the ignition switch to the ON position to preheat the engine.
The glow indicator light ( ) will
illuminate.
5. When the glow indicator light ( ) goes out, turn the key ignition
switch to the START position. Holdthe key (maximum of 10 seconds)
until the engine starts and release it. Information
If the engine does not start within 10
seconds after preheating is completed,
turn the ignition switch once more to
the LOCK position and wait for 10
seconds. Then turn the ignition switch
to the ON position in order to preheat
the engine again.ii

5-9
Driving your vehicle
5
Starting and stopping the engine
for turbocharger intercooler
1. Do not race or accelerate theengine immediately after starting
the engine.
If the engine is cold, idle for sever
al seconds before sufficient lubri
cation is ensured in the turbo
charger unit.
2. After high speed or extended driv ing that requires heavy engine
load, idle the engine about one
minute before turning the engine
off.
This idle time will allow the tur
bocharger to cool prior to shutting
the engine off.
Do not turn off the engine immedi
ately after it has been subjected to a
heavy load. Doing so may cause
severe damage to the engine or
turbo charger unit.
To prevent damage to the vehicle:
•Do not hold the ignition key in the
START position for more than 10
seconds. Wait 5 to 10 seconds
before trying again.
•Do not turn the ignition switch to
the START position with the
engine running. It may damage the
starter.
•If traffic and road conditions per
mit, you may put the shift lever in
the N (Neutral) position while the
vehicle is still moving and turn the
ignition switch to the START posi
tion in an attempt to restart the
engine.
•Do not push or tow your vehicle to
start the engine.
Engine Start/Stop button
(if equipped)
Whenever the front door is opened,
the Engine Start/Stop button will illu
minate and will go off 30 seconds
after the door is closed. (if equipped)
NOTICE
NOTICE
OGC054019