Normal Maintenance Schedule HYUNDAI ELANTRA 2022 User Guide

Maintenance
9-32
Tire Rotation
To equalize tread wear, HYUNDAI
recommends that the tires be rotated
according to the maintenance schedule
or sooner if irregular wear develops.
During rotation, check the tires for
correct balance.
When rotating tires, check for uneven
wear and damage. Abnormal wear is
usually caused by incorrect tire pressure,
improper wheel alignment, out-of-
balance wheels, severe braking or severe
cornering. Look for bumps or bulges in
the tread or side of the tire. Replace the
tire if you find any of these conditions.
Replace the tire if fabric or cord is visible.
After rotation, be sure to bring the front
and rear tire pressures to specification
and check lug nut tightness (proper
torque is 79~94 lbf·ft [11~13 kgf·m]).
„„Without a spare tireWithout a spare tire
OHI078078OHI078078
Disc brake pads should be inspected for
wear whenever tires are rotated.
Information
Tires that are asymmetrical or
directional can only be installed
on the wheel in one direction. The
outside and inside of an asymmetrical
tire is not easily distinguishable. Pay
careful attention to the markings on
the sidewalls of the tires, noting the
“outside” marking and also the rotating
direction before installing them on the
vehicle.
WARNING
• Do not use the compact spare tire for
tire rotation.
• Do not mix bias ply and radial ply
tires under any circumstances.
This may cause unusual handling
characteristics that may cause loss
of vehicle control resulting in an
accident.
CN7 HMA 9.indd 9-322020-12-03 9:42:25

Index
I-10
P
Parking Brake ...................................................................................................... 9-21
Checking the Parking Brake............................................................................. 9-21
R
Rear Cross-Traffic Collision Warning (RCCW) ............................................... 7-117
Function malfunction and limitations ............................................................ 7-121
Function operation.......................................................................................... 7-119
Function settings ............................................................................................ 7-118
Rear Cross-Traffic Collision-Avoidance Assist (RCCA) ................................. 7-125
Function malfunction and limitations ............................................................ 7-131
Function operation.......................................................................................... 7-127
Function settings ............................................................................................ 7-126
Rear View Monitor (RVM) ................................................................................ 7-113
Function malfunction and limitations ............................................................ 7-116
Function operation.......................................................................................... 7-114
Function settings ............................................................................................ 7-114
Recommended Lubricants and Capacities........................................................... 2-13
Recommended SAE Viscosity Number ........................................................... 2-14
Reporting Safety Defects ..................................................................................... 2-18
Reverse Parking Collision-Avoidance Assist (PCA) ........................................ 7-138
Function malfunction and limitations ............................................................ 7-142
Function operation.......................................................................................... 7-141
Function settings ............................................................................................ 7-139
Reverse Parking Distance Warning (PDW) ...................................................... 7-135
Function malfunction and precautions .......................................................... 7-136
Function operation.......................................................................................... 7-136
S
Safe Exit Warning (SEW) ................................................................................... 7-60
Function malfunction and limitations .............................................................. 7-63
Function operation............................................................................................ 7-62
Function settings .............................................................................................. 7-61
Safety Messages..................................................................................................... 1-4
Scheduled Maintenance Services .......................................................................... 9-7
Maintenance Under Severe Usage Conditions ................................................. 9-11
Normal Maintenance Schedule (Smartstream G2.0 Atkinson) .......................... 9-8