light HYUNDAI ELANTRA 2022 Workshop Manual

Page 147 of 584

05
5-11
Remote start (if equipped)
You can start the engine and turn on the
climate system by pressing the remote
start button (5) outside the vehicle.
To start and stop engine remotely :
1. Press the door lock button (1), and
then the hazard warning lights blink
once to alert you.
2. Press the Remote Start button (5)
for more than 2 seconds to start the
engine within 4 seconds after pressing
the door lock button (1).
3. If you want to stop the engine, press
the Remote Start button (5) again.
In case of the manual operation,
the climate control system will be
maintained even when the engine is
turned OFF. However, the automatic
operation is set to 72°F (22°C).
If someone without a designated smart
key attempts to drive your vehicle after
you remotely started it, the engine will
be stopped.
Information
$IWHUUHPRWHO\VWDUWLQJWKHYHKLFOHWKH
HQJLQHZLOOWXUQRIIDIWHUPLQXWHVLIWKH
YHKLFOHLVQRWGULYHQ
CAUTION
• The remote start will not work if you
exceed the operating distance limit
(about 10 m).
• Avoid idling the engine for prolonged
periods to follow the emission
regulations in your locality.
• Laws in your locality may restrict the
use of remote start. You should check
locality regulations before using this
remote starting system.
• It is only possible to start the engine
remotely when shifted to P (Park).
• If the hood or the trunk is opened,
you cannot start the engine
remotely.
CN7 HMA 5.indd 5-112020-12-03 9:20:43

Page 156 of 584

Convenient Features
5-20
5HPRWH&RQWUROZLWK'LJLWDO.H\
To use the remote control function with
your android smartphone, Bluetooth
must be turned on.
Remote Control Connection with Digital
Key
1. Open Hyundai digital key application
on the smartphone. Select the
vehicle to activate the remote control
function as a main vehicle.
2. Approach with the activated
smartphone app to your vehicle
and you can check whether the
connection is available. If it enables
your smartphone to connect, connect
with your vehicle by pressing the
connect button. The remote control
function is activated after completing
the process.
Remote Control Operation with Digital
Key
You can execute the remote control
operation including door lock/unlock,
panic on/off, remote start / remote
stop and trunk opening. The icon for
each function will be highlighted and
alarm/vibration also provided when the
operation is performed.
Note that you cannot lock your vehicle
using the Hyundai digital key app if any
of the following occurs:
• The POWER button is in ACC or ON
position.
• Any doors are open.
When the smartphone and the vehicle
are connected by the Bluetooth function
but the remote control command
cannot be received over 5 minutes, the
remote control connection is cancelled
automatically. CAUTION
• If metallic window tint was applied
to your vehicle, it may cause
bad Bluetooth connection or
performance degradation of the
digital key.
• If multiple users operate the remote
control function simultaneously, the
connection between the digital key
and the vehicle might result in failed
commands. Please connect and
operate the remote control function
only with the necessary user.
• When using the remote control
operation, the driver (the remote
control user) should leave the vehicle
after confirming the door lock (the
chime sounds once and the hazard
warning lights blink).
• The remote functions of the Digital
Key app enables the vehicle to be
controlled from a set distance. If
the digital key or the vehicle goes
beyond the operable distance, the
remote control function might be
disconnected or cancelled.
• If the digital key (smartphone) is
connected with the vehicle for the
remote control, the driver with the
key goes far away from the vehicle,
the function might not work.
• If the remote control operation
is executed where the mobile
connection is weak, Bluetooth
connection is poor due to several
Bluetooth devices or there is an
object such as metal or concrete, it
might be delayed or the operable
distance might decrease. You should
not cover the smartphone with your
hand or place other devices which
can cause frequency interference. It
may result in poor performance.
• If the remote control function is not
available, please use NFC function to
lock or unlock the doors.
CN7 HMA 5.indd 5-202020-12-03 9:20:45

Page 157 of 584

05
5-21
Remote Start with Digital Key
• When the shift lever of your vehicle
is in P (Park) and all of the doors
including trunk and hood is locked
and the vehicle is off, press the Door
Lock button in the Hyundai Digital
Key app then press the Remote Start
button within 4 seconds.
You can confirm the engine is on if the
hazard warning lights blinks two times
and the chime sounds.
• If you want to turn off the engine,
press Remote Engine Stop. Air
Conditioner / Heating system
maintains the same status as when
you last used the vehicle.
• Unless you put the registered digital
key(smartphone) on the interior
authentication pad (wireless charger)
when the remote start function is on,
the engine will turn off.
• If you do not get into the vehicle
within 10 minutes after the engine
turns on, the vehicle will turn off.
For more information, refer to the Engine
Start/Stop button in chapter 6.
Vehicle information Display
The digital key application displays
the vehicle information such as
driving or door conditions through the
communication with the vehicle.
• How to check : Select the vehicle
what you want to check and touch
the vehicle image, then vehicle
information display page will be
shown.
• Contents : accumulated odometer,
latest fuel economy, driving range,
fuel remaining, tire pressure, doors
lock/unlock status and last data
updated time.
ÃDisplayed vehicle data could be
differed from the current vehicle
condition.
ÃFor more information, please refer to
the ‘Tutorial’ on your Digital key app.6PDUWSKRQHFKDQJH$SSGHOHWLRQ
If you change your smartphone or delete
the Hyundai Digital Key App, please refer
to the following to set up your Digital
Key:
Smartphone Change/ Reset
If you change or reset the smartphone,
the registered digital key in your previous
smartphone may not be used. Please
refer to following procedure to use the
digital key.
1. Install the digital key application and
log in.
2. If you are the owner, retry the Digital
key save process.
3. If you are the sharer, need to re-share
the key from owner.
App delete & reinstall/ Delete App data
You can re-download the digital key from
the server and follow these procedures.
1. Reinstall the application and log in.
2. Input the PIN number for user
verification.
3. If PIN is correct, digital key data
will be re-downloaded to your
smartphone and you can use it
without any further registration or
sharing.
Smartphone operability with Digital Key
The digital key application may not be
available to older type smartphones.
Please check the available smartphone
models with your dealer. NFC antenna
position on the smartphone can be
confirmed on each smartphone’s manual
or contact to customer service center of
the smartphone manufacturer.
CN7 HMA 5.indd 5-212020-12-03 9:20:45

Page 162 of 584

Convenient Features
5-26
If the digital key (card key) does not work,
please move the card 4 inches (0.1m)
away from the handle authentication
pad and retry to touch. If the card key is
damaged by impact, it may not operate
properly or at all. You should buy a new
card and register again. Long-time
exposure to high temperature may cause
the card key to malfunction. Please be
careful not to expose the key to direct
sunlight or high temperature.6WDUWXSZLWK&DUGNH\
After placing your registered card key
onto the interior authentication pad
(wireless charger), step on the brake and
press the Engine Start/Stop button.
WARNING
• If you do not place the digital key
(card key) onto the center of the
interior authentication pad (wireless
charger) exactly, the card key may
not be recognized. If the engine is
not turned on, adjust and place the
key again.
• If you overlap and use the key
with NFC-enabled cards such as
transportation card or credit card,
the card key may not be recognized.
• If the digital key (card key) does
not work, please move the card 4
inches (0.1m) away from the handle
authentication pad and retry to
touch.
• If the card key is damaged by impact,
it may not operate properly or at
all. You should buy a new card and
register again.
For more information, refer to the
Engine Start/Stop button in chapter 6.
CN7 HMA 5.indd 5-262020-12-03 9:20:45

Page 169 of 584

05
5-33
Operating Door Locks from
Inside the Vehicle
With the door handle
OCN7050010OCN7050010
)URQWGRRU
If the inner door handle is pulled when
the door is locked, the door will unlock
and open.
5HDUGRRU
If the inner door handle is pulled once
when the door is locked, the door will
unlock. If the inner door handle is pulled
once more, the door will open.
Information
,IDSRZHUGRRUORFNHYHUIDLOVWRIXQFWLRQ
ZKLOH\RXDUHLQWKHYHKLFOHWU\RQHRU
PRUHRIWKHIROORZLQJWHFKQLTXHVWRH[LW
• 2SHUDWHWKHGRRUXQORFNIHDWXUH
UHSHDWHGO\ ERWKHOHFWURQLFDQG
PDQXDO ZKLOHVLPXOWDQHRXVO\SXOOLQJ
RQWKHGRRUKDQGOH
• 2SHUDWHWKHRWKHUGRRUORFNVDQG
KDQGOHVIURQWDQGUHDU
• /RZHUDIURQWZLQGRZDQGXVHWKH
PHFKDQLFDONH\WRXQORFNWKHGRRUIURP
RXWVLGH
With the central door lock switch
„„Driver’s doorDriver’s door
OCN7050011OCN7050011
„„Front passenger’s doorFront passenger’s door
OCN7050083NOCN7050083N
• When pressing the () portion (1) of
the switch, all vehicle doors will lock.
- If the key is in the ignition switch
and any door is opened, the doors
will not lock even though the lock
button (1) of the central door lock
switch is pressed.
- If the smart key is in the vehicle
and any door is opened, the doors
will not lock even though the lock
button (1) of the central door lock
switch is pressed.
• When pressing the (
) portion (2)
of the switch, all vehicle doors will
unlock.
• Doors indicating light (3)
When all vehicle doors are locked, the
indicating lights on the driver’s door
and passenger’s door will turn on. If
any door is unlocked, it would go off.
CN7 HMA 5.indd 5-332020-12-03 9:20:46

Page 173 of 584

05
5-37
THEFT-ALARM SYSTEM
This system helps to protect your vehicle
and valuables. The horn will sound and
the hazard warning lights will blink
continuously if any of the following
occur:
- A door is opened without using the
remote key or smart key.
- The trunk is opened without using the
remote key or smart key.
- The engine hood is opened.
The alarm continues for 30 seconds, then
the system resets. To turn off the alarm,
unlock the doors with the remote key or
smart key.
The Theft Alarm System automatically
sets 30 seconds after you lock the doors
and the trunk. For the system to activate,
you must lock the doors and the trunk
from outside the vehicle with the remote
key or smart key or by pressing the
button on the outside of the door handle
with the smart key in your possession.
The hazard warning lights will blink and
the chime will sound once to indicate the
system is armed.
Once the security system is set, opening
any door, the trunk, or the hood without
using the remote key or smart key will
cause the alarm to activate.
The Theft Alarm System will not set if the
hood, the trunk, or any door is not fully
closed. If the system will not set, check
the hood, the trunk, or the doors are fully
closed.
Do not attempt to alter this system or
add other devices to it. Information
• 'RQRWORFNWKHGRRUVXQWLODOO
SDVVHQJHUVKDYHOHIWWKHYHKLFOH,IWKH
UHPDLQLQJSDVVHQJHUOHDYHVWKHYHKLFOH
ZKHQWKHV\VWHPLVDUPHGWKHDODUP
ZLOOEHDFWLYDWHG
• ,IWKHYHKLFOHLVQRWGLVDUPHGZLWKWKH
UHPRWHNH\RUVPDUWNH\RSHQWKH
GRRUVE\XVLQJWKHPHFKDQLFDONH\DQG
SODFHWKHLJQLWLRQVZLWFKLQWKH21
SRVLWLRQ IRUUHPRWHNH\ RUVWDUWWKH
HQJLQH IRUVPDUWNH\ DQGZDLWIRU
VHFRQGV
• :KHQWKHV\VWHPLVGLVDUPHGEXWD
GRRURUWUXQNLVQRWRSHQHGZLWKLQ
VHFRQGVWKHV\VWHPZLOOEHUHDUPHG
CN7 HMA 5.indd 5-372020-12-03 9:20:47

Page 174 of 584

Convenient Features
5-38
STEERING WHEEL
Electric Power Steering (EPS)
The system assists you with steering the
vehicle. If the vehicle is turned off or
if the power steering system becomes
inoperative, you may still steer the
vehicle, but it will require increased
steering effort.
Also, the steering effort becomes heavier
as the vehicle’s speed increases and
becomes lighter as the vehicle’s speed
decreases for better control of the
steering wheel.
Should you notice any change in the
effort required to steer during normal
vehicle operation, have the system
checked by an authorized HYUNDAI
dealer.
CAUTION
• If the Electric Power Steering System
does not operate normally, the
warning light (
) will illuminate
on the instrument cluster. You may
steer the vehicle, but it will require
increased steering efforts. Take your
vehicle to an authorized HYUNDAI
dealer and have the system checked
as soon as possible.
• When an abnormality is detected
in the electric power steering
system, to prevent an accident, the
steering assist function may become
inoperative. At this time, the warning
light turns on or blinks on the cluster.
The steering wheel may become
difficult to control or operate. Have
your vehicle checked immediately,
after moving the vehicle to a safe
area.
Information
7KHIROORZLQJV\PSWRPVPD\RFFXUGXULQJ
QRUPDOYHKLFOHRSHUDWLRQ
• 7KHVWHHULQJHIIRUWPD\EHKLJK
LPPHGLDWHO\DIWHUSODFLQJWKHLJQLWLRQ
VZLWFKLQWKH21SRVLWLRQ
7KLVKDSSHQVDVWKHV\VWHPSHUIRUPV
WKH(36V\VWHPGLDJQRVWLFV:KHQWKH
GLDJQRVWLFVDUHFRPSOHWHGWKHVWHHULQJ
ZKHHOHIIRUWZLOOUHWXUQWRLWVQRUPDO
FRQGLWLRQ
• :KHQWKHEDWWHU\YROWDJHLVORZ\RX
PD\KDYHWRSXWPRUHVWHHULQJHIIRUW
+RZHYHULWLVDWHPSRUDU\FRQGLWLRQVR
WKDWLWZLOOUHWXUQWRQRUPDOFRQGLWLRQ
DIWHUFKDUJLQJWKHEDWWHU\
• $FOLFNQRLVHPD\EHKHDUGIURPWKH
(36UHOD\DIWHUWKHLJQLWLRQVZLWFKLVLQ
WKH21RU/2&.2))SRVLWLRQ
• 0RWRUQRLVHPD\EHKHDUGZKHQWKH
YHKLFOHLVDWDVWRSRUDWDORZGULYLQJ
VSHHG
• :KHQ\RXRSHUDWHWKHVWHHULQJZKHHO
LQORZWHPSHUDWXUHVDEQRUPDOQRLVH
PD\RFFXU,IWKHWHPSHUDWXUHULVHVWKH
QRLVHZLOOGLVDSSHDU7KLVLVDQRUPDO
FRQGLWLRQ
• :KHQDQHUURULVGHWHFWHGIURPWKH
(36WKHVWHHULQJHIIRUWDVVLVWIXQFWLRQ
PD\EHFRPHLQRSHUDWLYHLQRUGHUWR
SUHYHQWIDWDODFFLGHQWV,QVWUXPHQW
FOXVWHUZDUQLQJOLJKWVPD\EHRQRUWKH
VWHHULQJHIIRUWPD\EHKLJK,IWKHVH
V\PSWRPVRFFXUGULYHWKHYHKLFOHWR
DVDIHDUHDDVVRRQDVLWLVVDIHWRGR
VR+DYHWKHV\VWHPFKHFNHGE\DQ
DXWKRUL]HG+<81'$,GHDOHUDVVRRQ
DVSRVVLEOH
CN7 HMA 5.indd 5-382020-12-03 9:20:48

Page 175 of 584

05
5-39
Tilt Steering / Telescope Steering
When adjusting the steering wheel to a
comfortable position, adjust the steering
wheel so that it points toward your chest,
not toward your face. Make sure you can
see the instrument cluster warning lights
and gauges. After locking the lever, push
the steering wheel both up and down to
be certain it is locked in position. Always
adjust the position of the steering wheel
before driving.
WARNING
NEVER adjust the steering wheel while
driving. This may cause loss of vehicle
control resulting in an accident.
OCN7050013OCN7050013
To adjust the steering wheel angle and
height:
1. Pull down the lock-release lever (1).
2. Adjust the steering wheel to the
desired angle (2) and distance
forward/back (3).
3. Pull up the lock-release lever to lock
the steering wheel in place.
Information
6RPHWLPHVWKHORFNUHOHDVHOHYHUPD\QRW
HQJDJHFRPSOHWHO\7KLVPD\RFFXUZKHQ
WKHJHDUVRIWKHORFNLQJPHFKDQLVPGRQRW
FRPSOHWHO\PHVK,IWKLVRFFXUVSXOOGRZQ
RQWKHORFNUHOHDVHOHYHUUHDGMXVWWKH
VWHHULQJZKHHODJDLQDQGWKHQSXOOEDFN
XSRQWKHUHOHDVHOHYHUWRORFNWKHVWHHULQJ
ZKHHOLQSODFH
CAUTION
While adjusting the steering wheel
height, please do not push or pull it
hard since the fixture can be damaged.
CN7 HMA 5.indd 5-392020-12-03 9:20:48

Page 178 of 584

Convenient Features
5-42
Electrochromic mirror (ECM) with
HomeLink® system (if equipped)
OCN7050084NOCN7050084N
Your vehicle may be equipped with
a Gentex Automatic-Dimming Mirror
with an Integrated HomeLink® Wireless
Control System.
During nighttime driving, this feature will
automatically detect and help reduce
rearview mirror glare. The HomeLink®
Universal Transceiver allows you to
activate your garage door(s), electric
gate, home lighting, etc.
(1) HomeLink Channel 1
(2) HomeLink Channel 2
(3) HomeLink Channel 3
(4) Garage Door Opener Status Indicator :
Closing or Closed
(5) HomeLink Operation Indicator
(6) Garage Door Opener Status Indicator :
Opening or Opened
(7) HomeLink User Interface Indicator
$XWRPDWLF'LPPLQJ1LJKW9LVLRQ6DIHW\

Page 181 of 584

05
5-45
Gate operator & Canadian programing
During programing, your handheld
transmitter may automatically stop
transmitting. Continue to press the
Integrated HomeLink® Wireless Control
System button while you press and re-
press (“cycle”) your handheld transmitter
every two seconds until the frequency
signal has been learned. The indicator
light will flash slowly and then rapidly
after several seconds upon successful
training.
OCN7050085NOCN7050085N
Operating HomeLink®
1. Press and release one of the
HomeLink buttons (1, 2 or 3) that
programed.
2. The HomeLink indicator (4) will
operate as below:
- Indicates Green and is continuously
ON (Fixed Code Garage Door
Opener)
- Flashes in Green rapidly (Rolling
Code Garage Door Opener)
OCN7050087NOCN7050087N
Erasing HomeLink® buttons
1. Press and hold the button (1) and (3)
simultaneously.
2. The indicator (4) is turned
continuously ON in orange for about
10 seconds.
3. Then the indicator (4) color changes
to Green and flashes rapidly.
Release the buttons once the green
indicator flashes.
4. Now HomeLink button (1), (2) and (4)
memories are all cleared.
NVS® is a registered trademark and
Z-Nav™ is a trademark of the Gentex
Corporation, Zeeland, Michigan.
HomeLink® is a registered trademark
owned by Johnson Controls,
Incorporated, Milwaukee, Wisconsin.
FCC ID: NZLUAHL5A
IC: 4112A-UAHL5A
CN7 HMA 5.indd 5-452020-12-03 9:20:49

Page:   < prev 1-10 ... 11-20 21-30 31-40 41-50 51-60 61-70 71-80 81-90 91-100 ... 180 next >