engine HYUNDAI GENESIS GV70 2021 Owners Manual

07
7-67
%DVLFIXQFWLRQ
Driver Attention Warning can help
determine the driver's attention level
by analyzing driving pattern and driving
time while vehicle is being driven. Driver
Attention Warning will recommend a
break when the driver’s attention level
falls below a certain level.
/HDGLQJYHKLFOHGHSDUWXUHDOHUW
function
Leading Vehicle Departure Alert function
will inform the driver when a detected
vehicle in front departs from a stop.
Detecting sensor
OJK071223NOJK071223N[1]: Front view camera
The front view camera is used as a
detecting sensor to detect driving
patterns and front vehicle departure
while vehicle is being driven.
Refer to the picture above for the
detailed location of the detecting sensor.
&$87,21
• $OZD\VNHHSWKHIURQWYLHZFDPHUDLQ
good condition to maintain optimal
SHUIRUPDQFHRI'ULYHU$WWHQWLRQ
:DUQLQJ
• For more details on the precautions
RIWKHIURQWYLHZFDPHUDUHIHUWR

U)RUZDUG&ROOLVLRQ$YRLGDQFH$VVLVW
)&$
VVHFWLRQLQWKLVFKDSWHU
'ULYHU$WWHQWLRQ:DUQLQJ6HWWLQJV
Setting features
OJK070014LOJK070014L
Driver Attention Warning
With the engine on, select or deselect

S'ULYHU$VVLVWDQFH

Driver Assistance System
7-68
OJK070002LOJK070002L
Warning Timing
With the engine on, select ‘Driver
$VVLVWDQFH

07
7-69
• The driver’s attention level is displayed
on the scale of 1 to 5. The lower the
level is, the more inattentive the driver
is.
• The level decreases when the driver
does not take a break for a certain
period of time.
7DNLQJDEUHDN
OTM070105LOTM070105L
• The ‘Consider taking a break’ message
will appear on the cluster and an
audible warning will sound to suggest
that the driver take a break, when the
driver’s attention level is below 1.
• Driver Attention Warning will not
suggest a break when the total driving
time is shorter than 10 minutes or 10
minutes has not passed after the last
break was suggested.
:$51,1*
)RU\RXUVDIHW\FKDQJHWKH6HWWLQJV
DIWHUSDUNLQJWKHYHKLFOHDWDVDIH
ORFDWLRQ
&$87,21
• 'ULYHU$WWHQWLRQ:DUQLQJPD\
VXJJHVWDEUHDNGHSHQGLQJRQWKH
GULYHU
TVGULYLQJSDWWHUQRUKDELWV
HYHQLIWKHGULYHUGRHVQ
TWIHHOIDWLJXH
• 'ULYHU$WWHQWLRQ:DUQLQJLVD
VXSSOHPHQWDOIXQFWLRQDQGPD\QRW
EHDEOHWRGHWHUPLQHZKHWKHUWKH
GULYHULVLQDWWHQWLYH
• 7KHGULYHUZKRIHHOVIDWLJXHGVKRXOG
WDNHDEUHDNDWDVDIHORFDWLRQHYHQ
WKRXJKWKHUHLVQREUHDNVXJJHVWLRQ
E\'ULYHU$WWHQWLRQ:DUQLQJ
Information
• For more details on setting the
functions in the infotainment system,
refer to “Vehicle Settings” section in
chapter 4.
• Driver Attention Warning will reset the
last break time to 00:00 in the following
situations:
-The engine is turned off
-The driver unfastens the seat belt
and opens the driver’s door
-The vehicle is stopped for more than
10 minutes
• When the driver resets Driver Attention
Warning, the last break time is set to
00:00 and the driver’s attention level is
set to High.

07
7-77
„„Left sideLeft side„„Right sideRight side
OJK071201NOJK071201NOJK071202NOJK071202N
Blind-Spot View Monitor displays the
rear blind spot area of the vehicle in the
cluster when the turn signal is turned on
to help safely change lanes.
Detecting sensor
OJK071049NOJK071049N[1], [2]: Surround-side view camera
(camera located at bottom of the mirror)
Refer to the picture above for the
detailed location of the detecting
sensors.
%OLQG6SRW9LHZ0RQLWRU
Settings
Setting features
Blind-Spot View
With the engine on, select ‘Driver
$VVLVWDQFH

Driver Assistance System
7-80
Smart Cruise Control Settings
Setting features
OJK070082OJK070082
To turn on Smart Cruise Control
• Press the Driving Assist () button
to turn on Smart Cruise Control. The
speed will be set to the current speed
on the cluster.
• If there is no vehicle in front of you,
the set speed will be maintained, but
if there is a vehicle in front of you,
the speed may decrease to maintain
the distance to the vehicle ahead. If
the vehicle ahead accelerates, your
vehicle will travel at a steady cruising
speed after accelerating to the set
speed.
Information
If your vehicle speed is between 0~ 20 mph
(0~ 30 km/h) when you press the Driving
Assist (
) button, the Smart Cruise
Control speed will be set to 20 mph (30
km/h).
OJK070088OJK070088
To set vehicle distance
Each time the button is pressed, the
headway changes as follows:
Distance 4 Distance 3
Distance 1Distance 2
Information
• If you drive at 56 mph (90 km/h), the
distance is maintained as follows:
Distance 4 -
approximately 172 ft. (53 m)
Distance 3 -
approximately 130 ft. (40 m)
Distance 2 -
approximately 106 ft. (30 m)
Distance 1 -
approximately 82 ft. (25 m)
• The distance is set to the last set
distance when the engine is restarted,
or when Smart Cruise Control was
temporarily canceled.

07
7-83
OJK070016LOJK070016L
Based on Driving Style
• With the engine on, if ‘Driver
$VVLVWDQFH

Driver Assistance System
7-84
OJK071003NOJK071003N
Warning Volume
With the engine on, select ‘Driver
$VVLVWDQFH

Driver Assistance System
7-98
Navigation-based Smart Cruise Control
will help drive at a certain speed
according to the road conditions when
driving on highways (or motorways)
by using road information from the
navigation system while Smart Cruise
Control is operating.
Information
• The Navigation-based Smart Cruise
Control is available only on controlled
access road of certain highways.
ÃControlled access road indicates
roads with limited entrances and
exits that allow uninterrupted high
speed traffic flow. Only passenger
cars and motorcycles are allowed on
controlled access roads.
Available highway (Controlled access road)
USASelect Interstate Highway
and U.S. (Federal) and State
Highways
CanadaSelect Provincial and Territorial
Highways
• Additional highways may be expanded
by future navigation updates.
Information
Navigation-based Smart Cruise Control
operates on main roads of highways (or
motorways), and does not operate on
interchanges or junctions.
+LJKZD\&XUYH=RQH$XWR6ORZGRZQ
If vehicle speed is high, Highway Curve
Zone Auto Slowdown function will
temporarily decelerate your vehicle
or limit acceleration to help you drive
safely on a curve based on the curve
information from the navigation.
+LJKZD\6HW6SHHG$XWR&KDQJH
Highway Set Speed Auto Change
function automatically changes Smart
Cruise Control set speed based on
the speed limit information from the
navigation.
1DYLJDWLRQ%DVHG6PDUW&UXLVH
Control Settings
Setting features
OJK070161LOJK070161L
With the engine on, select ‘Driver
$VVLVWDQFH

07
7-105
Lane Following Assist is designed to help
detect lane markings and/or vehicles on
the road, and assists the driver’s steering
to help keep the vehicle between lanes.
Detecting sensor
OJK071223NOJK071223N[1]: Front view camera
The front view camera is used as a
detecting sensor to detect lane markings
and front vehicles.
Refer to the picture above for the
detailed location of the detecting sensor.
&$87,21
For more details on the precautions
RIWKHIURQWYLHZFDPHUDUHIHUWR

U)RUZDUG&ROOLVLRQ$YRLGDQFH$VVLVW
)&$
VVHFWLRQLQWKLVFKDSWHU
Lane Following Assist Settings
Setting features
OJK070097OJK070097Turning Lane Following Assist On/Off
With the engine on, shortly press the
Lane Driving Assist button located on the
steering wheel to turn on Lane Following
Assist. The grey or green
indicator
light will illuminate on the cluster.
Press the button again to turn off the
function.
/$1()2//2:,1*$66,67

Driver Assistance System
7-106
OJK071003NOJK071003N
Warning Volume
With the engine on, select ‘Driver
$VVLVWDQFH