light HYUNDAI I10 2019 Manual PDF

6-38
Whilst driving
ESC operation
ESC 21 condition
When the ignition switch is in the ON
position, the ESC and the ESC OFF
indicator lights illuminate for approxi-
mately three seconds. After both
lights go off, the ESC is enabled.
When operating
When the ESC is in opera-
tion, the ESC indicator
OLJKWEOLQNV

6-39
06
‡6WDWH
2$&78
3UHVV DQG KROG WKH (6& 2)) EXWWRQ
continuously for more than 3 sec-
onds. The ESC OFF indicator light
and/or message “Traction control and
ESC disabled” illuminates and a
warning chime sounds. In this state,
both the traction control function of
ESC (engine management) and the
brake control function of ESC (brak-
ing management) are disabled.
If the ignition switch is placed in the
LOCK/OFF position when ESC is off,
ESC remains off. Upon restarting the
vehicle, the ESC will automatically
turn on again.
Indicator lights
„ ESC indicator light (blinks)
„ ESC OFF indicator light (comes on)
27'
27'
When the ignition switch is in the ON
position, the ESC indicator light illu-
minates, then goes off if the ESC sys-
tem is operating normally.
The ESC indicator light blinks when-
ever the ESC is operating.
If the ESC indicator light stays on,
your vehicle may have a malfunction
with the ESC system. When this
warning light illuminates we recom-
mend that the vehicle be checked by
a HYUNDAI authorised repairer as
soon as possible.
The ESC OFF indicator light comes
on when the ESC is turned off with
the button.
WARNING
When the ESC is blinking, this
indicates the ESC is active:
Drive slowly and NEVER attempt
to accelerate. NEVER turn the ESC
off whilst the ESC indicator light is
blinking or you may lose control of
the vehicle resulting in an acci-
dent.

6-42
Whilst driving
Emergency Stop Signal (ESS)
The Emergency Stop Signal system
alerts the driver behind by blinking
the stop light when the vehicle is
braked rapidly and severely.
7KHV\VWHPLVDFWLYDWHGZKHQ

6-43
06
Wet brakes can be dangerous! The
brakes may get wet if the vehicle is
driven through standing water or if it
is washed.
Your vehicle will not stop as quickly if
the brakes are wet. Wet brakes may
cause the vehicle to pull to one side.
To dry the brakes, apply the brakes
lightly until the braking action returns
to normal. If the braking action does
not return to normal, stop as soon as
it is safe to do so and we recommend
that you call a HYUNDAI authorised
repairer for assistance.
DO NOT drive with your foot resting
on the brake pedal. Even light, but
constant pedal pressure can result in
the brakes overheating, brake wear,
and possibly even brake failure.
If a tyre goes flat whilst you are driv-
ing, apply the brakes gently and keep
the vehicle pointed straight ahead
whilst you slow down. When you are
moving slowly enough for it to be safe
to do so, pull off the road and stop in
a safe location.
Keep your foot firmly on the brake
pedal when the vehicle is stopped to
prevent the vehicle from rolling for-
ward.

6-44
Whilst driving
The ISG system is to reduce the fuel
consumption by automatically shut-
ting down the engine, when the vehi-
cle is at a standstill (i.e. red stop light,
VWRSVLJQDQGWUDIILFMDP
The engine is automatically started
upon satisfying the starting condi-
tions.
The ISG system is always active,
when the engine is running.
i Information
When the engine is automatically
started by the IS* system, some warn-
ing lights (i.e. ABS, ESC, ESC 2FF,
EPS, and parking brake warning light)
may illuminate for a few seconds due
to the low battery voltage. +owever, it
does not indicate a malfunction with
the IS* system.
To activate the ISG system
Prerequisite for activation
The ISG system operates in the fol-
lowing situations.
‡ 7KHGULYHU‹VVHDWEHOWLVIDVWHQHG

6-50
Whilst driving
The warning light illumi-
nates on the LCD display,
when you cancel FCA sys-
tem. The driver can moni-
tor FCA ON/OFF status on
the LCD display. Also, the warning
light illuminates when the ESC
(Electronic Stability Control) is turned
off. If the warning light remains ON
when FCA is activated, we recom-
mend that you have the system
checked by a HYUNDAI authorised
repairer.

6-54
Whilst driving
Warning message and warning
light
2$&78
Critical forward safety functions are
limited. Camera obscured
When the camera is blocked with dirt,
snow, or debris, FCA system may not
detect other vehicles.
If this occurs, a warning message will
appear on the LCD display.
The system will operate normally
when such dirt, snow or debris is
removed.
FCA may not properly operate in an
area (e.g. open terrain) where any
REMHFWV RU YHKLFOHV DUH QRW GHWHFWHG
after turning on the engine.
Also, even though a warning mes-
sage does not appear on the LCD
display, FCA may not properly oper-
ate.
WARNING
FCA system may not activate
according to road conditions,
inclement weather, driving condi-
tions or traffic conditions.
System malfunction
2$&78
Check forward safety systems

6-65
06
Warning light and message
Keep hands on steering wheel
2$&78
If the driver takes their hands off the
steering wheel for several seconds
whilst LKA system is activated, the
system will warn the driver.
i Information
If the steering wheel is held very lightly
the message may still appear because
L.A system may not recognise that
the driver has their hands on the wheel.
WARNING
The warning message may appear
late according to road conditions.
Therefore, always have your hands
on the steering wheel whilst driv-
ing.
- If you hold the steering wheel
lightly, the system would gener-
ate hands off warning because
/.$ FDQ WUHDW WKH VLWXDWLRQ DV
you do not grab the wheel.
- If continuous hands-off occurs
continuously, the beeping can be
lengthened and continued even
LI/.$VWHHUFRQWUROLVUHOHDVHG
WARNING

6-76
Whilst driving
2$&78
Check SLW (Speed Limit Warning)
system
The warning message appears for a
few seconds, when ISLW does not
properly operate. Then, the master
warning light (
) will illuminate.
We recommend that you have the
system checked by a HYUNDAI
authorised repairer.
/LPLWDWLRQVRIWKHV\VWHP
ISLW may not operate properly or
may not provide correct information
in the following situations.
When the traffic sign condition is
poor

6-85
06
i Information
2$,
First, switch the mode to Cruise
Control by pressing the
button
if equipped with the Speed Limit
Control System.
7he mode changes, as below, whenever
the
button is pressed.
System off
Speed Limit ControlCruise Control
2$,
3. 3XVKWKHWRJJOHVZLWFKGRZQ6(7
and release it. The Set speed on the
LCD display will illuminate.
5HOHDVHWKHDFFHOHUDWRUSHGDO
i Information
7he vehicle may slow down or speed
up slightly whilst going uphill or down-
hill.
To increase Cruise Control
speed
2$,