height HYUNDAI I10 2020 User Guide

3-30
Safety system
Selecting a Child Restraint
System (CRS)
When selecting a CRS for your child,
always:
‡Make sure the CRS has a label cer-
tifying that it meets applicable
Safety Standards of your country.
‡Select a Child Restraint System
based on your child’s height and
weight. The required label or the
instructions for use typically provide
this information.
‡Select a Child Restraint System
that fits the vehicle seating position
where it will be used.
‡Read and comply with the warnings
and instructions for installation and
use provided with the Child
Restraint System.
Child Restraint System types
There are three main types of Child
Restraint Systems: rearward-facing
seats, forward-facing seats, and
booster seats. They are classified
according to the child’s age, height
and weight.
CRS09
Rearward-facing Child Restraint
System
A rearward-facing Child Restraint
System provides restraint with the
seating surface against the back of
the child. The harness system holds
the child in place, and in an accident,
acts to keep the child positioned in
the Child Restraint Systems and
reduce the stress to the fragile neck
and spinal cord.
All children under the age of one year
must always ride in a rearward-facing
Child Restraint System. There are
different types of rearward-facing
Child Restraint Systems: infant-only
Child Restraint Systems can only be
used rearward-facing. Convertible
and 3-in-1 Child Restraint Systems
typically have higher height and
weight limits for the rearward-facing
position, allowing you to keep your
child rearward-facing for a longer
period of time.
Keep using Child Restraint Systems
in the rearward-facing position as
long as children fit within the height
and weight limits allowed by the Child
Restraint System’s manufacturer.

3-31
03
OIB034017
Forward-facing Child Restraint
System
A forward-facing Child Restraint
System provides restraint for the
child’s body with a harness. Keep
children in a forward-facing Child
Restraint System with a harness until
they reach the top height or weight
limit allowed by your Child Restraint
System’s manufacturer.
Once your child outgrows the for-
ward-facing Child Restraint System,
your child is ready for a booster seat.
Booster seats
A booster seat is Child Restraint
System designed to improve the fit of
the vehicle’s seat belt system. A
booster seat positions the seat belt
so that it fits properly over the stron-
ger parts of your child’s body. Keep
your children in booster seats until
they are big enough to fit in a seat
belt properly.
For a seat belt to fit properly, the lap
belt must lie comfortable across the
upper thighs, not the stomach. The
shoulder belt should lie comfortable
across the shoulder and chest and
not across the neck or face. Children
under age 13 must always be prop-
erly restrained to minimise the risk of
injury in an accident, sudden stop or
sudden manoeuvre.
Installing a Child Restraint
System (CRS)
WARNING
Before installing your Child
Restraint System always:
Read and follow the instructions
provided by the manufacturer of
the Child Restraint System.
Failure to follow all warnings and
instructions could increase the
risk of the SERIOUS INJURY or
DEATH if an accident occurs.
WARNING
If the vehicle head restraint pre-
vents proper installation of a Child
Restraint System, the head
restraint of the respective seating
position shall be readjusted or
entirely removed.
After selecting a proper Child
Restraint System and checking that
the Child Restraint System fits prop-
erly in the rear of this vehicle, you are
ready to install the Child Restraint
System according to the manufactur-
er’s instruction. There are three gen-
eral steps in installing the Child
Restraint Systems properly:
‡Properly secure the Child
Restraint System to the vehicle.
All Child Restraint System must be
secured to the vehicle with the lap
belt or lap part of a lap/shoulder belt
or with the ISOFIX top-tether and/or
ISOFIX anchorage.

3-37
03
Note 1) : The universal belted CRS applies to all mass groups.
Note 2) : Seating position not suitable for child restraint system if the passenger’s front
air bag is activate.
Note
3) : To install a ISOFIX Child Restraint Systems :
- Driver Seat : You should move the seat at mid position and adjust the height
of seat to highest and head restraint stay angle to 9° position.
- Front Passenger Seat : You should move the seat at foremost and head
restraint stay angle to 9° position.
Note
4) : To install a ISOFIX Child Restraint Systems:
You should remove the head restraint of the seat.
Note
5) : The seating position (number 5) is not suitable for fitment of child restraint sys-
tem with support leg.
K Do not use forward facing child restraint system when child’s weight is below 13 kg at
all seat.
K For semi-universal or vehicle specific CRS(ISOFIX or belted CRS), please see the
vehicle list provided in the manual of CRS.
Seat
NumberPosition
in the vehicle
1 Front right
2 Front centre
3 Front left
42
nd row right
5* 2
nd row centre
62
nd row left
* : 5 Seater, if equippedOOSEV038035R
Recommended Child Restraint Systems (for Europe)
Mass
groupName Manufacturer Type of FixationECE-R44/R129
Approval No.
Group 0+Cabriofix &
FamilyfixMaxi Cosi ISOFIX E4 04443907
Group I Duo Plus Britax Römer ISOFIX and top-tether E1 04301133
Group II KidFix II XP Britax RömerForward-facing with ISOFIX
and vehicle beltE1 04301323
Group III Junior III GracoForward-facing with vehicle
beltE11 03.44.164
E11 03.44.165
CRS Manufacturer information
Maxi Cosi Cabriofix & Familyfix http://www.maxi-cosi.com
Britax Römmer http://www.britax.com
Graco http//www.gracobaby.com

3-58
Safety system
Additional safety precautions
Passengers should not move out
of or change seats whilst the vehi-
cle is moving. A passenger who is
not wearing a seat belt during a crash
or emergency stop can be thrown
against the inside of the vehicle,
against other occupants, or be eject-
ed from the vehicle.
Do not use any accessories on
seat belts. Devices claiming to
improve occupant comfort or reposi-
tion the seat belt can reduce the pro-
tection provided by the seat belt and
increase the chance of serious injury
in a crash
Do not modify the front seats.
Modification of the front seats could
interfere with the operation of the
supplemental restraint system sens-
ing components or side air bags.
Do not place items under the front
seats. Placing items under the front
seats could interfere with the opera-
tion of the supplemental restraint sys-
tem sensing components and wiring
harnesses.
Do not cause impact to the doors.
Impact to the doors when the ignition
switch is in the ON position may
cause the air bags to inflate.
Adding equipment to or modify-
ing your air bag equipped vehi-
cle
If you modify your vehicle by chang-
ing your vehicle’s frame, bumper sys-
tem, front end or side sheet metal or
ride height, this may affect the opera-
tion of your vehicle’s air bag system.
Air bag warning labels
(if equipped)
OAC3039035R
Air bag warning labels are attached
to alert the driver and passengers of
potential risks of the air bag system.
Be sure to read all of the information
about the air bags that are installed
on your vehicle in this Owner’s
Manual.

5-21
05
Tilt steering / Telescope
steering
WARNING
Never adjust the steering wheel
whilst driving. You may lose steer-
ing control and cause severe per-
sonal injury, death or accidents.
i Information
After adjustment, sometimes the lock-
release lever may not lock the steering
wheel.
It is not a malfunction. 7his occurs
when two gears are not engaged cor-
rectly. In this case, adjust the steering
wheel again and then lock the steering
wheel.
OAC3059009R
To change the steering wheel angle
and height:
1. Pull down the lock-release lever
(1).
$GMXVW WKH VWHHULQJ ZKHHO WR WKH
desired angle (2) and height (3, if
equipped). Move the steering
wheel, so it points toward your
chest, not toward your face. Make
sure you can see the instrument
panel warning lights and gauges.
3. Pull up the lock-release lever to
lock the steering wheel in place.
Push the steering wheel both up and
down to be certain it is locked in posi-
tion.
CAUTION
Whilst adjusting the steering wheel
height, please do not push or pull
it hard since the fixture can be
damaged.