HYUNDAI I10 2020 Owner's Manual

2-7
02
1. Engine coolant reservoir ...................................................................................... 8-13
(QJLQHRLO

2-8
Vehicle information
DIMENSIONS
ItemPetrol Engine
1.0 MPI 1.2 MPI
Displacement
cc (cu. in) 998 (60.90) 1,197 (73.05)
Bore x Stroke
in. (mm)2.80x3.31
(71.0x84.0)2.80x2.98
(71.0x75.6)
Firing order In-line In-line
No. of cylinders 3 4
ENGINE SPECIFICATION
Itemsmm (in)
Overall length144.49 (3,670)
Overall width66.14 (1,680)
Overall height 58.27 (1,480)
Front tread175/65R14 58.23 (1,479)
185/55R15 57.76 (1,467)
195/45R16 57.76 (1,467)
Rear tread 175/65R14 58.66 (1,490)
185/55R15 58.19 (1,478)
195/45R16 58.19 (1,478)
Wheelbase 95.47 (2,425)

2-9
02
BULB WATTAGE
* : If equipped
Type A : MFR (Multi Focus Reflector) Headlight
Type B : Bi-Function Projection Headlight
Light Bulb Bulb type Wattage
FrontType AHeadlight
(High/Low)H19 60/55
Turn signal Light PY21W 21
Type BHeadlight
(High/Low)HB3 60
Low Beam Assist-
Static light H7LL 55
Turn signal Light PY21W 21
Fog Light * 51W 51
Position Light &
Daytime Running Light (DRL) Type A P21/5WLL 21/5
Type B LED LED
Side Repeater Light (Outside Mirror) * LED LED
Side Repeater Light * WY5W 5
RearTail and Stop
LightP21/5WLL 21/5
Turn Signal Light PY21W 21
Reflex Reflector - -
Back Up Light W16WLL 16
Fog Light P21WLL 21
High Mounted
Stop LightLED LED
License Plate
LightsW5WLL 10
InteriorMap Light FESTOON 8
Luggage Room
LightFESTOON 10

2-10
Vehicle information
TYRES AND WHEELS
itemTyre sizeWheel
sizeInflation pressure, bar (psi, kPa)
Wheel lug nut
torque lbf·ft
NJIÃP1‡P Normal load *
1
Maximum load
Front Rear Front Rear
Full size tyre175/65R14 5.5JX14 230,33 (2.3) 210,30 (2.1) 230,33 (2.3) 250,36 (2.5)
79~94
(11~13,
107~127) 185/55R15 6.0JX15 230,33 (2.3) 210,30 (2.1) 230,33 (2.3) 250,36 (2.5)
195/45R16 6.5JX16 230,33 (2.3) 210,30 (2.1) 230,33 (2.3) 250,36 (2.5)
Temporary tyre T115/70D15 3.5JX15 420,60 (4.2)*1 : Normal load : Up to 3 personsNOTICE

2-11
02
AIR CONDITIONING SYSTEM
ItemWeight of Volume Classification
Refrigerant oz. (g)15.17±0.88 (430±25)R-134a
R-1234yf
Compressor lubricant oz. (g)3.53 (100) PAG
Contact a HYUNDAI authorised repairer for more details.
lbs. (kg)
TYRE LOAD AND SPEED CAPACITY
ItemTyre sizeWheel
sizeLoad Capacity Speed Capacity
LI *1kg SS *2PSKNPK
Full size tyre175/65R14 5.5JX14 86 530 T 118 (190)
185/55R15 6.0JX15 86 530 H 130 (210)
195/45R16 6.5JX16 84 500 H 130 (210)
Temporary
tyreT115/70D15 3.5JX15 90 600 M 81 (130)
LUGGAGE VOLUMEGROSS VEHICLE WEIGHT
*1 LI : LOAD INDEX *2 SS : SPEED SYMBOL
ItemsPetrol Engine
1.0 MPI 1.2 MPI
VDA
l (cu ft)MIN. 252 (8.90)
MAX. 1,050 (37.08)
Min : Behind rear seat to upper edge of the seat back.
Max : Behind front seat to roof.
6HDWHU5 Seater
1.0 MPI 1.2 MPI 1.0 MPI 1.2 MPI
AMT MTMT
(ECO)AMT MT AMT MT AMT MT
2,954
(1,340)2,954
(1,340)2,888
(1,310)2,976
(1,350)2,976
(1,350)3,108
(1,410)3,108
(1,410)3,152
(1,430)3,152
(1,430)

2-12
Vehicle information
RECOMMENDED LUBRICANTS AND CAPACITIES
To help achieve proper engine and powertrain performance and durability, use
only lubricants of the proper quality. The correct lubricants also help promote
engine efficiency that results in improved fuel economy.
These lubricants and fluids are recommended for use in your vehicle.
Lubricant Volume Classification
Engine oil *1 *2
(drain and refill)
1.0 MPI 3.1 l (2.73 lmp qt.)
API Latest (SN Plus)
1.2 MPI 3.4 l (2.99 lmp qt.)
Manual Transmission fluid1.3~1.4 l
(1.21~1.23 lmp qt.)API Serviced GL-4, SAE 70W, TGO-9
(HYUNDAI genuine transmission
fluid)
- HK SYN MTF 70W
- SPIRAX S6 GHME 70W MTF
- GS MTF HD 70W
Automated Manual
Transmission fluid1.3~1.4 l
(1.21~1.23 lmp qt.)API Serviced GL-4, SAE 70W, TGO-9
(HYUNDAI genuine transmission
fluid)
- HK SYN MTF 70W
- SPIRAX S6 GHME 70W MTF
- GS MTF HD 70W
Coolant1.0 MPI4.49 l
(3.95 lmp qt.)MIXTURE, Antifreeze with water
(Ethylene glycol base coolant for
aluminium radiator)
1.2 MPI4.77 l
(4.20 lmp qt.)
Brake/Clutch fluid0.7~0.8 l
(0.62~0.7 lmp qt.)FMVSS116 DOT-4
Fuel 36 l (7.92 lmp gal.) -
*1 : Refer to the recommended SAE viscosity numbers on the next page.
*
2 : Engine oils labelled Energy Conserving Oil are now available. Along with other additional benefits, they con-
tribute to fuel economy by reducing the amount of fuel necessary to overcome engine friction. Often, these
improvements are difficult to measure in everyday driving, but in a year’s time, they can offer significant cost
and energy savings.

2-13
02
5HFRPPHQGHG6$(YLVFRVLW\QXPEHU
&$87,21
$OZD\VEHVXUHWRFOHDQWKHDUHDDURXQGDQ\ILOOHUSOXJGUDLQSOXJRUGLS-
stick before checking or draining any lubricant. This is especially impor-
tant in dusty or sandy areas and when the vehicle is used on unpaved
roads. Cleaning the plug and dipstick areas will prevent dirt and grit from
entering the engine and other mechanisms that could be damaged.
Engine oil viscosity (thickness) has an effect on fuel economy and cold weather
operating (engine start and engine oil flowability). Lower viscosity engine oils
can provide better fuel economy and cold weather performance, however, high-
er viscosity engine oils are required for satisfactory lubrication in hot weather.
Using oils of any viscosity other than those recommended could result in engine
damage.
When choosing an oil, consider the range of temperature your vehicle will be
operated in before the next oil change.
Proceed to select the recommended oil viscosity from the chart.
7HPSHUDWXUH5DQJHIRU6$(9LVFRVLW\1XPEHUV
Temperature°C
(°F)-30 -20 -10 0 10 20 30 40 50
-10 0 20 40 60 80 100 120
Petrol Engine Oil *1
20W-50
:
:
::::
*1 : For better fuel economy, it is recommended to use the engine oil of a viscosity grade SAE 0W-20 API Latest
(SN Plus). However, if the engine oil is not available in your country, select the proper engine oil using the
engine oil viscosity chart.

2-14
Vehicle information
NUMBER
ãVIN
ä
OAC3019021TU
„Frame number
The vehicle identification number
(VIN) is the number used in register-
ing your vehicle and in all legal mat-
ters pertaining to its ownership, etc.
The number is punched on the floor
under the driver seat. To check the
number, open the cover.
OAI3019021
„VIN label (if eqipped)
The VIN is also on a plate attached to
the top of the dashboard. The num-
ber on the plate can easily be seen
through the windscreen from outside.
VEHICLE IDENTIFICATION VEHICLE CERTIFICATION
LABEL
OAC3019022TU
The vehicle certification label
attached on the driver’s (or front pas-
senger’s) side centre pillar gives the
vehicle identification number (VIN).

2-15
02
PRESSURE LABEL
OAC3019023R
The tyres supplied on your new vehi-
cle are chosen to provide the best
performance for normal driving.
The tyre label located on the driver’s
side centre pillar gives the tyre pres-
sures recommended for your vehicle.
TYRE SPECIFICATION AND ENGINE NUMBER
OAC3019024TU
The engine number is stamped on
the engine block as shown in the
drawing.

2-16
Vehicle information
COMPRESSOR LABEL
OHC081001
A compressor label informs you the
type of compressor your vehicle is
equipped with such as model, suppli-
er part number, production number,
refrigerant (1) and refrigerant oil (2).
AIR CONDITIONER FUEL LABEL
ãIF EQUIPPED
ä
The fuel label is attached on the fuel
filler door.
OTM048455L
A. Octane rating of unleaded Petrol
1) RON/ROZ : Research Octane
Number
2) (R+M)/2, AKI : Anti Knock Index
B. Identifiers for Petrol-type fuels
Ú This symbol means usable fuel.
Do not use any other fuel.
C. For further details, refer to “Fuel
Requirement” in the Introduction
chapter.