HYUNDAI I10 2020 Owners Manual

6-75
06
Display in the Driving Assist
mode of the cluster
The driver can monitor the informa-
tion provided from ISLW system on
the LCD display.
ISLW screen will appear when you
select the Driving Assist mode tab
(
) on the LCD display if the sys-
tem is activated. For more details,
UHIHUWR

6-76
Whilst driving
2$&78
Check SLW (Speed Limit Warning)
system
The warning message appears for a
few seconds, when ISLW does not
properly operate. Then, the master
warning light (
) will illuminate.
We recommend that you have the
system checked by a HYUNDAI
authorised repairer.
/LPLWDWLRQVRIWKHV\VWHP
ISLW may not operate properly or
may not provide correct information
in the following situations.
When the traffic sign condition is
poor

6-77
06
When front visibility is poor

6-78
Whilst driving
Driver Attention Warning system dis-
plays the level of the driver’s fatigue
and inattention, considering the driv-
ing pattern, etc.
System setting and operation
System setting

6-79
0606
Display of the driver’s attention
level
2$&78
„System off
„Attentive driving
2$&78
„Inattentive driving
2$&78

6-80
Whilst driving
Resetting the system

6-81
06
NOTICE
Driver Attention Warning system
utilizes the front view camera on
the front windscreen for its opera-
tion. To keep the front view camera
in the best condition, you should
observe the followings:

6-82
Whilst driving
/HDGLQJ9HKLFOH'HSDUWXUH
Alert
After the vehicle in front departs, the
system informs it to the driver.
System setting
:LWKWKHHQJLQH21/HDGLQJ9HKLFOH
Departure Alert system turns on and
gets ready to be activated when the
‘User Settings o Driver Assistance
o DAW (Driver Attention Warning) o
/HDGLQJ 9HKLFOH 'HSDUWXUH $OHUW

6-83
0606
Cruise Control operation
2$&5
„Type A
2$&5
&58,6(LQGLFDWRU
(2) Set speed
The Cruise Control system allows
\RXWRGULYHDWVSHHGVDERYHPSK
 NPK ZLWKRXW GHSUHVVLQJ WKH
accelerator pedal.
WARNING
Take the following precautions:

6-84
Whilst driving
i Information
‡ 'uring normal cruise control opera-
tion, when the SE7 switch is activat-
ed or reactivated after applying the
brakes, the cruise control will acti-
vate after approximately 3 seconds.
7his delay is normal.
‡ Before activating the cruise control
function, the system will check to
verify that the brake switch is oper-
ating normally. 'epress the brake
pedal at least once after turning 21
the ignition or starting the vehicle.
Cruise control switch
2$,
CRUISE/7XUQV FUXLVH FRQ-
trol system on or
off.
5(65HVXPHVRULQFUHDVHVFUXLVH
control speed.
6(76HWVRUGHFUHDVHVFUXLVHFRQ-
trol speed.
&$1&(/&DQFHOV FUXLVH FRQWURO
operation.
To set Cruise Control speed
2$,
3XVK WKH &58,6( button
on the steering wheel to turn the
system on. The CRUISE/

indicator on the LCD display will
illuminate.
2. Accelerate to the desired speed,
ZKLFK PXVW EH PRUH WKDQ  PSK
NPK
i Information
For manual transmission vehicles, you
should depress the brake pedal at least
once to set the cruise control after
starting the engine.