clock setting HYUNDAI I20 2015 Owners Manual

)' 
#10*30-30.2+3%.,/3(21+2"1,/2*3!-$&3
''#)+*'&*+$)"*+(Clock (if equipped)To set the time:
The ignition switch must be in the
ACC position or the ON position.
1. Press the SETUP CLOCK button.
2. Select "Clock" →"Clock Settings"
by using the TUNE knob.
3. Set the clock by using the TUNE knob.
Digital clock (if equipped)
Whenever the battery terminals or
related fuses are disconnected, you
must reset the time.
When the ignition switch is in the
ACC or ON position, the clock but-
tons operate as follows:Press the "H" button to advance the
time displayed by one hour.Press the "M" button to advance the
time displayed by one minute.To change the 12 hour format to the
24 hour format, press the "H" and
"M" button simultaneously for more
than 4 seconds.
For example, if the "H" and "M" but-
ton is pressed when the time is 10:15
p.m., the display will change to 22:15
Do not adjust the clock while driv-
ing. You may lose your steering
control and cause severe personal
injury or accidents.
WARNING
OIB044038
Do not adjust the clock while driv-
ing. You may lose your steering
control and cause severe personal
injury or accidents.
WARNING

#!'%$&%" '&$
IInformation
• Up to 2000 phone numbers can be
downloaded from a single, paired
Bluetooth
®
device.
• If the caller’s number is listed in Contacts, the caller’s name will be
displayed. Otherwise, only the num-
ber will be displayed. In some
Bluetooth
®
devices, the phone num-
ber may not be displayed.
• In some Bluetooth
®
devices, the Use
Private feature may not be supported.
• In some Bluetooth®
devices, the
Switch feature may not be supported.
• The phone number may not be properly displayed in some
Bluetooth
®
devices.
• During a phone call on a Bluetooth
®
Handsfree, you cannot access other
modes, such as Radio and Setup.
• Depending on handset types, the in- call volume the other party hears
may differ. If the other party hears
your voice too low or too loud,
adjust the mic volume.
Phone settingsPress the
[PHONE]
button Select
[Phone settings].
• Moves to a screen of Phone Settings. Refer to Setup ➟ Phone
manual for more information.
SetupDisplayPress the
[SETUP/CLOCK]
button 
Select [Display].
• Media Display: When playing an MP3 file, select the desired display
info from [Folder/File] or
[Artist/Title/Album].
• Mode Popup: During [On] state, press the
[RADIO]
or
[MEDIA]
but-
ton to display the mode change
popup.
• Text Scroll: If MP3 file name is too long to display, the file name is
scrolled from right to left.
i

#
!'%$&%" '&$
SSoundPress the
[SETUP/CLOCK]
button 
Select [Sound].
• Position: Selects the sound position.
• Tone: Selects the sound tone.
• Speed Dependent Vol.: Controls the volume level automatically
according to the speed of the vehi-
cle.
Date/TimePress the
[SETUP/CLOCK]
button 
Select [Date/Time].
• Set Time: Adjusts the number cur- rently in focus to set the [hour], and
press the
TUNE
knob to set the
[minute] and [AM/PM].
• Time Format: Sets the 12/24 hour time format of the audio system.
• Set Date: Adjusts the number cur- rently in focus to make the settings
and press the
TUNE
knob to move
to the next settings.
• Display(Power Off): Displays time/date on screen when the
audio system turns power off.
Phone (if equipped)Add New DevicePress the
[SETUP/CLOCK]
button 
Select [Phone]  Select [Add New
Device].
• The following steps are the same as those described in the section
[Pairing a New Device] on the pre-
vious page.
Connect/Disconnect DevicePress the
[SETUP/CLOCK]
button 
Select [Phone]  Select [Paired
devices].
• Displays the paired Bluetooth
®
device list.
• From the paired device list, select the device you want to connect or
disconnect.
Information
• Displays the icons when Bluetooth
®
device is connected.
: An icon appears when you make
a Bluetooth
®Audio connection.
: An icon appears when you make
a Bluetooth®Handsfree connection.
• Only one Bluetooth
®
device can be
connected at a time.
• Bluetooth
®
Handsfree and
Bluetooth
®Audio functions are sup-
ported. Handsfree and audio-sup-
ported devices, such as a Bluetooth
®
smartphone or audio, will function
normally.
• If the system is not stable due to a vehicle- Bluetooth
®
device commu-
nication error, delete the paired
device on each device and pair/con-
nect the Bluetooth
®
device again.
i

##!'%$&%" '&$BBluetoothPress the
[SETUP]
button on the
audio system ➟ Select [Bluetooth].
• Connections: Control pairing, dele- tion, connection and disconnection
of Bluetooth
®
devices.
• Auto Connection Priority: Set the connection priority of B luetooth
®
devices when the vehicle is started.
• Download Contacts: Contacts can be downloaded from connectedBluetooth
®
devices.
Information
• When paired devices are deleted, the call history and contacts of the
device saved to the audio system are
deleted.
• For Bluetooth
®
connections with low
connection priority, some time may
be required for the connection to be
established.
• Contacts can be downloaded only from the currently connected
Bluetooth
®
device.
• If no Bluetooth
®
device is connected,
the Download Contacts button is
disabled.
SystemPress the
[SETUP]
button on the
audio system ➟ Select [System].
• Language: Change the user lan- guage.
• Default: Reset the audio system.
Information
The system resets to the default val-
ues, and all saved data and settings
are lost.Screen SaverSet the information displayed when
the audio system is switched off or
the screen is turned off.
Press the
[SETUP]
button on the
audio system ➟ Select [Screen
Saver].
• Analog: An analog clock is dis- played.
• Digital: A digital clock is displayed.
• None: No information is displayed.
Display OffTo prevent glare, the screen can be
turned off while the audio system in
operation.
Press the
[SETUP]
button on the
audio system ➟ Select [Display Off].
Information
Use ‘Screen Saver’ to set the informa-
tion to be displayed when the screen is
turned off.i
i
i