remote control HYUNDAI I20 2018 Owners Manual

)'
#10*30-30.2+3%.,/3(21+2"1,/2*3!-$&3
RRemote key (if equipped)Your HYUNDAI uses a remote key,
which you can use to lock or unlock
a door (and tailgate) and even start
the engine.
1. Door Lock
2. Door Unlock
3. Tailgate Unlock
LockingTo lock :
1. Close all doors, engine hood and
tailgate.
2. Press the Door Lock button (1) on the remote key.
3. The doors will lock. The hazard warning lights will blink once.
4. Make sure the doors are locked by checking the position of the door
lock button inside the vehicle.
UnlockingTo unlock:
1. Press the Door Unlock button (2)on the remote key.
2. The doors will unlock. The hazard warning lights will blink two times.
Information
After unlocking the doors, the doors
will lock automatically after 30 sec-
onds unless a door is opened.i
$

+(('#&"*+'
%+
OIB034040
Do not leave the keys in your vehi-
cle with unsupervised children.
Unattended children could place
the key in the ignition switch and
may operate power windows or
other controls, or even make the
vehicle move, which could result in
serious injury or death.
WARNING

SSteering wheel audio control
(if equipped)The steering wheel audio control but-
ton is installed to promote safe driving.
Do not operate audio remote control
buttons simultaneously.VOLUME (VOL +/-) (1)• Press the up button (+) to increase volume.
• Press the down button (-) to decrease volume.SEEK/PRESET ( / ) (2)If the SEEK/PRESET button is
pressed for 0.8 second or more, it
will work as follows in each mode.RADIO modeIt will function as the AUTO SEEK
select button. It will SEEK until next
channel is reached.MEDIA modeIt will function as the FF/REW button. If the SEEK/PRESET button is
pressed for less than 0.8 second, it
will work as follows in each mode.
RADIO modeIt will function as the PRESET STA-
TION select buttons.MEDIA modeIt will function as the TRACK
UP/DOWN button.MODE (3)Press the MODE button to toggle
between available Media sources
like Radio, USB, iPod, BT Audio,
AUX(Auxiliary).MUTE (4, if equipped)• Press the button to mute the
sound.
• Press the button again to activate the sound.
Detailed information for audio control
buttons is included in the following
pages in this chapter.
NOTICE
!'%$&%" '&$#
OIB047037OIB047168
■ Type A
■ Type B

#
!'%$&%" '&$
BBluetooth
®
Connection
Before you can use the Bluetooth
®
feature, you must first pair/connect
your Bluetooth
®
device to your car.
Pairing a New DevicePress the
[PHONE]
button in the
head unit or
[CALL]
button in the
steering wheel remote control.
In your Bluetooth
®
device,
1. Pair your car after your Bluetooth
®
device detects the Bluetooth
®
device.
2. Enter the passkey(0000) or accept the authorization popup.
3. Connect Bluetooth
®. For devices that require passkey
confirmation, a 6-digit passkey input
screen is shown in the Bluetooth
®
device & Audio. After confirming that
the 6-digit passkey on the audio
screen and the Bluetooth
®
device
are identical, select [OK] in your
Bluetooth
®
device.
Information
The 6-digit passkey in the image
above is an example. Refer to your
vehicle for the actual passkey.
Information
• Up to 5 Bluetooth
®
devices can be
paired.
• The default passkey is 0000.
• During a B luetooth®
device connec-
tion, another device cannot be paired.
• The Vehicle Name above is an exam- ple. Check the actual information
on the product.
• Pairing and connecting a Bluetooth
®
enabled Bluetooth
®
device will work only when the
Bluetooth
®
option within your
Bluetooth
®
device has been turned
on. (Methods of turning on the
Bluetooth
®enabled feature may dif-
fer depending on the Bluetooth
®
device.)
• After pairing is complete, a contacts download request is sent to the
Bluetooth
®
device. Some Bluetooth
®
devices may require confirmation
upon receiving a download request.
Ensure your Bluetooth
®
device
accepts the connection. Refer to your
phone’s user manual for additional
information regarding phone pairing
and connections.
i
i

#!'%$&%" '&$Connecting Bluetooth
®
Devices
Press the [
[
PHONE]
button in the
head unit or
[CALL]
button in the
steering wheel remote control 
Select the name of the device to con-
nect Connect Bluetooth
®.
• Connects the Bluetooth®
devices
that you add.
Information
• Only one Bluetooth
®
device can be
connected at a time.
• Bluetooth
®features supported with-
in the vehicle are as follows. Some
features may not be supported
depending on your Bluetooth
®
device.
- Outgoing/Incoming Handsfree calls
- Operations during a call: Switch to Private, Switch to call waiting,
MIC on/off
- Downloading Call History
- Downloading Contacts
- Bluetooth
®device Auto Connection
- Bluetooth®Audio Streaming
Bluetooth PhoneFavoritesPress the
[PHONE]
button Select
[Favorites].
• Displays Phone Menu screen.
• The connected device name is dis- played in the top of the display.
• : Call signal strength indicator.
• : Battery level of the Bluetooth
®
devices connected.
i

#
!'%$&%" '&$
(Continued)
• Even if the Bluetooth
®
device is dis-
connected, the downloaded data will
remain. (Note that deleting a paired
device will also delete all down-
loaded Contacts and Call History
data)
• Downloaded phone numbers may be lost depending on the condition
of the head unit. Keep your impor-
tant data in a safe place.
• The status bar displays a ( ) while downloading contacts.
• The download will not be available if the contacts download function is
turned off on your Bluetooth
®
device.
• Phone contact names should be saved in English or they may not be
displayed correctly.
• The time of contacts/call history download may differ depending on
the Bluetooth
®
devices.
• Some devices require a device authentication for downloading
your contacts. If download fails,
check your phone screen and con-
firm the download if necessary.
Accept/Reject CallIf there is an incoming call, a popup
message will appear.
• To answer the incoming call, select [Accept] on the screen or press the[
[ CALL]
button on the steering wheel
remote control.
• To reject the call, select [Reject] on the screen or press the
[END]
but-
ton on the steering wheel control.
Information
In some Bluetooth
®
devices, the
caller’s number may not be displayed,
and the Reject feature may not be sup-
ported.
Using the Menu During a Phone CallWhen making a call, you can use the
following menu items.
(1) Private: Switches a voice call from the car Hands-free to the
Bluetooth
®
device.
(2) End: Ends a call.
Displays Menu Popup when pressing
the
[MENU]
button.
• Outgoing Volume: Displays the Mic
Volume settings. You can adjust the
in-call volume that the other party
hears (level 1 - 5).
i

#
!'%$&%" '&$
SSteering wheel remote control❈The actual features in the car may
differ from the illustration. (1)
MUTE
• Press Button to mutes the audio (It
will be pause in BT music mode).
• Mutes the microphone during a call.
(2)
VOLUME
• Press to adjust the volume.
(3)
CALL
• Pressing the button. - If not in Bluetooth
®
Handsfree
mode or receiving a phone call.
First press: Display Dial Number
screen.
Second press: Automatically dis-
play the most recently Dialed
Call number.
Third press: Dial the phone num-
ber entered.
- Press in the Incoming Call notifi- cation screen to accept the
phone call.
• In 3-way call, press in Bluetooth hands-free mode to switch to wait-
ing call.
• Single press, puts call on hold to un hold press once again. • Pressing and holding the button.
(more than 1.0 second)
- If not in Bluetooth
®
Handsfree
mode or receiving a phone call,
the most recently Dialed Call
number is dialed.
- Press in Bluetooth
®
Handsfree
mode to transfer the call to your
cell phone.
- Press in cell phone mode to switch to Bluetooth
®
Handsfree
mode.
(4)
END
• Press in Bluetooth
®
Handsfree
mode to end the phone call.
• Press in the incoming call screen to reject the call.

#!'%$&%" '&$
(( Continued)
• Do not place beverages close to the audio system. Spilling bever-
ages may lead to system m alfunc-
tion.
• In case of product malfunction, please contact your place of pur-
chase or After Service c enter.
• Placing the audio system within an electromagnetic environment may
result in noise interference.
• Prevent caustic solutions such as perfume and cosmetic oil from
contacting the dashboard because
they may cause damage or discol-
oration.
Information on status iconsIcons showing audio status are shown
in the upper-right corner of the screen.
Icon
Description
Mute
Mute engaged
Bluetooth
Remote
Controller
Bluetooth Remote
Control available
Battery
Remaining battery life
of a connected
Bluetooth
®device
Handsfree +
Audio stream-
ing connection
Bluetooth
®
Handsfree
call and audio stream-
ing available
Handsfree
connection
Bluetooth
®
Handsfree
call available
Bluetooth
®
audio streaming
Bluetooth
®
audio
streaming available
Downloading contacts
Downloading contacts
through Bluetooth
®
wireless communica-
tions
Icon
Description
Line busy
Phone call in progress
Mute mic
Mic muted during a
call (caller cannot
hear your voice)
Phone signal strength
Display the phone sig-
nal strength for a cell
phone connected by
Bluetooth
®

#
!'%$&%" '&$
PPairing a Bluetooth
®
device
Information on pairing Bluetooth
®
devices• Pairing refers to the process ofpairing Bluetooth
®
cell phones or
devices with the system prior to
connection. This is a necessary
procedure for Bluetooth
®
connec-
tion and usage.
• Up to five devices can be paired.
• Pairing Bluetooth
®
device is not
allowed while vehicle is moving.
Pairing the first Bluetooth
®
devices
Press the
[PHONE]
button on the
audio system or the
[CALL]
button on
the steering wheel remote control ➟
Search for the vehicle from the
Bluetooth
®
device, and pair ➟ Enter
t h e p a s s key on the B l u e t o o t h
®
device
or approve passkey ➟ Bluetooth
®
pairing completed.
1. When the
[PHONE]
button on the
audio system or the [CALL]
button
on the steering wheel remote con-
trol is pressed, the following
screen is displayed. Devices can
now be paired. (1) Vehicle name: Searched name in
Bluetooth
®
device.
Information
The vehicle name in the image above
is an example. Refer to your device for
the actual name of your device.
2. Search for available Bluetooth
®
devices in the Bluetooth
®
menu of
your Bluetooth
®
device (cell
phone, etc.).
3. Confirm that the vehicle name in your Bluetooth
®
device matches
the vehicle name shown on the
audio screen, then select it. 4-1. For devices that require passkey
entry, a passkey entry screen is
shown on your Bluetooth
®
device.
- Enter the passkey ‘0000’, in your Bluetooth
®
device.
4-2. For devices that require passkey confirmation, the following
screen is shown on the audio
system. A 6-digit passkey input
screen is shown in the
Bluetooth
®
device.
- After confirming that the 6-digit passkey on the audio screen
and the Bluetooth
®
device are
identical, select [OK] in your
Bluetooth
® device.
i

#
!'%$&%" '&$
IInformation
The 6-digit passkey in the image
above is an example. Refer to your
vehicle for the actual passkey.Pairing a second Bluetooth
®
device
Press the
[SETUP]
button on the
audio system ➟ Select [Bluetooth] ➟
Select [Connections] ➟ Select [Add
New].
- The pairing procedure from this point is identical to [Pairing the first
Bluetooth device].
Information
• Bluetooth
®
standby mode lasts for
three minutes. If a device is not
paired within three minutes, pairing
is canceled. Start over from the
beginning.
• For most Bluetooth
®
devices, a con-
nection is established automatically
after pairing. Some devices, howev-
er, require separate confirmation
when connecting after pairing. Be
sure to chec k your Bluetooth
®
device
after pairing to confirm that it has
connected.
Connecting Bluetooth
®
devices
If there are no connected devicesPress the
[PHONE]
button on the
audio system or the [CALL]
button in
the steering wheel remote control ➟
List of paired Bluetooth
®
devices ➟
Select the desired Bluetooth
®
device
from the list ➟ Connect Bluetooth
®.
i
i

#
!'%$&%" '&$
If there are connected devicesPress the [
[
PHONE]
button on the
audio system ➟ Select [Settings] ➟
Select [Connections] ➟Select
Bluetooth
®
device to connect ➟Select
[Connect] ➟Connect Bluetooth
®.
Information
• Only two Bluetooth
®
devices can be
connected. One for Calls and Music
and the other for Remote control.
• When a Bluetooth
®device is connect-
ed, other devices cannot be paired.
Accepting/rejecting phone callsReceiving phone calls with
Bluetooth
®
connected.
(1) Caller name: If the caller number is in your contacts, the correspon-
ding name is displayed.
(2) Incoming phone number: Incoming phone number is displayed.
(3) Accept: Accept call.
(4) Reject: Reject call.
Information
• When the incoming call screen is displayed, audio mode and the set-
tings screen cannot be shown. Only
call volume control is supported.
• Some Bluetooth
®may not support the
call reject function.
• Some Bluetooth®
devices may not
support the phone number display
function.
i
i