Efficiency HYUNDAI I20 2023 Owners Manual

2-20
Vehicle information
RECOMMENDED LUBRICANTS AND CAPACITIES
To help achieve proper engine and powertrain performance and durability, use only
lubricants of the proper quality. The correct lubricants also help promote engine
efficiency that results in improved fuel economy.
These lubricants and fluids are recommended for use in your vehicle.
Lubricant Volume Classification
Engine oil *1
(drain and refill)Smartstream G 1.0
T-GDi/Smartstream *2
G1.0 T-GDi (48V) MHEV
b,PSTWV
Full synthetic SAE 0W20,
API SN PLUS/SP or ILSAC
GF-6
Smartstream G1.2*
2 
b,PSTWV
Petrol 1.4 *
3 
b,PSTWVFull synthetic SAE 5W20,
API Latest(ILSAC Latest)
Manual
transmission
fluidSmartstream G 1.0
T-GDi/Smartstream
G1.0 T-GDi (48V) MHEVa
b
(1.3~1.4 Imp. qts.)API GL-4, SAE 70W
- SK : HK SYN MTF 70W
- H.K.SHELL : SPIRAX S6
GHME 70W MTF
- GS CALTEX : GS MTF HD
70W Smartstream G 1.2a
b
(1.1~1.2 Imp. qts.)
Petrol 1.4a
b
(1.3~1.4 Imp. qts.)
Intelligent
manual
transmission
system
actuator fluidSmartstream G1.0
T-GDi (48V) MHEV
b86TWSAE J1704 DOT-4 LV,
ISO4925 CLASS-6, FMVSS116
DOT-4, FMVSS116 DOT-3
Automatic
transmission
fluidPetrol 1.4
b,PSTWVATF SP-IV
- SK ATF SP-IV
- MICHANG ATF SP-IV
- NOCA ATF SP-IV
- Hyundai Genuine ATF SP-IV
- GS ATF SP-IV
Dual clutch
transmission
fluidSmartstream G 1.0
T-GDi/Smartstream
G1.0 T-GDi (48V) MHEVa
b
(1.4~1.5 Imp. qts.)API GL-4, SAE 70W
HK D DCTF TGO-10 (SK)
SPIRAX S6 GHDE 70W DCTF
(H.K.SHELL)
7 DCTF HKM (S-OIL)
*1 : Refer to the recommended SAE viscosity numbers on the next page.
*2 : Requires <API SN PLUS (or Above) Full synthetic> grade engine oil. If a lower grade engine oil
(mineral oil including Semi-synthetic) is used, then the engine oil and engine oil filter must be
replaced as indicated severe maintenance condition
*
3 : Requires <API Latest(ILSAC Latest) Full synthetic> grade engine oil. If a lower grade engine
oil (mineral oil including Semi-synthetic) is used, then the engine oil and engine oil filter must
be replaced as indicated severe maintenance condition

5-77
05
WARNING
Windscreen heating
Do not use the
or position
during cooling operation in extremely
humid weather. The difference
between the temperature of the
outside air and that of the windscreen
could cause the outer surface of the
windscreen to fog up, causing loss of
visibility. In this case, set the mode
selection knob or button to the

position and fan speed control knob or
button to lower speed.

[ )RUPD[LPXPGHIURVWSHUIRUPDQFH
set the temperature control knob
to the highest temperature setting
(rotated all the way to the right) and
the fan speed control to the highest
setting.

[ ,IZDUPDLUWRWKHIORRULVGHVLUHG
whilst defrosting or defogging, set the
mode to the floor-defrost position.

[ %HIRUHGULYLQJFOHDUDOOVQRZDQGLFH
from the windscreen, rear window,
outside rear view mirrors, and all side
windows.

[ &OHDUDOOVQRZDQGLFHIURPWKH
bonnet and air inlet in the cowl grill
to improve heater and defroster
efficiency and to reduce the
probability of fogging up inside of the
windscreen.
i Information
,IWKHHQJLQHWHPSHUDWXUHLVVWLOOFROGDIWHU
starting, then a brief engine warm up
period may be required for the vented air
flow to become warm or hot.
Manual climate control system
To defog inside windscreen
OBC3050118
1. Select any fan speed except
"0"position.
2. Select the desired temperature.
3. Select the
or position.
4. The outside (fresh) air will be selected
automatically. Additionally, the
air conditioning (if equipped) will
automatically operate if the mode is
selected to the
position.
If the air conditioning and outside
(fresh) air position are not selected
automatically, press the corresponding
button manually.
WINDSCREEN DEFROSTING AND DEFOGGING

6-27
06

[The dual clutch transmission
incorporates a dry-type dual clutch
mechanism, which allows for better
acceleration performance and
increased fuel efficiency whilst driving.
But it differs from a conventional
automatic transmission because
it does not incorporate a torque
converter. Instead, the transition from
one gear to the next is managed by
clutch slip, especially at lower speeds.
As a result, shifts are sometimes more
noticeable, and a light vibration can be
felt as the transmission shaft speed is
matched with the engine shaft speed.
This is a normal condition of the dual
clutch transmission.

[The dry-type clutch transfers torque
more directly and provides a direct-
drive feeling which may feel different
from a conventional automatic
transmission. This may be more
noticeable when launching the vehicle
from a stop or when traveling at low,
stop-and-go vehicle speeds.

[When rapidly accelerating from a
lower vehicle speed, the engine
rpm may increase dramatically as a
result of clutch slip as the dual clutch
transmission selects the correct gear.
This is a normal condition.

[When accelerating from a stop on an
incline, press the accelerator smoothly
and gradually to avoid any shudder
feeling or jerkiness.

[When traveling at a lower vehicle
speed, if you release the accelerator
pedal quickly, you may feel engine
braking before the transmission
changes gears. This engine braking
feeling is similar to operating a manual
transmission at low speed.

[When driving downhill, you may
wish to move the gear shift lever to
Manual Shift mode and downshift to
a lower gear in order to control your
speed without using the brake pedal
excessively.
[When you turn the engine on and off,
you may hear clicking sounds as the
system goes through a self-test. This
is a normal sound for the dual clutch
transmission.

[During the first 1000 miles (1,500 km),
you may feel that the vehicle may not
be smooth when accelerating at low
speed. During this break-in period, the
shift quality and performance of your
new vehicle is continuously optimized.
WARNING
To reduce the risk of serious injury or
death:

[ALWAYS check the surrounding
areas near your vehicle for people,
especially children, before shifting a
vehicle into D (Drive) or R (Reverse).

[Before leaving the driver’s seat,
always make sure the shift lever
is in the P (Park) position, then set
the parking brake, and place the
ignition switch in the LOCK/OFF
position. Unexpected and sudden
vehicle movement can occur if these
precautions are not followed.

[Do not use aggressive engine braking
(shifting from a higher gear to a lower
gear) on slippery roads. This could
cause the tyres to slip and may result
in an accident.

8-12
Emergency situations
Tyre pressure monitoring
system
WARNING
Over-inflation or under-inflation can
reduce tyre life, adversely affect
vehicle handling, and lead to sudden
tyre failure that may cause loss of
vehicle control resulting in an accident.
Each tyre, including the spare (if
provided), should be checked monthly
when cold and inflated to the inflation
pressure recommended by the vehicle
manufacturer on the vehicle placard
or tyre inflation pressure label. (If your
vehicle has tyres of a different size
than the size indicated on the vehicle
placard or tyre inflation pressure label,
you should determine the proper tyre
inflation pressure for those tyres.)
As an added safety feature, your
vehicle has been equipped with a tyre
pressure monitoring system (TPMS)
that illuminates a low tyre pressure
telltale when one or more of your
tyres is significantly under-inflated.
Accordingly, when the low tyre pressure
telltale illuminates, you should stop and
check your tyres as soon as possible,
and inflate them to the proper pressure.
Driving on a significantly under-inflated
tyre causes the tyre to overheat and can
lead to tyre failure.
Under-inflation also reduces fuel
efficiency and tyre tread life, and
may affect the vehicle’s handling and
stopping ability.
Please note that the TPMS is not a
substitute for proper tyre maintenance,
and it is the driver’s responsibility to
maintain correct tyre pressure, even if
under-inflation has not reached the level
to trigger illumination of the TPMS low
tyre pressure telltale.
Your vehicle has also been equipped
with a TPMS malfunction indicator
to indicate when the system is
not operating properly. The TPMS
malfunction indicator is combined with
the low tyre pressure telltale. When
the system detects a malfunction, the
telltale will flash for approximately one
minute and then remain continuously
illuminated. This sequence will continue
upon subsequent vehicle start-ups as
long as the malfunction exists.
When the malfunction indicator is
illuminated, the system may not be able
to detect or signal low tyre pressure as
intended. TPMS malfunctions may occur
for a variety of reasons, including the
installation of replacement or alternate
tyres or wheels on the vehicle that
prevent the TPMS from functioning
properly.
Always check the TPMS malfunction
telltale after replacing one or more tyres
or wheels on your vehicle to ensure that
the replacement or alternate tyres and
wheels allow the TPMS to continue to
function properly.
NOTICE
If any of the below happens, we
recommend that you have the system
checked by a HYUNDAI authorised
repairer.
1. The Low Tyre Pressure Telltale/
TPMS Malfunction Indicator does not
illuminate for 3 seconds when the
Engine Start/Stop button is pressed
to the ON position or when the
engine is running.
2. The TPMS Malfunction Indicator
remains illuminated after blinking for
approximately 1 minute.
3. The Low Tyre Pressure Position
Telltale remains illuminated.