buttons HYUNDAI I20 2023 Owners Manual

5-68
Convenient features
Manual heating and air conditioning
The heating and cooling system can be controlled manually by pushing buttons other
than the AUTO button. In this case, the system works sequentially according to the
order of buttons selected. When pressing any button except the AUTO button whilst
using automatic operation, the functions not selected will be controlled automatically.
1. Start the engine.
2. Set the mode to the desired position.
To improve the effectiveness of heating and cooling, select the mode according to
the following:
- Heating :
- Cooling :
3. Set the temperature control to the desired position.
4. Set the air intake control to fresh mode.
5. Set the fan speed control to the desired speed.
6. If air conditioning is desired, turn the air conditioning system on.
7. Press the AUTO button in order to convert to full automatic control of the system.
Mode selection
OBC3050102R

5-72
Convenient features
Air conditioning
OBC3050116R
Push the A/C button to manually turn
the air conditioning system on (indicator
light will illuminate).
Push the button again to turn the air
conditioning system off.
OFF mode
OBC3050117R
Push the OFF button of the front to turn
off the climate control system.
You can still operate the air intake
buttons as long as the ignition switch is
in the ON position.
However, the air climate control system
turns on when you push the mode
selection buttons.
System operation
Ventilation
1. Select the Face Level mode.
2. Set the air intake control to fresh
mode.
3. Set the temperature control to the
desired position.
4. Set the fan speed control to the
desired speed.
Heating
1. Select the Floor Level mode.
2. Set the air intake control to fresh
mode.
3. Set the temperature control to the
desired position.
4. Set the fan speed control to the
desired speed.
5. If desired, turn the air conditioning ON
with the temperature control knob set
to heat in order to dehumidify the air
before it enters into the cabin.
If the windscreen fogs up, select the
Floor & Defrost
mode or press the
Front Defrost mode.

5-108
Convenient features
7XUQLQJWKHGLVSOD\RQRURII
To prevent glare, you can turn off the
screen. The screen can be turned off
only whilst the system is on.
1. On the control panel, press the
[0(18&/2&.] button.
2. When the option selection window
displays, turn the [781(] knob to
select 'LVSOD\RII, and then press the
knob.

[To turn the screen back on, press
any of the control panel buttons.
*HWWLQJWRNQRZWKHEDVLF
RSHUDWLRQV
You can select an item or adjust the
settings by using the number buttons
and the [781(] knob on the control
panel.
Selecting an item
1XPEHUHGLWHPV
Press the corresponding number button.
1XPEHUOHVVLWHPV
Turn the [781(] knob to select the
desired item, and then press the knob.
Adjusting the settings
Turn the [781(] knob to adjust the
value, and then press the knob to save
changes.
Turn the [781(] knob to the right to
increase the value and turn the [781(]
knob to the left to decrease the value.
❈ The system’s actual appearance and layout may differ depending on the vehicle
model and specification.