boot Hyundai Ioniq Hybrid 2017 Multimedia Manual

Starting the System for the First Time I 1-9
01
Starting the System for the
First Time
Turning the System On/Off
Press the engine start button or set the
ignition key to On or ACC. Each time you
turn on the system, a boot logo and safety
warning will appear.
Pressing the power key on the head unit
will display the user confirm screen. To
change the system language between
English, French, Spanish and Korean
select the Change
Language button.
NOTICE
You cannot operate the system while it is
booting up. It may take some time for all of
features of the system, particularly the voice
recognition system, to be ready for use.
Pressing and holding the power key on the
head unit will turn off the system.
You can change Screen Saver Settings
in Setup to display a clock on the Screen
Saver.
Information

If you turn off the system during a phone call
using the Hands-free feature, then the call will
automatically switch to your mobile phone.
NOTICE
Check the volume when turning on the
system. Before turning on the system, adjust
the volume to a reasonable level.
System Reset
The System Reset function restores the
system when it is not operating correctly.
Press and hold the RESET
key for a sec-
ond or longer. (It is recommended that you
press the RESET
key using a tool, such as
a pin or a clip.)
NOTICE
Resetting the system restores all existing
settings and configurations (e.g. volume,
display, etc.) back to their factory defaults.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


)@"&
)&7
@(<64"@&6>"7/@1"35JOEE





ß
1



ß
1


Before Using the Bluetooth® Handsfree I 4-3
04
CAUTIONS upon Connecting
Bluetooth® Phone
•
Before connecting the head unit with
the mobile phone, check to see that the
mobile phone supports Bluetooth
® fea-
tures
•
Even if the phone supports
Bluetooth®
Wireless Technology, the phone will
not be found during device searches if
the phone has been set to hidden state
or the Bluetooth
® power is turned off.
Disable the hidden state or turn on the
Bluetooth
® power prior to searching/
connecting with the head unit.
•
If Auto Connection is used, the
Bluetooth
® phone is automatically con-
nected when the ignition is turned on,
making it unnecessary to have to con-
nect the phone with the head unit every
time. •
If you do not want automatic connection
with your Bluetooth
® device, turn the
Bluetooth® feature off of the Bluetooth®
device.
•
Park the vehicle when connecting the
head unit with the mobile phone.
•
Bluetooth
® connection may become
intermittently disconnected in some
mobile phones. Follow these steps to try
again.
1. Turn the Bluetooth
® function within
the mobile phone OFF/ON and try
again.
2. Turn the mobile phone power OFF/
ON and try again.
3. Completely remove the mobile phone
battery, reboot, and then again.
4. Reboot the Multimedia System and
try again.
5. Delete all paired devices from both of
Phone and Head Unit sides and then
try again •
The Handsfree call volume and quality
may differ depending on the mobile
phone.
•
Pairing Bluetooth
® devices and use of
other Bluetooth® features are not sup-
ported when the vehicle is in motion. For
safety, please first park your vehicle.
•
If you continue having issue download-
ing your contacts to your vehicle, con-
tact your mobile phone provider.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


)@"&
)&7
@(<64"@&6>"7/@1"35JOEE





ß
1



ß
1


9-2 I Other Features
Camera
WARNING
- Backing Up & Using Camera
• Never rely solely on the rear view camera
when backing up. Prior to entering your
vehicle always do a visual check of the area
behind your vehicle, and before backing up
be aware of your surroundings and supple-
ment the rear view camera by looking over
your shoulders and checking your rear view
mirrors. Due to the difficulty of ensuring that
the area behind you remains clear, always
back up slowly and stop immediately if you
even suspect that a person, and especially
a child, might be behind you.
Information
The camera screen shown while the system
boots up does not display any text or buttons.
Steering-linked camera
•
This device is connected to a rear
detection camera to see behind the car
for safe reversing.
•
The Rear View Camera turns on auto-
matically if you shift the gear to R when
the power is on or the engine has
started.
•
While the device boots up, shift the gear
to "R" to activate the rear detection cam-
eras. Shift the gear to another position
to deactivate the rear detection camera.
NOTICE
A wide-angle lens is installed as the rear
detection camera to get a wider view, so
there may be some difference between
the actual distance and the distance that
appears. on-screen. For safety, make sure to
view the back, right, and left sides of the car
for yourself.
The color of the parking guidelines displayed
in the picture may differ from the actual
screen.
When booted up, blinking may occur when
you switch to a UI screen.
Name Description
Red LineAbout 0.5m from the
rear bumper
Yellow Line 1About 1m from the rear
bumper
Yellow Line 2About 3m from the rear
bumper
Yellow Line 3Trajectory of the wheel
on the driver’s side
Yellow Line 4Trajectory of the wheel
on the passenger side
Blue LineNeutral steering trajec-
tory
As you reverse your car and monitor the
area behind your car, the steering-linked
driving trajectory and the neutral driving
trajectory are both displayed.
Other Features
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


)@"&
)&7
@(<64"@&6>"7/@1"35JOEE





ß
1



ß
1


Setup I 10-11
10
Screen Saver Settings
You can select any of the following screen
formats to be displayed when the screen
or power is turned off.
•
Digital clock and date
•
Analog clock and date
•
No display
System Info
At the System Info screen, software ver-
sion information, updates, and storage
status details are available.
Features Description
SW InfoSystem version informa-
tion and update details are
available.
Select the Update button
to update the system. After
update is complete, the
system will reboot auto-
matically.
StorageDisplays the memory space
available for media files
and applications.
System Update
At the System Info screen, insert the
updated memory (USB or SD card) with
the latest file downloaded, and then select
the
Update button to begin updating. The
system will then reboot automatically.
Information
This product needs supplemented software
updates, additional new functions, and
renewed maps, which collectively may take
some time to complete, depending on the
amount of data.
CAUTION
If the power is disconnected or the USB or
SD card is removed during an update, the
data might be damaged. Please wait until the
update is complete while the engine is on.
)@"&
)&7
@(<64"@&6>"7/@1"35JOEE


)@"&
)&7
@(<64"@&6>"7/@1"35JOEE





ß
1



ß
1